• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2006년도 추계학술대회
• /
• pp.560-570
• /
• 2006

This paper proposes a selectively cumulative sum (S-CUSUM) control chart with variable sampling intervals (VSI) for detecting shifts in the process mean. The basic idea of the VSI S-CUSUM chart is to adjust sampling intervals and to accumulate previous samples selectively in order to increase the sensitivity. The VSI S-CUSUM chart employs a threshold limit to determine whether to increase sampling rate as well as to accumulate previous samples or not. If a standardized control statistic falls outside the threshold limit, the next sample is taken with higher sampling rate and is accumulated to calculate the next control statistic. If the control statistic falls within the threshold limit, the next sample is taken with lower sampling rate and only the sample is used to get the control statistic. The VSI S-CUSUM chart produces an 'out-of-control' signal either when any control statistic falls outside the control limit or when L-consecutive control statistics fall outside the threshold limit. The number L is a decision variable and is called a 'control length'. A Markov chain model is employed to describe the VSI S-CUSUM sampling process. Some useful formulae related to the steady state average time-to signal (ATS) for an in-control state and out-of-control state are derived in closed forms. A statistical design procedure for the VSI S-CUSUM chart is proposed. Comparative studies show that the proposed VSI S-CUSUM chart is uniformly superior to the VSI CUSUM chart or to the Exponentially Weighted Moving Average (EWMA) chart with respect to the ATS performance.

• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.2172-2177
• /
• 2015

상수 모듈러스 오차의 확률을 영으로 줄이는 등화 알고리듬에 결정 궤환 방식이 도입된 DF-MZEP-CME (decision feedback - maximum zero-error probability for constant modulus errors) 알고리듬은 채널 왜곡 보상에서 보다 향상된 성능을 보인다. 그러나 이 DF-MZEP-CME 알고리듬은 기울기 계산에서 샘플 사이즈에 비례하는 계산량을 가지게 되어 구현상 장애요인으로 작용한다. 이 논문에서는 DF-MZEP-CME 알고리듬의 기울기를 반복적으로 추정하도록 하여 계산량이 샘플 사이즈와 무관하게 함으로서 계산량 문제를 해결한다. 샘플 사이즈 N 에 대해 기존 알고리듬이 10N 의 곱셈량을 가지지만 제안한 방식은 샘플 사이즈와 무관하게 단지 20 번의 곱셈을 수행한다. 또한 제안한 방식의 기울기 계산이 초기상태로부터 안정 상태로 넘어갈 때 연속성을 유지하는 것으로 나타나 오차 전파에 예민한 결정 궤환 방식에 매우 적합한 알고리듬으로 판단된다.

• 한국대기환경학회지
• /
• 제25권1호
• /
• pp.38-45
• /
• 2009

Since the seventies and the oil crisis, energy-saving measures have led to a reduction in the ventilation of room. The use of synthetic materials which emit various chemical substances had led to an increase in the concentration of indoor pollutants. "Sick building syndrome (SBS)" and "Sick house syndrome (SHS)" are worldwide problems. Also, the number of complaints about indoor air pollution caused by VOCs (Volatile organic compound) and HCHO (Formaldehyde) has increased. It is important that evaluating and understanding emission of indoor air pollutant from building materials. The object of this study was to evaluate emission test method for flooring such as wood based flooring, carpet tile, rubber tile, PVC sheet and tile, and to determine emission of TVOC and form-aldehyde. The quantity of TVOC and carbonyl compounds emission were sampled and measured by Tenax TA and gas chromatography/mass spectrometry (GC/MSD), 2,4-DNPH cartrige with ozone scrubber and high performance liquid from flooring. The TVOC concentration emitted from carpet tile was ($7.419\;mg/m^2 h$) the highest among 5 groups of test materials. In wood based flooring and PVC tile, the emitted concentration of toluene was high. And the dodecane emission was highest in carpet. The concentration of TVOC decreased by an increase in emission test period. After 7 days, the concentration of TVOC from floorings were about 50% below of the concentration at the first day. TVOC emission from wood based flooring, carpet tile, rubber tile, PVC sheet and tile were decreased in 28 days and remained steady after about 15 days. The concentration of formaldehyde emission from floorings showed extremely low.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.99-114
• /
• 2003

This paper presents a feasible development on a highly accurate quick response adjustable speed drive implementation fur general purpose induction motor which operates on the basis of sensorless slip frequency type vector controlled sine-wave PWM inverter with an automatic tuning machine parameter estimation schemes. In the first place, the sensorless vector control theory on the three-phase voltage source-fed inverter induction motor drive system is developed in slip frequency based vector control principle. In particular, the essential procedure and considerations to measure and estimate the exact stator and rotor circuit parameters of general purpose induction motor are discussed under its operating conditions. The speed regulation characteristics of induction motor operated by the three-phase voltage-fed type current controlled PWM inverter using IGBT's is illustrated and evaluated fur machine parameter variations under the actual conditions of low frequency and high frequency operations for the load torque. In the second place, the variable speed induction motor drive system, employing sensorless vector control scheme which is based on three -phase high frequency carrier PWM inverter with automatic toning estimation schemes of the temperature -dependent and -independent machine circuit parameters, is practically implemented using DSP-based controller. Finally, the dynamic speed response performances for largely changed load torque disturbances as well as steady state speed vs. torque characteristics of this induction motor control implementation are illustrated and discussed from an experimental point of view.

• 전력전자학회논문지
• /
• 제8권2호
• /
• pp.116-127
• /
• 2003

본 논문에서는 UPS 인버터의 성능 개선을 위하여 출력측 LC 필터의 커패시터 전압과 전류의 2중 제어루프를 구성하고, 2중 제어루프에 디지털 제어시스템을 채택하였다 또한, 디지털 제어기의 연산지연시간을 보상하기 위하여 이러한 연산지연시간을 인버터 플랜트의 고유한 파라미터로 가정하고, 플랜트 모델에 포함시켜 모델링 하였다. UPS 인버터 출련전압의 과도상태 응답특실을 개선하고, 파라미터 변동에 강인한 특성을 얻기 위하여 2중 제어루프에서 내부 전류 제어루프는 내부 모델 제어기를 제안하였다. UPS 인버터 출력전압의 0의 정상상태 오차를 얻기 위하여 외부 전압 제어루프는 비례 제어기와 공진 제어기를 병렬로 연결한 비례-공진 진압제어기를 제안하였다.

• 한국통신학회논문지
• /
• 제36권10C호
• /
• pp.621-628
• /
• 2011

영상에서 피부색은 얼굴 영상 기반의 검출 및 인식 시스템에서 중요한 단서로 사용되지만 영상 획득시의 광원에 따라 상이하게 표현되기 때문에 사용의 어려움이 있다. 이러한 문제를 위해 본 논문에서는 Retinex, Gray World, White Patch, Simplified Horn, Shades of grey, 그리고 Edge-Based color constancy 색 항등성 기법을 대상으로 피부색 복원에 관한 성능을 비교하고, 자연 영상을 이용하여 피부색 검출 성능을 평가한다. 이를 위해 Caltech Face Database의 영상들에 유색 광원의 효과를 부가하여 생성된 실험 영상을 생성했다. 이후 각 기법에 따른 피부색 복원의 일관성을 수치적으로 평가하기 위하여 Cb-Cr 히스토그램을 기반으로 결과 영상들의 표준편차를 계산하였으며, 피부색 검출 성능 실험을 위해서 YCbCr과 RGB 기반의 경출 기법을 사용하였다. 실험 결과 Gray World 기법은 타 기법에 비해 높은 성능을 나타냈으며, 색 항등성 기법의 적용을 통해 광원의 영향을 받은 피부색을 색 공간내의 일정한 범위로 복원하는 것이 가능하였다.

• 상하수도학회지
• /
• 제11권2호
• /
• pp.112-127
• /
• 1997

The purpose of this study is to get optimum operating factors of Upflow Anaerobic Sludge Blanket (UASB) reactor by introducing methods that make it to reduce inhibition possible in each process wastewater treatment. The used substrates, concentrated corn starch liquid (CSL) wastewater, modified starch, filtering and decoloring wastewater, ion refining wastewater, and mixed wastewater including modified starch and not including modified starch, are generated from molasses process. The seeding sludge is the digested sludge that had been applied to molasses wastewater. Batch test to reduce the inhibition factors that might be existed in each wastewater was examined. Based on the this test, the optimum operating factors according to alkalinity and pH variation was studied through the continuous test using three 5.5 L UASB reactor. The first reactor added $NaHCO_3$ to control alkalinity. The hydraulic retention time (HRT) reduced to 8 hours and the organic loading rate increased gradually. The second reactor changed the pH of influent from 7.0 to 6.0 using NaOH. The third reactor was operated without changes to compare the above two reactors. As the result, the inhibition in concentrated CSL wastewater was removed by adding iron (II). When trace metals were added to mixed wastewater not including modified starch, the digestability by gas production rate increased to more fifty percentage than mixed wastewater that was not adding the trace metals. The reason that the inhibition did not decreased in spite of adding trace metals and nutrients was influenced by high concentration generated during the acid fermentation. The UASB reactors using the mixed wastewater with the most effective performance were operated as 500 mg/L as $CaCO_3$ alkalinity and 6.0 pH at steady state, and at this time, the gas production rates were 283 and 311mL gas/g $COD_{added}$. The COD removal rates were 84.7 and 86.3%, respectively.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3835-3839
• /
• 2013

A new synthesis route for Pt nanoparticles by direct electrochemical reduction of a solid-state Pt ion precursor ($K_2PtCl_6$) is demonstrated. Solid $K_2PtCl_6$-supported polyethyleneimine (PEI) coatings on the surface of glassy carbon electrode were prepared by simple mixing of solid $K_2PtCl_6$ into a 1.0% PEI solution. The potential cycling or a constant potential in a PBS (pH 7.4) medium were applied to reduce the solid $K_2PtCl_6$ precursor. The reduction of Pt(IV) began at around -0.2 V and the reduction potential was ca. -0.4 V. A steady state current was achieved after 10 potential cycling scans, indicating that continuous formation of Pt nanoparticles by electrochemical reduction occurred for up to 10 cycles. After applying the reduction potential of -0.6 V for 300 s, Pt nanoparticles with diameters ranging from $0.02-0.5{\mu}m$ were observed, with an even distribution over the entire glassy carbon electrode surface. Characteristics of the Pt nanoparticles, including their performance in electrochemical reduction of $H_2O_2$ are examined. A distinct reduction peak observed at about -0.20 V was due to the electrocatalytic reduction of $H_2O_2$ by Pt nanoparticles. From the calibration plot, the linear range for $H_2O_2$ detection was 0.1-2.0 mM and the detection limit for $H_2O_2$ was found to be 0.05 mM.

• 한국전자파학회논문지
• /
• 제20권9호
• /
• pp.853-861
• /
• 2009

X-대역, Ku-대역, K-대역 및 Ka-대역의 신호를 수신할 수 있는 다중 대역 수신기의 구조를 제안하고 이를 구현하기 위해서 요구되는 광대역 및 높은 출력 전력 특성을 갖는 전압 제어 발진기를 설계 제작하였다. 완충단을 갖는 전압 제어 발진기는 정상 상태 조건에서 발진부의 특성이 완충단에 의해 영향을 받지 않도록 발진부의 출력 임피던스와 완충단의 입력 임피던스가 직교 교차하도록 설계하였다. 제작한 전압 제어 발진기는 튜닝 전압 $0.0{\sim}8.0\;V$에서 $14.00{\sim}15.20\;GHz$ 대역폭을 나타내었고, $12{\sim}13\;dBm$ 출력 전력 특성을 나타내어 다중 대역 수신기에서 요구하는 특성을 만족하였다.

• 천문학회보
• /
• 제39권2호
• /
• pp.108.1-108.1
• /
• 2014

Near-infrared Imaging Spectrometer for Star formation history (NISS), one of the main payloads of NEXTSat-1, is being developed by Korea Astronomy & Space Science Institute (KASI). Since NISS adopts an infrared reflecting optical system, its performance is highly sensitive to changes in system temperature. Therefore, it is important to figure out the temperature through thermal analysis and cooling tests in order to optimize the optical system design. We conducted thermal analysis of NISS for the recently updated model, and obtained steady state temperature of the optical system for two cases of satellite attitude: about 190 K for the Normal case and about 210 K for the Hot case. In this paper, we present thermal design of NISS and the preliminary thermal analysis results.