• Journal of Conservation Science
• /
• v.37 no.3
• /
• pp.191-208
• /
• 2021

In this study, the status of damage by subterranean termites and their management according to the region and type of domestic wooden cultural properties were identified. This was based on the survey reports of agencies conducting regular nationwide and regional monitoring of subterranean termites. In addition, using geographical information system (GIS) based on the survey contents, a map was constructed of termite infestation and its progress on 2,805 wooden cultural properties that were surveyed nationwide. Based on the map produced, a total of 486 cases of termite infestation were confirmed in wooden cultural properties during 2018-2019, of which 143 cases (approximately 29.4%) were confirmed to be owing to the invasion of termites in the ground and infestation of wood materials. A web platform and an application using a mapping application program interface were created to increase accessibility to the investigated damage status data. The methods employed by each institution for investigating and monitoring the invasion of termites in the ground included the use of detection dogs, visual observation, installation of wood specimens made of pine, and microwave equipment. However, it was confirmed that monitoring and survey methods were not applied to determine the territorial range of the subterranean termite colonies. Accordingly, the use of dyeing and mark-release-recapture methods were deemed necessary to understand the current status, such as calculating the scope of the target wooden cultural property, when monitoring subterranean termite colonies.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.231-241
• /
• 2022

Objectives: The purpose of this study is to evaluate the input status of exposure-related information in the working environment monitoring database (WEMD) and special health examination database (SHED) for the construction of a national exposure surveillance system. Methods: The industrial and process code input status of WEMD and SHED for 21 carcinogens from 2014 to 2016 was compared. Data from workers who performed both work environment monitoring and special health examinations in 2019 and 2020 were extracted and the actual status of input of industrial and process codes was analyzed. We also investigated the cause of input errors through a focus group interview with 12 data input specialists. Results: As a result of analyzing WMED and SHED for 21 carcinogens, the five-digit industrial code matching rate was low at 53.5% and the process code matching rate was 19% or less. Among the data that simultaneously conducted work environment monitoring and special health examination in 2019 and 2020, the process code matching rate was very low at 18.1% and 5.2%, respectively. The main causes of exposure-related data input errors were the difference between the WEMD and SHED process code input systems from 2020, the number of standard process and job codes being too large, and the inefficiency of the standard code search system. Conclusions: In order to use WEMD and SHED as a national surveillance system, it is necessary to simplify the number of standard code input codes and improve the search system efficiency.

• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.58-65
• /
• 2006

Accurate and efficient monitoring of dynamically changing environments is one of the most important requirements for ubiquitous network environments. Ubiquitous computing provides intelligent environments which are aware of spatial conditions and can provide timely and useful information to users or devices. Also, the growth of embedded systems and wireless communication technology has made it possible for sensor network environments to develop on a large scale and at low-cost. In this paper, we present the design and implementation of a monitoring system that collects, analyzes, and controls the status information of each sensor, following sensor data extracted from each sensor node. The monitoring system adopts Web technology for the implementation of a simple but efficient user interface that allows an operator to visualize any of the processes, elements, or related information in a convenient graphic form.

• Journal of Environmental Science International
• /
• v.29 no.8
• /
• pp.847-855
• /
• 2020

This study presented problems and improvements in the quality control of an air monitoring network, using Gyeongnam as an example. 1) The effective utilization rate of the air monitoring was 95%, which showed good management, but the maximum of 2% was indicated by zero or detection limit among measurement data. 2) In the equivalence evaluation of PM_2.5, the slope and intercept satisfy the evaluation criteria; however, 1% of the PM_2.5/PM₁₀ ratios were outliers. 3) All air monitoring stations meet the quality control standards; however, the management status is added to the quality inspection, management system is unified and the related budget is expanded, and systematic commission management is required.

• Proceedings of the KIEE Conference
• /
• 2001.11c
• /
• pp.268-271
• /
• 2001

This paper presents observer-based on-line overload monitoring scheme for a PMSM(Permanent Magnet Synchronous Motor) drive system. Proposed scheme is to monitor overload status of motor drive system at remote place. The drive system is previously installed on main system and has no communication function. Proposed scheme consists of intelligent sensing head and monitoring part. Intelligent sensing head acquire motor 3-Phase currents and transmit data to monitoring part over serial communication interface. Monitoring part estimates motor speed using state observer. By comparing estimated speed with reference speed, we can detect motor fault. In this scheme observed information must coded and transmitted over a digital communication channel with finite capacity. We consider communication constraint as time delay and we design discrete-time observer. The proposed scheme is tested on the actual drive system.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.13-19
• /
• 2011

In this paper, the active monitoring and control system is developed. This system can monitor the status of high the speed spindle in real time during its processing, and can analyze its influence of dimensional accuracy and processing if any, and can control the machining condition to realize the machining system equipped with active monitoring and self-diagnostic features. Machining experiment was performed on 3 materials Al, Brass and S45C in order to derive the relation between active monitoring and control algorithm by the machining load. In addition, we measured surface roughness of processing specimen along with the data change of spindle rotating speed and conveying speed according to variation of machining load. Based on these experiments, we derived relations for each material that can be applied to the control algorithm to allow self control of the rotating speed and conveying speed according to the machining load.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.2
• /
• pp.69-73
• /
• 2014

In this paper, remote control and surveillance monitoring system of HID street-lamp using low-cost type of Zigbee communication module was developed. A plurality of capacitors with different capacity are attached to magnetic ballast for HID lamps. Changes in the amount of illumination can be adjusted by the changes in capacity so that the electric energy can be reduced. In Zigbee communication module, a ATmega128L microprocessor is used and in main CPU, ARM9 Core is used to construct a low-cost smart system. In surveillance monitoring systems, the system was configured to remote monitoring of presence of error in the lamp abnormalities, the status of leakage current and abnormalities of ballasts and capacitors and the validity of the proposed empirical experiment was confirmed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2004.05b
• /
• pp.1321-1325
• /
• 2004

The continuous monitoring of the runoff in the small-scaled urban watershed and easily accessible experiment catchment is necessary to investigate the overall status of the development in the urban catchment and the varying aspects of the discharge characteristics due to the urbanization. However, the research on the management and the characteristics of the small-scaled model basin for discharge tests has not been actively performed up to now. This study selects the Dong-Eui university basin, which locates at Gaya-dong in Busan, as the experiment catchment to monitor the discharge rate in the urban watershed. EMS(DEMS, DATA-PCS EMS, mini rain gage & AWS(AWS-DEU, DATA-PCS AWS) monitoring system installed for the collection of hydrological data such as the rainfall and the waterlevel. This experiment catchment is the typical urban catchment and is under development, and it is possible to analyze the varying aspects of the discharge rate during and after the development.

• Korean Journal of Child Studies
• /
• v.19 no.1
• /
• pp.43-53
• /
• 1998

This study investigated the relations among maternal cognition, maternal supervisory/monitoring behaviors, and their children's peer competence. The participants were 40 kindergarten children and their mothers. The mothers completed a questionnaire concerning maternal beliefs about children's social skills. Also their supervisory/monitoring behaviors were observed in the context of child-peer interactions. Children's peer competence was measured using a sociometric status measure and a peer acceptance rating scale. Maternal beliefs were related both to the quantity/quality of maternal supervisory/monitoring behaviors and to children's peer competence. Maternal supervisory/monitoring behaviors were also related to children's actual peer competence.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.5
• /
• pp.1385-1392
• /
• 1999

This paper describes the design of the monitoring system for monitoring the current status and indirect controlling of the Wet Station Equipment which is used for cleaning the wafer. Most of the conventional monitoring system depend on the special hardware and software. Basic design goal of monitoring system is provide the convenience for the use and the portability for the system. In order for the system to fulfil its requirements, it was designed using GUI (Graphical User Interface) facility based on the windows NT environment of IBM PC compatible and EtherNet board based on the TCP/IP protocol.