• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.277-285
• /
• 2008

We previously proposed an Orthogonal Code Hopping Multiplexing (OCHM) scheme for statistical multiplexing on a synchronous downlink. OCHM enables a large number of users to share a limited number of code channels through statistical multiplexing. We here improve the performance of OCHM by prioritizing encoded symbols according to their importance using both the conventional code division and the previously proposed code hopping multiplexing schemes. Prioritization is useful for channel coding schemes with different levels of importance for encoded symbols such as turbo-codes. Scheme performance is evaluated by simulation in terms of the required Eb/N0 for a 1% block error rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1899-1906
• /
• 1998

In ATM switching system link bandwidth is one of the improtant resources. Thus ATM switching system must allocate the bandwidth to the users efficiently and guarantee the QoS. Especially to guarantee the QoS of the VBR traffic source such as video, users must declare the traffic characteristics and QoS expectations using UPC parameters. The CAC can use two multiplexig models in variation to link capacity and connection number. One is loseless multiplexing model; the second is a statistical multiplexing model. The loseless multiplexing model performs best when the number of mutiplexed sources is small, but as the number of multiplexed sources is increase the CAC must use the statistical multiplexing model. In this paper, the statistical multiplexing models are studied, which are suitable for high capacity ATM link on VBR traffic sources. The satistical multiplexing model and the loseless multiplexing model are combined. In statistical model we map the UPC parameters provided by new VBR connection to appropriate source traffic model. In the high capacity ATM link, as the connection number increases, the statical multiplexing gain increases.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2836-2849
• /
• 1996

Over ATM network, variable bit rate(or VBR) traffic is allowed. Control of VBR traffic is allowed. Control of VBR traffic becomes difficult if it is bursty. VBR video traffic becomes so much bursty during intra frame period that much cell loss would occur when satistical multiplexed in ATM swich. To aviod cellloss, extra communication resources should be allocated, which reduces the capability of an ATM channel. In this paper, we propose two methods which enable a channel limited in resources to serve more VBR MPEG video bit streams. Firstly, we could redue the bitrate fluction of a statiscally multiplexed bundle of VBR video bit streams by reducing the number of intra frames overlapped at the same frame period. This method can be used in ATM switch which controls multiple video sources. Secondary, in two layer enoding, statistical multiplexing gains can be icreased by letting peak bit rate durations of both layers not be overlapped. This results in more smooth traffic. The performance of proposed methods are demonstrated by a proposed calculation method of statistical multiplexing gains(or SMGs.) The proposed SMG is based on both delay and cell loss QoS requirements at the same time.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.51
• /
• pp.99-108
• /
• 1999

B-ISDN link dimensioning is often known as a difficult problem because of the characteristics of Asynchronous Transfer Mode(ATM) such as various Quality of Services of different service requirements, and the statistical multiplexing resulting from virtual path/virtual circuit connections. In this paper, we propose a nonlinear integer optimization model for dimensioning B-ISDN considering the statistical multiplexing effects of virtual path connections(VPCs) and the modularity of resources allocated to a transmission link. The algorithm based on the simultaneous linear approximation technique as well as some numerical results will be also presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.4
• /
• pp.268-279
• /
• 1986

Recently, the improtance of the ISDN has been emphasized for the new services in the future information society. In this paper, new application of statistical multiplexer which can be used for CCITT D-channel multiplexing is suggested. The basic architecture of statistical multiplexer which can interleave eleven 16Kbps D-channels into one 64Kbps B-channel is also proposed. The necessary buffer size was estimated by computer simulation considering data traffic intensity, signal arrival length distribution and buffer overflow probability. Based on this buffer size, the basic architecture of the statistical multiplexer has been survetyed and hardware design principles are also studied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3A
• /
• pp.223-231
• /
• 2011

It has been shown that the performance of multiple-input multiple-output (MIMO) spatial multiplexing systems is significantly degraded when spatial correlation exists between transmit and receive antenna pairs. In this paper, we investigate designs of a new statistical precoder for spatial multiplexing systems with maximum likelihood (ML) receiver which requires only correlation statistics at the transmitter. Two kinds of closed-form solution precoders based on rotation and power allocation are proposed by means of maximizing the minimum E tlidean distance of joint symbol constellations. In addition, we extend our results to linear receivers for correlated channels. We provide a method which yields the same profits from the proposed precoders based on a simple zero-forcing (ZF) receiver. The simulation shows that 2dB and 8dB gains are achieved for ML and ZF systems with two transmit antennas, respectively, compared to the conventional systems.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.176-178
• /
• 2014

최근 멀티미디어 트래픽의 증가로 인해 효율적인 전송방법이 대두되고 있다. 분할된 인코딩 영상의 Intra frame의 주기와 GOP 사이즈와 같게 하되, Intra frame의 시작시간을 달리하여 영상 bit rate의 fluctuation을 감쇄 및 평탄화 한다. 이를 활용해 같은 대역폭 상황에서 기존의 기술보다 원활한 Conversation Service가 효율적으로 이루어지도록 하는 방법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6A
• /
• pp.386-396
• /
• 2003

Recently, mobile communication systems have supported various services including internet from voice centric service as they evolve toward 3G. To accommodate the increasing number of users, an AAL2 multiplexing scheme is introduced in the UTRAN tub interface for link efficiency. However, limited radio resources and different requirements of various services make it difficult to guarantee the QoS requirements at radio access networks. The conventional AAL2/ATM multiplexing systems focused on the multiplexing efficiency of voice anddata services and QoS issues of real time and non real time services. In this paper, we classfy various services according to QoS requirements and propose AAL2/ATM multiplexing schemes using statistical multiplexing and scheduling with a rather simple structure to guarantee the given requirements. Simulation results show that the proposed schemes perform better than the conventional schemes to guarantee QoS requirements of various services.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7A
• /
• pp.578-586
• /
• 2005

We propose a random frequency hopping orthogonal frequency division multiple access (RFH-OFDMA) system based on statistical multiplexing for improving downlink user capacity. User capacity is defined as the maximum number of users served with a given basic data-rate in a cell. We compare the downlink user capacity of the proposed RFH-OFDMA system with that of the conventional frequency hopping OFDMA (FH-OFDMA) systems in the worst case where all users are located at the cell boundary. User capacity is limited by either the number of subcarriers or other-cell interference (OCI). Simulation results show that the proposed RFH-OFDMA system can accommodate 262 users in a 3-sectored cell, while the conventional FH-OFDMA systems can accommodate 51 users, when the user channel activity and the required Eb/I0 are 0.1 and 6 dB, respectively, and all users are assumed to be located at the cell boundary.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2534-2542
• /
• 2011

In this paper, we show that performance can be improved by using multiple antennas in the conventional orthogonal code hopping multiplexing (OCHM) scheme, which was proposed for accommodating a larger number of users with low channel activities than the number of orthogonal codewords used in code division multiple access (CDMA)-based communication systems through downlink statistical multiplexing. First, we introduce two different types of OCHM systems together with orthogonal codeword allocation strategies, and then derive their mathematical expression for log-likelihood ratio (LLR) values according to the two different schemes. Next, when a turbo encoder based on the LLR computation is used, we evaluate performance on the frame error rate (FER) for the aformentioned OCHM system. For comparison, we also show performance for the existing symbol mapping method using multiple antennas, which was used in 3GPP standards. As a result, it is shown that our OCHM system with multiple antennas based on the proposed orthogonal codeword allocation strategy leads to performance gain over the conventional system---energy required to satisfy a target FER is significantly reduced.