• 대한음성학회지:말소리
• /
• 제50호
• /
• pp.51-69
• /
• 2004

In this paper, we present a one-pass semi-dynamic network decoding framework that inherits both advantages of fast decoding speed from static network decoders and memory efficiency from dynamic network decoders. Our method is based on the novel language model network representation that is essentially of finite state machine (FSM). The static network derived from the language model network [1][2] is partitioned into smaller subnetworks which are static by nature or self-structured. The whole network is dynamically managed so that those subnetworks required for decoding are cached in memory. The network is near-minimized by applying the tail-sharing algorithm. Our decoder is evaluated on the 25k-word Korean broadcast news transcription task. In case of the search network itself, the network is reduced by 73.4% from the tail-sharing algorithm. Compared with the equivalent static network decoder, the semi-dynamic network decoder has increased at most 6% in decoding time while it can be flexibly adapted to the various memory configurations, giving the minimal usage of 37.6% of the complete network size.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1316-1321
• /
• 2003

The systematic method to construct equivalent static load from the given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. They may results in unreliable structural design. The present study proposes a selection scheme of degrees of freedom(d.o.f) for imposing the equivalent static loads. The d.o.fs are selected by Two-level condensation scheme(TLCS). TLCS consists of two two-steps. The first step is the energy estimation in element-level and the second step consists of the traditional sequential elimination precudure. Through several numerical examples, the efficiency and reliability of proposed scheme is verified.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.1003-1007
• /
• 1998

In recent years inverter power sources are more and more used for resistance welding processes. In this paper some results of investigation into the static and dynamic behavior of high-current rectifier diodes used in these inverter power sources will be discussed. By means of digital simulation, losses and efficiency have been determined depending on the power semiconductor parameters.

• 한국전산구조공학회논문집
• /
• 제20권1호
• /
• pp.57-63
• /
• 2007

본 연구는 동하중의 영향을 받는 구조물의 효율적인 구조 해석 및 최적화 수행을 위해 임계 시간의 동하중을 등가 정하중으로 변환하는 방법을 제안한다. 동하중을 등가 정하중으로 변환하기 위해서는 적절한 자유도 선정이 중요하다. 그러나, 기존 방법에서는 자유도의 선정이 임의로 이루어져서 몇 개의 자유도에 과도한 정하중이 부과되거나, 구조물의 거동에 영향력이 없는 자유도들이 선정됨으로써 신뢰성이 떨어지는 결과를 제공하기도 한다. 본 연구에서는 2단계 축소기법과의 연동을 통해 중요 자유도를 선정하고, 선정된 자유도에 등가 정하중을 부과하는 방법을 제안하다. 주자유도는 구조물의 거동에 지배적인 영향력을 갖고 있으며, 손상 탐지나 시스템 검증에서도 중요한 의미를 갖는 자유도이다. 수치예제를 통해 선정된 자유도에 등가 정하중을 분포시킨 후 동하중하의 시간 응답과 비교하여 그 신뢰성을 확인한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.551-554
• /
• 2001

A necessity of remote control robots or various searching robots etc. that accomplish works given instead of human under long distance and extreme environment such as volcano, universe, deep-sea exploration and nuclear power plant etc. is increasing, and so the development and the research regarding these mobile robots are actively progressing. The wheel mobile robot or the track mobile robot have a sufficient energy efficiency under this en, but also have a lot of limits to accomplish works given which are caused from the restriction of mobile ability. Therefore, recently many researches for the walking robot with superior mobility and energy efficiency on the terrain, which is uneven or where obstacles, inclination and stairways exist, have been doing. The research for these walking robots is separated into fields of mechanism and control system, gait research, circumference environment and system condition recognition etc. greatly. It is a research field that the gait research among these is the centralist in actual implementation of walking robot unlike different mobile robots. A research field for gait of walking robot is classified into two parts according to the nature of the stability and the walking speed, static gait or dynamic gait. While the speed of a static gait is lower than that of a dynamic gait, a static gait which moves the robot to maintain a static stability guarantees a superior stability relatively. A dynamic gait, which make the robot walk controlling the instability caused by the gravity during the two leg supporting period and so maintaining the stability of the robot body spontaneously, is suitable for high speed walking but has a relatively low stability and a difficulty in implementation compared with a static gait. The quadruped walking robot has a strong point that can embody these gaits together. In this research, we will develope an autonomous quadruped robot with an asaptibility to the environment by selectry appropriate gait, element such as duty factor, stride, trajectory, etc.

• 한국콘텐츠학회논문지
• /
• 제8권5호
• /
• pp.192-206
• /
• 2008

우리나라의 생명보험산업은 IMF 사태와 방카슈랑스의 도입 등 많은 변화를 겪어왔으며 앞으로 시행될 자본통합법의 시행도 추후에는 생명보험산업에 많은 영향을 미칠 것으로 보이며 생명보험회사의 경쟁력 강화를 위해서는 효율성의 분석이 필수적이다. 본 논문은 DEA 모형을 이용하여 우리나라에서 영업 중인 생명보험회사들의 효율성을 분석했다. 이를 위해 투입변수는 두 가지 범주로 나누어서 분석을 시도하였고 동태적 효율성을 분석하기 위해서 DEA/WINDOW 모형을 도입하였다. 이를 통하여 생명보험회사들의 CCR, BCC, 규모효율성을 알 수 있었고 7년간(1998년$\sim$2004년)의 효율성의 추세와 안정성을 파악할 수 있었다.

• Earthquakes and Structures
• /
• 제1권2호
• /
• pp.177-195
• /
• 2010

This paper presents an appraisal of four nonlinear static procedures (CSM, N2, MPA and ACSM) employed in seismic assessment of plan-irregular buildings. It uses a three storey reinforced concrete plan-irregular frame building exemplifying typical older constructions of the Mediterranean region in the early 1970s that was tested in full-scale under bi-directional pseudo-dynamic loading condition at JRC, Ispra. The adequacy and efficiency of the simplified analytical modelling assumptions adopted were verified. In addition, the appropriate variants of code-prescribed NSPs (CSM and N2) to be considered for subsequent evaluation were established. Subsequent parametric studies revealed that all such NSPs predicted reasonably well both global and local responses, having the benchmark values been determined through nonlinear dynamic analyses using a suit of seven ground motions applied with four different orientations. The ACSM, however, predicted responses that matched slightly better the median dynamic results.

• 한국안전학회지
• /
• 제20권2호
• /
• pp.119-126
• /
• 2005

Load bearing structural members in a wide variety of applications accumulate damage over their service life. From a standpoint of both safety and performance, it is desirable to monitor the occurrence, location, and extent of such damage. Structures require complicated element models with a number of degrees of freedom in structural analysis. During experiment much effort and cost is needed for measuring structural parameters. The sparseness and errors of measured data have to be considered during the parameter estimation Of Structures. In this paper we introduces damage identification algorithm by a system identification(S.I) using static and dynamic response. To study the behaviour of the estimators in noisy environment Using Monte Carlo simulation and a data measured perturbation scheme is adopted to investigate the influence of measurement errors on identification results. The assessment result by static and dynamic response were compared, and the efficiency and applicabilities of the proposed algorithm are demonstrated through simulated static and dynamic responses of a truss bridge. The assessment results by each method were compared and we could observe that the 5.1 method is superior to the other conventional methods.

• 설비공학논문집
• /
• 제22권2호
• /
• pp.70-77
• /
• 2010

In order to improve the efficiency of a main transformer in a train, the optimal operation of a cooling system is necessary. For the development of optimal control algorithms of a cooling system, mathematical models of a main transformer cooling system were developed. These include static and dynamic models of a main transformer, an oil pump, an oil cooler, and a blower. Static models were used to find optimal oil temperatures of the inlet and the outlet of a transformer. Dynamic models were used to predict transient performances of control algorithms of a blower and an oil pump. Simulation results showed good predictions of the static and the dynamic behavior of a main transformer cooling system. Therefore, mathematical models developed in this study may be effectively used for the development of control algorithms of a main transformer cooling system.

• 품질경영학회지
• /
• 제38권3호
• /
• pp.393-407
• /
• 2010

The purpose of this study is to analysis relative efficiency and efficiency in process of time. Thus we use panel data of 34 local public medical centers between 2003 and 2005 to use DEA and Malmquist analysis. The result of our this study is as flow; first, The results of static efficiency of 34 local public medical centers show 10 CCR model and 23 BCC model which is difference of efficiency by economic of scale. Second, a cause of increased efficiency is not only change of technology but also change of efficiency to management system index show between 2003 and 2005 by Malmquist analysis and contracting-out is higher than direct management between 2004 and 2005. That means efficiency of local public medical centers is their own effort and innovation not government subsidies.