• 한국유체기계학회 논문집
• /
• 제10권6호
• /
• pp.7-16
• /
• 2007

An axial-type fan which operates at the relative total pressure of 671Pa and static pressure of 560Pa with the flow rate of $416.6m^3/min$ is developed with an optimization technique based on the gradient method. Prior to the optimization of fan blade, a three-dimensional axial-type fan blade is designed based on the free-vortex method along the radial direction. Twelve design variables are applied to the optimization of the rotor blade, and one design variable is selected for optimizing a stator which is located behind of the rotor and is used to support a fan driving motor. The total and static pressure are applied to the restriction condition with the operating flowrate on the design point, and the efficiency is chosen as the response variable to be maximized. Through these procedures, an initial axial-fan blade designed by the free vortex method is modified to increase the efficiency with the satisfaction of the operating condition. The optimized fan is tested to compare the aerodynamic performance with an imported same class fan. The test result shows that the optimized fan operates with the satisfaction of restriction conditions, but the imported fan cannot. From the experimental and numerical test, they show that this optimization method improves the fan efficiency and operating pressures of a fan designed by the classical fan design method.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.102-110
• /
• 2022

This paper proposes a solution to the problems of manufacturing cost and processability by applying discrete material and thickness optimization (DMTO) and minimizing the use of high-strength, lightweight materials in the optimization process. A simple infant pop-up seat model was selected as the application target, and the weight reduction effect and variation in strength according to the optimization results were observed. In this study, a simplified finite element model of an infant pop-up seat frame was first constructed. The model was used to perform a static structural analysis to verify the weight and strength of each part. The D-optimal design of the experimental method was then used to observe the influence of each part on the weight and strength. This process was applied using discrete thickness optimization (DTO) (which applies high-strength, lightweight materials and optimizes only the thickness) and DMTO (which considers both the material and thickness). The DTO and DMTO results were compared to verify the design method that determines the major parts and simultaneously considers the material and thickness. Accordingly, in this study, an optimal lightweight design that satisfied the strength standards of the seat frame was derived. Furthermore, discretization parameters were used to minimize the application of high-strength, lightweight materials.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1333-1354
• /
• 2015

A higher order analytical solution for static analysis of a truncated conical composite sandwich panel subjected to different loading conditions was presented in this paper which was based on a new improved higher order sandwich panel theory. Bending analysis of sandwich structures with flexible cores subjected to concentrated load, uniform distributed load on a patch, harmonic and uniform distributed loads on the top and/or bottom face sheet of the sandwich structure was also investigated. For the first time, bending analysis of truncated conical composite sandwich panels with flexible cores was performed. The governing equations were derived by principle of minimum potential energy. The first order shear deformation theory was used for the composite face sheets and for the core while assuming a polynomial description of the displacement fields. Also, the in-plane hoop stresses of the core were considered. In order to assure accuracy of the present formulations, convergence of the results was examined. Effects of types of boundary conditions, types of applied loads, conical angles and fiber angles on bending analysis of truncated conical composite sandwich panels were studied. As, there is no research on higher order bending analysis of conical sandwich panels with flexible cores, the results were validated by ABAQUS FE code. The present approach can be linked with the standard optimization programs and it can be used in the iteration process of the structural optimization. The proposed approach facilitates investigation of the effect of physical and geometrical parameters on the bending response of sandwich composite structures.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.82-89
• /
• 2001

본 논문은, HVDC 시스템의 인버터 제어기 및 고조파 필터의 설계를 위하여 동특성 및 정상상태 특성을 해석하는 방법을 제시한다. EMTP 시뮬레이션을 이용하면, 동특성 분석이 가능하며, 정상상태 특성의 분석은필터와 부하를 고려한 조류해석을 수행함으로써 가능하다. 또한 본 논문은 HVOC 시스템의 정적 및 동적 특성 분석이 가능한 단상 등가회로를 제안한다. 이 단상 등가회로에서 인버터는 스위치의 소호에 따른 전류원으로 취급된다. 또한 필터설계에 사용되고 있는 각종 목적함수를 단상 등가회로룹 이용하여 구할 수 있다, 본 논문은 전압의 고조파 성분 및 필터의 전력손실을 고려한 목적함수를 이용하여 펄터를 최적화하는 과정이 제시되어 있다.

• 한국강구조학회 논문집
• /
• 제15권6호통권67호
• /
• pp.603-610
• /
• 2003

본 논문에서는 공액보이론을 이용한 교량의 손상추정 기법을 제시하였다. 정적처짐과 강성과의 관계식으로부터 최적화기법을 도입하여 손상 위치 및 정도을 추정하였다. 제안된 기법의 타당성 검정을 위하여 수치모형을 통한 손상도 추정을 수행하였으며, 일반적으로 손상추 정결과의 정확도를 감소시키는 노이즈의 영향을 분석하기 위하여 정적응답자료에 백색잡음을 추가하여 손상도 평가를 수행하였다. 또한, 개발된 기법의 현장적용성을 검토하기 위하여 실내실험을 실시하고, 실험데이터를 이용하여 손상도 추정을 수행하였다 또한, 손상의 정도 및 손상 폭이 손상 추정결과에 미치는 영향을 검토하기 위하여 다양한 손상 폭을 갖는 경우에 대하여 손상을 추정하였으며, 이들 결과를 바탕으로 제시된 기법의 적용성과 한계에 대하여 기술하였다

• 한국정밀공학회지
• /
• 제32권11호
• /
• pp.997-1005
• /
• 2015

In this study, modal analysis and equivalent static load analysis for valve supports of 26" gas piping in gas stations were conducted and the existing straight and inclined types of valve supports were compared using seismic performance testing. Also, a new valve support shape was suggested by optimizing position of fastener holes, width and thickness of the support, and size of bracket. Improvement in seismic performance by design optimization was verified through equivalent static load analysis. The seismic performance of the newly proposed valve support was greatly improved and the maximum displacement and maximum stress of the seismic load was about 20% lower than those of the existing valve support.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.103-111
• /
• 2008

This study proposes a technique to estimate the material property of a paper by using an experimental methods and commercial CAE software. Under gravitation, if one side of the paper is attached to the ground, the opposite side of paper is largely deformed, and vibrates freely. Since the paper has an orthotropic characteristic due to its treatment, the deformations in two orthogonal directions of the dry paper are different. An experimental method to measure the static deformation of the paper introduces this phenomenon. And dynamic behavior, frequency of free vibration is measured. And then. virtual prototypes that can represent the static and dynamic behavior are modeled by using the commercial CAE software $RecurDyn^{MT}$/MTT3D, which has been widely used by the printer makers. While comparing the deformation and frequency from the experiment and simulation, a design optimization technique in the commercial CAE software of R-INOPL, $RecurDyn^{TM}$/AutoDesign is used to estimate the material property such as Young's modulus, shear modulus and density of the paper.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.601-603
• /
• 2002

This paper describes the design optimization of a 8:6 Switched Reluctance Motor(SRM) with the rotor pole inserted barrier. The design is focussed on the minimization of the static torque ripple as maintaining the average torque and the efficiency of the demanded value. The finite element analysis method (FEM) and the optimization algorithm are used to optimize the shape of the rotor pole. By comparing the FEM results of barrier type SRM with these of prototype, it is verified that the barrier type SRM improves the static torque characteristics.

• Journal of applied mathematics & informatics
• /
• 제30권3_4호
• /
• pp.413-428
• /
• 2012

Every contingent claim is unable to be replicated in the incomplete markets. Shortfall risk is considered with some risk exposure. We show how the dynamic optimization problem with the capital constraint can be reduced to the problem to find an optimal modified claim $\tilde{\psi}H$ where$\tilde{\psi}H$ is a randomized test in the static problem. Convex and coherent risk measures defined in the Orlicz hearts spaces, $M^{\Phi}$, are used as risk measure. It can be shown that we have the same results as in [21, 22] even though convex and coherent risk measures defined in the Orlicz hearts spaces, $M^{\Phi}$, are used. In this paper, we use Fenchel duality Theorem in the literature to deduce necessary and sufficient optimality conditions for the static optimization problem using convex duality methods.

• 제어로봇시스템학회논문지
• /
• 제13권11호
• /
• pp.1048-1052
• /
• 2007

This paper presents a rank-constrained linear matrix inequality(LMI) approach to simultaneous linear-quadratic(LQ) optimal control by static output feedback. Simultaneous LQ optimal control is formulated as an LMI optimization problem with a nonconvex rank condition. An iterative penalty method recently developed is applied to solve this rank-constrained LMI optimization problem. Numerical experiments are performed to illustrate the proposed method, and the results are compared with those of previous work.