• 한국염색가공학회지
• /
• 제11권2호
• /
• pp.75-85
• /
• 1999

불량도체 표면의 대전현상 즉 정전기(static electricity) 현상은 인류의 일상생활에 도움을 주기도 하고 피해를 주기도 하지만 주로 해로움이 많다. 따라서 뼈대의 물리적 기능이 탁월한 불량도체의 표면에 전도성을 부여해 주면 생활에 편리함을 줄 수 있을 뿐만 아니라 유익한 여러 가지 첨단기술 제품도 생산해 낼 수 있다. 유리, 종이, 섬유, 플라스틱과 같이 원래 전기가 잘 통하지 않는 불량도체의 표면에 전도성을 부여하려는 가공법이 다양하게 시도되고 있다. 절연체에 전도성을 부여하는 기술은 복합(composite)화에 의한 전자기능의 출현을 목표로 한 기술인데 다음 2가지 형태로 분류할 수 있다.(중략)

• 한국안전학회지
• /
• 제8권4호
• /
• pp.223-230
• /
• 1993

각종 산업에 있어서 분체는 여러가지 형태로 다량 사용되고 있으며 분체 취급시 정전기에 의한 폭발, 화재 등 많은 재해가 발생되고 있다. 분진폭발은 과거에 탄광에서 탄진폭발에 의한 것이 대부분 이었지만 최근 플라스틱 공업, 유기합성 공업, 분말 공업 등 원재료와 제품을 분체로 취급하는 공정이 증가하면서 분진폭발 사고가 현저히 증가하였다. 그러나 현재 이러한 재해 방지를 위한 충분한 검토 및 대책이 잘 이루어지지 않고 있는 실정이다.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.319-324
• /
• 2014

The wafer carrier is made of PP, PC, PE resin which have excellent heat and chemical resistance and electrical properties. However, particle generation has become a problem due to static electricity generated in the carrier. Some conductive material such as carbon black (CB) and carbon fiber (CF) are added for the purpose of anti-static, however, additional for motility and particle contamination problems due to high carbon content occurs. In this paper, the electrical characteristics and workability are observed and compared by adding low Carbon Nono Tube(CNT) to each PP, PC and PE resin to solve the problem.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.367-372
• /
• 2005

This study primarily is concerned with a new device which has been developed following the international standards to measure the ventilation performance at elevated temperature. This device can measure duration of ventilation, performance of electricity, static pressure at elevated temperature and also it is having provision to measure reversible performances during fire hazards. Invented device is closed circuit type system which is best suited for korean industrial environment with low cost and high efficiency. International standards has been compared and performance testing has been major using BS 7346 which is tested by Warrington Fire Research Centre.

• 패션비즈니스
• /
• 제9권5호
• /
• pp.122-135
• /
• 2005

It has been reported that natural dyeing is impossible without pre-treatment with metal mordanting agents. However, pre-treatment with chitosan, which has high affinity to natural dyes, could result in an excellent dyeing with various natural dyes. In this study, three treatment methods were employed; 1) Using PET without any pre-treatment (Method 1) 2) Using PET with chitosan acid solution pre-treatment (Method 2) 3) Using PET with chitosan pre-treatment and subsequent crosslinking using citric acid (Method 3) Method 2 and 3 enhanced the Cochineal dyeability remarkably compared to Mehod 1. Washfastness was also enhanced, and moisture content, static property, abrasion resistance, and fabric hand changes were investigated.

• International Journal of Computer Science & Network Security
• /
• 제22권6호
• /
• pp.172-180
• /
• 2022

Crypto-mining malware (known as crypto-jacking) is a novel cyber-attack that exploits the victim's computing resources such as CPU and GPU to generate illegal cryptocurrency. The attacker get benefit from crypto-jacking by using someone else's mining hardware and their electricity power. This research focused on the possibility of detecting the potential crypto-mining malware in an environment by analyzing both static and dynamic approaches of deep learning. The Program Executable (PE) files were utilized with deep learning methods which are Long Short-Term Memory (LSTM). The finding revealed that LTSM outperformed both SVM and RF in static and dynamic approaches with percentage of 98% and 96%, respectively. Future studies will focus on detecting the malware using larger dataset to have more accurate and realistic results.

• 한국의류학회지
• /
• 제33권11호
• /
• pp.1696-1706
• /
• 2009

Nonwoven fabrics have been widely used in various fields that include household, industrial, agricultural, medical goods, especially in the automobile industry. In this study, eco-friendly fiber materials were developed and investigated as a substitute material for polyester fibers in nonwovens. To make plant fiber bundles, stems of Indian mallow (IM), and Kuzu vine (KV) were retted; in addition, the non-cellulose component was partially removed. Plant fiber bundles and polyester fibers (P) were blended and needle punched to produce nonwovens. Five kinds of nonwovens were manufactured: P100 (Polyester 100%), IM10 (IM 10% and Polyester 90%), IM20 (IM 20% and Polyester 80%), KV10 (KV 10% and Polyester 90%), and KV20 (KV 20% and Polyester 80%). The color values, surface appearance, tensile strength, elongation, tear strength, abrasion strength, flexstiffness, moisture regain, water or oil absorbency, and static electricity of manufactured nonwovens are investigated. As the blended ratios of IM or KV increased, the brightness of nonwovens decreased compared to that of polyester 100%. Tensile strength, tear strength, abrasion strength, and flexstiffness of IM10 as well as KV10 were higher than those of P100, IM20, and KV20, resulting from the influence of the structure and properties of nonwoven fibers. Moisture regain and water or oil absorbency increased, while static electricity decreased in proportion to the amount of plant fibers. IM or KV and polyester blended nonwovens showed improved properties over P100 that could be substituted for P100 as a novel material for textiles.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.9-15
• /
• 2024

Hydrogen-based electricity and transportation systems are widely recognized as sustainable power sources. However, the low ignition energy of hydrogen, only 1/10th that of conventional fossil fuels, poses a safety concern involving the risk of ignition due to electrostatic discharge from facility workers. Therefore, anti-static systems are imperative for hydrogen-based electricity facilities. To address this, we propose a reliable conductive rubber mat (CRM) to ensure the safety of these facilities. Unlike conventional anti-static floors that utilize conductive paint (CP), the CRM features a uniform distribution of conductive components in chemically and mechanically stable rubber. As a result, the CRM is unyielding to polar solvents (such as ethanol and hydrosulfuric acid) and non-polar solvents (like mineral oil) without increasing its resistance. Moreover, the CRM can withstand mechanical stress. Consequently, the human-body voltage of workers on the CRM would be sufficiently low enough to protect them from hydrogen explosions, thereby enhancing overall safety.

• 조명전기설비학회논문지
• /
• 제23권1호
• /
• pp.141-149
• /
• 2009

본 논문에서는 준정적 FDTD 기법을 FORTRAN 프로그래밍을 통해 직접 구현하고 이를 이용해 중간주파수 대역의 인체유도전류 분포를 해석하였다. 제작된 프로그램의 타당성을 검증하기 위하여 기존 FDTD 기법을 적용하기 어려운 테스트 모델에 대한 계산결과를 이론적 해와 비교하고, 타임스텝이 크게($5.68{\times}10^6$배) 단축되는 것을 확인하였다. 검증된 수치해석 기법을 이용하여 20[kHz] 자기장과 1[MHz] 전기장에 노출된 3차원 고해상도 인체모델에 유기되는 유도전류의 분포를 계산하고, 양 발의 접지조건이 유도전류의 분포와 크기에 미치는 영향을 분석하였다. 본 연구는 인체유도전류의 안전성 평가, 생체전기 응용 진단장치 개발 등을 포함한 다양한 분야에서 활용될 것으로 기대된다.

• Design & Manufacturing
• /
• 제7권1호
• /
• pp.55-59
• /
• 2013

A Light Emitting Diode(LED) is a semiconductor device which converts electricity into light. LEDs are widely used in a field of illumination, LCD(Liquid Crystal Display) backlight, mobile signals because they have several merits, such as low power consumption, long lifetime, high brightness, fast response, environment friendly. In general, LEDs production does die bonding and wire bonding on board, and do silicon and phosphor dispensing to protect LED chip and improve brightness. Then lens molding process is performed using mixed liquid silicon rubber(LSR) by resin and hardener. A mixture of resin and hardener affect the optical characteristics of the LED lens. In this paper, computational design of static mixer was performed for mixing of liquid silicon. To evaluate characteristic of mixing efficiency, finite element model of static mixer was generated, and fluidic analysis was performed according to length of mixing element. Finally, optimal condition of length of mixing element was applied to static mixer from result of fluidic analysis.