• 제목/요약/키워드: Static Load Test

검색결과 995건 처리시간 0.034초

비행하중조건에서 연료 파일런의 구조 건전성 검증을 위한 구조 정적시험 (Structural Static Test for Validation of Structural Integrity of Fuel Pylon under Flight Load Conditions)

  • 김현기;김성찬;최현경;홍승호;김상혁
    • 항공우주시스템공학회지
    • /
    • 제16권1호
    • /
    • pp.97-103
    • /
    • 2022
  • 항공기에 장착되는 구성품은 항공기 운용 조건에서 구조 건전성이 입증되어야만 항공기에 장착될 수 있다. 항공기 주요 구성품 중에서 파일런은 엔진이나 외부무장 같은 외부장착물을 항공기의 주날개와 연결하고 파일런 자체에 작용하는 하중을 항공기의 주구조물로 전달하는 역할을 하며, 민간 항공기에서는 엔진 영역에서 화재가 발생할 경우 주날개로 화재가 번지는 것을 방지하는 역할도 한다. 본 연구에서는 항공기에 외부 연료탱크를 장착하기 위해 사용하는 연료 파일런의 구조 건전성을 검증하기 위해 수행한 구조 정적시험의 결과를 제시하였다. 본문에서는 파일런의 구조 정적시험에 사용되는 시험장비, 유압장치, 하중제어시스템 그리고 데이터 획득장비로 구성되는 시험셋업을 제시하였다. 그리고, 하중작동기를 제어하는 소프트웨어를 소개하고, 각 시험하중 조건에 대한 시험 프로파일을 제공하였다. 시험 결과, 각 시험에서 허용 오차 범위 내에서 하중작동기가 적절히 제어되는 것으로 나타났으며, 시험체의 주요 위치에서 수치해석과 구조시험으로 부터 획득한 변형률의 비교를 통해 수치해석의 신뢰성을 검증하였다. 결론적으로, 구조 정적시험을 통해 본 연구에서 다루고 있는 연료 파일런이 요구된 하중조건에 대해 충분한 구조 강도를 가지고 있음을 입증하였다.

송전용 고분자 애자의 정적 및 동적인 상태에서 장기 기계적 특성 연구 (A Study on the Long-term Mechanical Properties Under Static and Cyclic State of Composite Insulators for Transmission Lines)

  • 김수연;김영성;홍진영;박완기
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
    • /
    • pp.869-871
    • /
    • 1998
  • The extensive use of composite insulators for transmission lines can ultimately be justified only on long-term qualification tests. The actual load working on the insulator in the field is not static load but cyclic load. So in this paper, we discussed an examination of aging degradation by mechanical performance of composite insulators under static tension load and cyclic tension load. and also described useful approaches for analyzing their long term performance so as to develop reliable composite insulators. The static and cyclic tension load-time test data were examined by Weibull distribution for their capability of presuming long term performance. It was found that cyclic tension loads were more severe than static tension loads. The results also indicate that it may be relevant for an user to select composite insulators on basis of their performance under cyclic tension loads than static tension loads.

  • PDF

외부장착물 분리하중에 대한 파일런 구조 정적시험 (Structural Static Test of Pylon for External Attachment Separation Load)

  • 김현기;김성찬;홍승호;최현경;조상환;박형배
    • 항공우주시스템공학회지
    • /
    • 제16권1호
    • /
    • pp.104-109
    • /
    • 2022
  • 파일런 내부에 장착되는 외부장착물 분리장치(BRU)는 외부연료탱크나 외부무장 등의 외부장착물을 고정하는 역할을 하며, 비상시에는 외부장착물을 분리하는 역할을 한다. 특히, 외부장착물을 분리시킬 때 BRU에 의해 발생하는 하중을 펀칭하중이라고 한다. 본 연구에서는 파일런에 작용하는 BRU 펀칭하중 조건에서 파일런의 구조 건전성을 검증하기 위해 수행한 구조 정적시험 결과를 제시하였다. 구조 정적시험에서 외부장착물의 분리하중에 대한 구현방식과 BRU 펀칭하중 조건에 대한 시험 프로파일을 제시하였고, 각 시험에서 하중제어의 적절성을 판단하기 위해 하중 입력신호와 출력신호 사이의 오차를 비교하였다. 그리고, 파일런의 주요 위치에서 수치해석 결과와 시험에서 계측된 변형률을 비교하였다. 시험 결과, 시험수행 간에 시험하중이 잘 제어되었고, 수치해석이 시험결과를 잘 예측한 것으로 파악되었다. 최종적으로, 설계 제한하중과 설계 극한하중에 의해 수행된 구조 정적시험을 통해 본 연구에서 다루고 있는 항공기용 파일런은 외부장착물 분리하중에 대해 충분한 구조 강도를 보유하고 있음을 검증하였다.

냉각 유량이 가스 포일 스러스트 베어링의 성능에 미치는 영향 (Effects of Cooling Flow Rate on Gas Foil Thrust Bearing Performance)

  • 황성호;김대연;김태호
    • Tribology and Lubricants
    • /
    • 제39권2호
    • /
    • pp.76-80
    • /
    • 2023
  • This paper describes an experimental investigation of the effect of cooling flow rate on gas foil thrust bearing (GFTB) performance. In a newly developed GFTB test rig, a non-contact type pneumatic cylinder provides static loads to the test GFTB and a high-speed motor rotates a thrust runner up to the maximum speed of 80 krpm. Force sensor, torque arm connected to another force sensor, and thermocouples measures the applied static load, drag torque, and bearing temperature, respectively, for cooling flow rates of 0, 25, and 50 LPM at static loads of 50, 100, and 150 N. The test GFTB with the outer radius of 31.5 mm has six top foils supported on bump foil structures. During the series of tests, the transient responses of the bearing drag torque and bearing temperature are recorded until the bearing temperature converges with time for each cooling flow rate and static load. The test data show that the converged temperature decreases with increasing cooling flow rate and increases with increasing static load. The drag torque and friction coefficient decrease with increasing cooling flow rate, which may be attributed to the decrease in viscosity and lubricant (air) temperature. These test results suggest that an increase in cooling flow rate improves GFTB performance.

대구경 해상 강관말뚝의 설계지지력 확인을 위한 여러 가지 재하시험의 적용 (Case Studies of Several Load Tests for Large Diameter Battered Steel Pipe Piles Constructed on the Offshore Area.)

  • 이정학;서덕동;정헌주
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.291-298
    • /
    • 2001
  • It is very difficult to accomplish load tests of piles with large diameter constructed on the offshore area, because of requirement for large scaled loading equipment and bad testing conditions. Therefore, so far in many cases pile driving dynamic formulas have applied to quality control, and recently dynamic load test method is widely used for confirming bearing capacities of such piles. However, in cases of piles with very large diameter about 2,500mm, it is nearly impossible for regular type load test methods of piles such as static and dynamic to apply owing to very large design load. This is case studies of load tests such as modified static and dynamic load tests of piles and point load tests of rock samples for estimating rational allowable bearing capacity of very large diameter piles constructed on the marine area.

  • PDF

신형식 CFTA 거더 교량의 구조성능평가 (Structural Performance Analysis of New Type CFTA Girder Bridge)

  • 이지오;정민철;박경훈;공정식
    • 한국방재학회 논문집
    • /
    • 제11권1호
    • /
    • pp.15-22
    • /
    • 2011
  • 본 논문에서는 아치 형상을 갖는 강재 거더에 콘크리트가 충진되고 외부에 긴장력을 도입하여 구조적 효율성을 높인 CFTA 거더(Concrete-Filled and Tied Steel Tubular Arch Girder)의 아치효과와 구조적 성능을 검증하기 위해 정적하중재하실험을 수행하였고, 실험결과의 타당성을 검증하기 위해 유한요소해석을 수행하였다. CFTA 거더는 강재, 콘크리트, PS강재 등을 이용하여 각 재료의 역학적 장점을 최대한 발휘하도록 형상화하였다. 본 연구에서는 프레임해석프로그램으로 지간장 12m인 축소모형을 설계하였으며, 해석결과에 근거하여 정적재하실험이 수행되었다. 정적재하실험 결과, CFTA 거더의 구조적 성능과 안전성이 검증되었으며, 아치 효과에 의해 타 구조형식과는 다른 처짐 형상이 나타났다. 또한 ABAQUS 프로그램을 이용한 유한요소해석을 통해 차량 충돌 안정성과 정적재하실험결과의 타당성을 입증하였다.

풍화 화연토와 loess의 붕괴특성 비교 (The Comparison of Collapsible Characteristics on Decomposed Granite Soil and Loess)

  • 도덕현
    • 한국지반공학회지:지반
    • /
    • 제2권1호
    • /
    • pp.7-14
    • /
    • 1986
  • The structure of the collapsible soils, such as decomposed granite soil and loess, were examined by the odeometer test, SEM & XES analysis and static & cyclic triaxial test, and hove this structure have influences upon the collapsible behaviour under static and cyclic load was investigated. The study results obtained are as follows; 1. The macropores space of decomposed granite soil (rd=1.50g/cm3) and loess (rd=1.43g/cm3) used in this test were well developed, and showed the behaviour of collapsible soil. 2. Collapsible soil has high resistance on the strain under natural moisture content, however, the resistance on the strain was sharply decreased by the absorption and increasing load since its special structure was destructed. 3. Under the static load, the strain of collapsible soil was high by the viscous flow of the cyclic bonds with time lapse, but Infer the cyclic load, the strain of collapsible soil was low since the tinge needed to destruct the bonding force of clay was not enough. 4. The understanding about the cyclic behaviour of collapsible soil may be helpful to predict the elastic & residual strain of the foundations by the earthquake together with the damage by the additional failure.

  • PDF

Static and dynamic responses of a tied-arch railway bridge under train load

  • Gou, Hongye;Yang, Biao;Guo, Wei;Bao, Yi
    • Structural Engineering and Mechanics
    • /
    • 제71권1호
    • /
    • pp.13-22
    • /
    • 2019
  • In this paper, the static and dynamic responses of a tied-arch railway bridge under train load were studied through field tests. The deflection and stresses of the bridge were measured in different static loading scenarios. The dynamic load test of the bridge was carried out under the excitation of running train at different speeds. The dynamic properties of the bridge were investigated in terms of the free vibration characteristics, dynamic coefficients, accelerations, displacements and derailment coefficients. The results indicate that the tie of the measuring point has a significant effect on the vertical movement of the test section. The dynamic responses of arch bridge are insensitive to the number of trains. The derailment coefficients of locomotive and carriage increase with the train speed and symmetrically distributed double-line loads reduce the train derailment probability.