• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.2_2
• /
• pp.325-332
• /
• 2024

Contemporary power systems demand efficient and sustainable technologies. Single-phase induction motors, while widely used, face efficiency challenges due to inherent rotor losses. Proposed solutions include the Line-start Permanent Magnet Synchronous Motor (LSPMSM), leveraging permanent magnets for enhanced energy density but facing demagnetization and cost issues. Alternatively, the Line-start Synchronous Reluctance Motor (LSRM) operates as a hybrid motor without permanent magnets, reducing rotor losses and potentially improving efficiency. This paper focuses on designing an LSRM rotor for air conditioner compressors, analyzing start-up characteristics and efficiency through finite element analysis. A comparative study with single-phase induction motors provides insights for future motor technology selection, balancing efficiency and other requirements.

• Korean Journal of Applied Biomechanics
• /
• v.28 no.3
• /
• pp.151-158
• /
• 2018

Objective: In this study, we analyzed kinematic changes in the start phase of speed skating before and after physical training. Method: We introduced a new strength training program (2017) that was improved in terms of exercise type and intensity [%, one repetition maximum (1RM)] compared with the previous strength training program (2016). The new program was applied to elite speed skating athletes (four males and four females). To determine the improvement in starting technique, we recorded race images during the start phase of the 500-m race held in 2016 and 2017. The race images were collected using five high-speed cameras and kinematic characteristics of the start phase were analyzed by three-dimensional image analysis. Results: The 1RMs were improved by 11% on an average after the strength training. In 2017, records of four out of the eight athletes were shortened in terms of the initial lap time (100 m), and 500-m records were shortened in six athletes. The time to nine strokes was shortened in five athletes, and the ratio of correct kinetic chain was increased or maintained at a high level in six athletes. Conclusion: In this study, the new strength training program (2017), applied to elite speed skating athletes, showed a positive effect on starting technique and reduced the record times.

• Journal of Information Technology Applications and Management
• /
• v.10 no.4
• /
• pp.65-84
• /
• 2003

The Purpose of this study is to Identify and analyze the factors that determine the survival or success of internet-based companies in the start-up phase. The reason why we focus on companies which are in the early stage of development is because internet business is still at its early stage, and statistics indicate that many internet businesses have failed during the start-up phase. Using the model of new product outcomes proposed by Cooper(1979), we have formulated a conceptual model for more successful internet business ventures. On the basis of this model, the relationship between the financial and non-financial performance and various variables in the model is analyzed. For collecting empirical data, a web-based survey questionnaire was designed. A total of 97 usable questionnaires were gathered from internet companies nationwide. The results showed that controllable variables such as the commercial entity and information acquired during the new business process are related to the non-financial performance, while environment variables such as the compatibility of the resource base of the firm with the business, including a few controllable variables, are related to the financial performance. Future research needs to explore more precisely how the success factors are different according to the types of internet businesses and/or the stages of growth of the business.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.spc
• /
• pp.54-60
• /
• 2023

The government focuses on promoting start-ups, fostering ventures, and creating an ecosystem of start-ups through the formation of a strong growth environment for small businesses. This study provides academic and practical implications about ways of improving our business incubator's support service across stages of growth through IPA. To this end, an Importance-Performance Analysis (IPA) was conducted to analyze relationship and differences in importance and satisfaction of business incubator's support service support at business incubation center. These results present to provide the following academic and practical implications. The academic implications are the need for differences in support services for each phase of start-up growth. As factors that could increase the likelihood of successful start-up were identified in each phase of the start-up growth, important information needed for policy and strategy was provided. As a practical suggestion, the managers and expert groups are presented with sections to be opened for each start-up growth stage, minimum effort input, and areas to be maintained continuously. A systematic support plan is established and a foundation is provided for improvement measures in efficient start-up business incubator's support service.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.258-265
• /
• 2018

This paper proposes an algorithm for reducing the starting current when the single-phase induction motor starts and analyzes its operation. Generally, the single-phase induction motors require several starters to generate the starting torque due to their structural characteristics. In this paper, a capacitor-start / capacitor-run method of the single-phase induction motor is basically adopted. This conventional method is efficient and has a large starting torque, but it generates about 5 ~ 6 times of inrush current at startup. As a result, the freezer starting device and peripheral devices are damaged and life time may be reduced. To reduce the inrush current, the current control algorithm based on the virtual dq model is presented to control the starting current. In addition, it validates the proposed algorithm through experiments to smooth transit from start-up operation to the rated operating region.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.807-808
• /
• 2006

This paper covers start-up characteristic of three phase induction motor. When three phase induction motor is started, the inrush current occurs. There are several ways of reducing starting current of a three phase motor. In this paper will explain and propose the types of part windings in order to reduce the starting current.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.1
• /
• pp.49-56
• /
• 2009

This paper shows the characteristic analysis of single-phase line start permanent magnet (LSPM) motors considering the overhang structure. To achieve the low-cost design of an LSPM motor, the overhang structure is adapted for the rotor with a constraint of a fixed magnet volume. To obtain the dynamic and steady performance of the motor, the circuit parameters are extracted using the 3D-static FEM(Finite Element Method) and the d-q equivalent circuit is used. The performance of the model with overhang is compared with the conventional model without overhang on the condition that both models have a fixed volume for the permanent magnet.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1720-1728
• /
• 2018

This paper proposes a novel soft starting algorithm by using PWM inverter technique to control an amplitude of the motor starting current at a single-phase induction motor (SPIM). Traditional SPIM starting methods such as a Split-Phase, Capacitor-Start, Permanent-Split Capacitor (PSC), Capacitor-Start Capacitor-Run (CSCR), basically cannot control the magnitude of starting current due to the fixed system structures. Therefore, in this paper, a soft starting algorithm based on a proportional resonant (PR) control with a variable and constant frequency is proposed to reduce the inrush current and starting up time. In addition, a transition algorithm for operation modes is devised to generate a constant voltage and constant frequency (CVCF). The validity and effectiveness of the proposed soft starting method and transition algorithm are verified through experimental results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.12
• /
• pp.2186-2193
• /
• 2008

The growth on consideration of energy savings and motor efficiency has caused the LSPM(Line Start Permanent Magnet Motor) to be focused as a substitute for conventional induction motors. A Line start permanent magnet motor able to be driven at synchronous speed is designed based on a single phase induction motor in this paper. The single phase LSPM is identical to the induction motor except a permanent magnet is installed in the rotor. As the permanent magnet influences the characteristics of both transient state and steady state, a design considering both starting and synchronization conditions was used. In this paper, by adopting DOE, a single phase motor has been designed showing high power and smooth start. Also, optimal model is selected by weighting function. And the characteristics demagnetization are analyzed according to the variation of magnet shape. Finally, to verify the design results, a prototype was measured.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.111-113
• /
• 1989

This paper reports the optical characteristics of TeS$_{5}$ Ge$_{5}$ thin film. In phase diagram, TeS$_{5}$ Ge$_{5}$ has the eutetic point with the loweat melting point. Therfore, TeS$_{5}$ Ge$_{5}$ thin film will be melted by Diode Laser with low energy. TeS$_{5}$ Ge$_{5}$ thin films start to change the phase from amorphous to crystalline near 10$0^{\circ}C$, but perfectly change the phase at 28$0^{\circ}C$. As-deposit TeS$_{5}$ Ge$_{5}$ thin film start to change the phase to crystalline in enviroment og 66$^{\circ}C$ 80%RH.circ}C$ 80%RH.