• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.129-135
• /
• 2017

Recently, with the development of IoT technology, there has been an increase in interest in the power consumption of the devices used by the internal devices. Especially, the standby power consumption during the main function of the devices is about 11% of the power energy and the problem of standby power interruption is suggested. However, there is a problem that the plug must be unplugged in order to substantially shut off standby power. Therefore, in this paper, we design and implement a standby power cutoff algorithm that can automatically control and manage users' participation in order to solve there problems. As a result of evaluating the implemented system, it was confirmed that the standby power interruption rate improved by about 5.89Wh on average compared to the existing system.

• Journal of Power Electronics
• /
• v.19 no.3
• /
• pp.691-701
• /
• 2019

To solve the problems in the contact charging of inspection robots, a wireless charging system for inspection robots and a control strategy are introduced in this paper. Circuit models of a wireless power system with a compound compensation circuit and a three-phase Class-D resonant inverter are set up based on circuit theory. An output voltage control method based on the equal spread regulation of the phase difference between adjacent phases and the parameter correction method in the primary compound compensation circuit are proposed. The dynamic characteristics of the key parameters varying with the secondary coil position are obtained to further investigate the adaptive location scheme during the access and exit processes of moving robots. Combining the output voltage control method and the adaptive location scheme, a transition control strategy for the standby and operation modes of the wireless charging systems for inspection robots is put forward to realize the system characteristics including the low standby power in the standby mode and the high receiving power in the operation mode. Finally, experiments are designed and conducted to verify the correctness of the theoretical research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.616-622
• /
• 2020

Recently, as the interest in power saving increases with the development of IoT technology, research on power saving of smart devices, which are being miniaturized, is being actively conducted. In particular, due to the diversification of IoT-based smart devices and the increase in personal penetration rate, the issue of standby power even when not in use is increasing. However, there is a drawback of physically unplugging the outlet or turning off the power in order to substantially reduce standby power. Since Zigbee is used instead of the existing IP, it is necessary to change to the IoT standard protocol based on the Internet network. Therefore, this paper designed and implemented the standby power saving system applying CoAP, the IoT standard protocol, to the existing Zigbee technology. Existing systems and evaluations confirmed that the average standby power of about 8.4Wh was reduced.

• Journal of Power Electronics
• /
• v.15 no.4
• /
• pp.1131-1138
• /
• 2015

This study presents an input-powered high-efficiency interface circuit for energy harvesting systems, and introduces a zero standby power design to reduce power consumption significantly while removing the external power supply. This interface circuit is composed of two stages. The first stage voltage doubler uses a positive feedback control loop to improve considerably the conversion speed and efficiency, and boost the output voltage. The second stage active diode adopts a common-grid operational amplifier (op-amp) to remove the influence of offset voltage in the traditional comparator, which eliminates leakage current and broadens bandwidth with low power consumption. The system supplies itself with the harvested energy, which enables it to enter the zero standby mode near the zero crossing points of the input current. Thereafter, high system efficiency and stability are achieved, which saves power consumption. The validity and feasibility of this design is verified by the simulation results based on the 65 nm CMOS process. The minimum input voltage is down to 0.3 V, the maximum voltage efficiency is 99.6% with a DC output current of 75.6 μA, the maximum power efficiency is 98.2% with a DC output current of 40.4 μA, and the maximum output power is 60.48 μW. The power loss of the entire interface circuit is only 18.65 μW, among which, the op-amp consumes only 2.65 μW.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.631-633
• /
• 2000

Modern consumer electronic products like TV, VCR etc, offer users the convience of switching the equipment on and off via a remote control handset. When this type of equipments is switched off, it is said to be in standby mode. In this paper, We proposed that the method of the blocking standby power Son in industrial product including electronic and electronic appliauces. This method is perfectly blocking the standby power of electrical circuit.

• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.873-877
• /
• 2009

In order to use railway system standby power, produced 160Ah NiMH battery that would be able to substitute the lead acid battery or NiCd battery form which contain the toxic material in environment, using parallel connected 80Ah NiMH battery. And in order to develop proper electrode in the 160Ah NiMH battery, tested high rate discharge performance of the ternary electrolyte. 160Ah NiMH battery evaluated the various test in order to use railway system standby power.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.5
• /
• pp.334-339
• /
• 2012

A study on electrical and electronic equipment will occur in the atmosphere, which is essential to cut the power to prevent the waste of power by power measurement technology development and to develop the technology to do this operation is the main core of standby power to detect and block it and return the configured for software and hardware, while the actual construction to ensure stability through field testing and debugging of problems improved accordingly, as well as ease of installation and so it could be done while the test. In addition, in terms of basic hardware switching of standby power when blocking, reducing stress and ensure stable operation and circuit design, power off and back to ensure stable operation even when a protection circuit is applied.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.4
• /
• pp.299-306
• /
• 2009

Recently, although the power consumption of the flyback converter at the light load and standby power load was minimized by the burst mode operation of PWM IC, flyback converter has still the low efficiency characteristics by the high magnetizing current flowing through magnetizing inductance of transformer. This paper proposes a novel flyback converter with an improved efficiency characteristics and the reduced magnetizing current at the light load and standby power load. Prototype of the 70W multi-output flyback converter for an auxiliary power module of 50 inch PDP TV is built and the experimental results are described.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.1
• /
• pp.1-8
• /
• 2010

This paper presents the self-oscillating flyback converter for reducing standby power without a control-IC. The proposed self-oscillating flyback converter includes a DC-Blocking capacitor for reducing constant power loss of initial switching path of a conventional self-oscillating flyback converter. it's possible to reduce the standby power to 1W and power efficiency. To confirm the validity of proposed system, comparison of conventional system, verification of experimental results is presented by realization of 35W power system.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.407-410
• /
• 1999

Potential-source controlled excitation system had been developed for synchronous generator in In-Chun thermal power plant #4 by KEPRI. This paper describes the characteristics of Main/Standby control system employed analog, digital circuit devices (hybrid type) and 3 PCRs(Phase Controlled Rectifier)