• 한국자동차공학회논문집
• /
• 제18권6호
• /
• pp.122-129
• /
• 2010

The military vehicles are necessary to perform various war battle missions but in reality they are not as convenient as the civil vehicles. Thus, it is problematic regarding the satisfaction about convenience, operation, and performances of military vehicles. Since most of military vehicles used in Korea were made by bench-marking the models of United States developed in the latter half of 1970's. It is question whether the current military vehicles can provide the functions and expected performance fully or not if we do not study what the user friendly military vehicles are. This article report soldiers' user satisfaction survey on military vehicles and provide arguments on the priority decision based on users' requirements. Future direction for the development of military vehicles is discussed.

• 한국군사과학기술학회지
• /
• 제15권5호
• /
• pp.543-549
• /
• 2012

Hybrid electric propulsion systems are expected as future primary combat platforms because the systems can supply enough electric power, easily locate components inside vehicles, and maneuver without undesired noise. However, increasing electric/electronic/software usage causes abnormal failure patterns which have not been noticeable in conventional automotive. Recently, the functional safety standard for road vehicles were enacted and vehicle manufacturers request their components which satisfy standardized quality. This research analyzes functional safety standards(IEC 61508 and ISO 26262) and compares the standards for road vehicles with military standards of system safety. Strategies to apply functional safety in the combat hybrid electric vehicle are scrutinized.

• 한국ITS학회 논문지
• /
• 제21권6호
• /
• pp.284-298
• /
• 2022

자율주행 자동차의 원활한 주행을 위해서는 도로상에 설치된 교통안전시설에 대한 정보 취득이 필요하다. 이에 본 연구는 자율주행 자동차에게 교통안전시설에 대한 표준화 된 정보를 제공하려는 방안으로 한국형 통합 메시지 셋 설계 방안을 마련하는 것을 목적으로 하였다. 연구에서는 자율주행 자동차의 주행을 위해 제공되어야 하는 정보에 따라 필요한 교통안전시설을 4가지 기준(법적 근거, 자율주행 자동차에 대한 정보 제공 유무, 중복된 정보 제공 유무, 기준 및 설치 형태의 모호성)에 따라 구분하였다. 주행 시 제공되는 정보의 중요도(12대 중과실, 행동 변화)에 따라 정보 전달의 우선순위를 구분하고, 전달 정보의 분류 코드 형태를 정의하였다. 마지막으로, SAE J2735 준용을 위한 교통안전시설의 정보 위치와 전달 방안을 파악하였다. 본 연구는 향후 자율주행 자동차의 실 도로 주행에 앞서, 일반 운전자 기준으로 설치된 교통안전시설이 자율주행 자동차에게 정보를 제공하는 방안을 제시함으로써 미래 도로의 운영 방안을 마련하였다는 데 의의가 있다.

• 한국환경과학회지
• /
• 제9권6호
• /
• pp.469-474
• /
• 2000

The traffic accidents in large cities such as Pusan metropolitan city have been increased every year due to increasing of vehicles numbers as well as the gravitation of the population. In addition to the carelessness of drivers, many meteorological factors have a great influence on the traffic accidents. Especially, the number of traffic accidents is governed by precipitation, visibility, cloud amounts temperature, etc. In this study, we have analyzed various data of meteorological factors from 1992 to 1997 and determined the standardized values for contributing to each traffic accident. Using the relationship between meteorological factors(visibility, precipitation, relative humidity and cloud amounts) and the total automobile mishaps, and experimental prediction formula for their traffic accident rates was seasonally obtained at Pusan city in 1997. Therefore, these prediction formulas at each meteorological factor may by used to predict the seasonal traffic accident numbers and contributed to estimate the variation of its value according to the weather condition it Pusan city.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.365-368
• /
• 2005

The dynamic model was developed to analyze vibration acceleration and ride comfort during the operation of rubber-tired light rail vehicles. The ride comfort for standing passengers was analyzed in accordance with ISO 2631-1, UIC 513R, and CEN Draft prENV 12299 using this model. The result was applied to the detail design of Korean-standard, rubber-tired light rail vehicles, and the detail specifications related to ride comfort was determined based on this result. The ride comfort test was performed along the test track by using 2 car-train, and its result was compared with that of the ride comfort analysis, verifying the validity of the developed dynamic model. It was also verified whether or not the developed Korean-standardized, rubber-tired light rail vehicle met specified target specifications on ride comfort.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• 한국군사과학기술학회지
• /
• 제25권1호
• /
• pp.1-8
• /
• 2022

Electronic equipment mounted on military vehicles is exposed to external shocks and vibrations. This causes problems in tactical operation and also causes cost loss in equipment maintenance. Therefore, to optimize the test standards for military vehicles with vibration, dynamic characteristics should be analyzed and standardized through actual driving tests. In this paper, the internal structure of 2.5tons military vehicle is designed in the form of a drawer and lathe, and the dynamic characteristics are identified by experiment, and the design is proposed.

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.382-388
• /
• 2010

본 논문은 샌드위치 복합재가 적용된 철도차량 차체 구조물을 위한 표준유한요소모델을 제시하였다. 최근 샌드위치 복합재는 높은 굽힘 강성 및 강도를 가지며 차체의 경량화와 공간 확보를 통해 에너지 효율을 향상시킬 수 있어 국내의 많은 분야에서 널리 사용되고 있다. 그러므로 복합재 철도 차량의 제작 전에 유한요소법 등을 통해 구조안전성을 검증해야 한다. 본 연구에서는 다양한 철도차량의 실제 구조시험과 같은 수직, 압축, 비틀림 하중 및 고유진동수 해석을 통해 철도차량 구조물의 표준유한요소모델을 검증 제시하였다. 그 결과, 샌드위치 패널의 굽힘 강성을 향상시키기 위한 보강 금속 프레임에는 빔 요소보다는 사각 쉘 요소가 적절하였으며, 샌드위치 패널의 허니콤 코어와 적층복합재의 경우 적층 쉘 요소와 비교하여 적층 쉘 요소와 솔리드 요소를 사용하는 것이 적절하다. 또한, 제안된 표준유한요소모델은 유한요소모델의 수정 없이 충돌모델에 적용할 수 있는 장점을 가지고 있다.

• 한국컴퓨터정보학회논문지
• /
• 제18권8호
• /
• pp.33-41
• /
• 2013

최근 지능형자동차 기술은 IT와 융합되어 새로운 첨단 영상미디어 응용기술로 발전하며, 오픈소스 기반의 안드로이드를 탑제한 스마트폰 응용기술과 지능형자동차 개발이라는 새로운 패러다임으로 많은 연구개발이 이루어지고 있다. 안드로이드 기반의 지능형자동차 응용 기술은 이동수단의 한계를 넘어 다양한 멀티미디어 중심의 집합기술로 진화하고 있으며, 이러한 분산 환경에서 개발되어 있는 각각의 멀티미디어 플랫폼서비스와 애플리케이션이 개발되고 있음에 따라 다양한 서비스 기술을 통한 휴대 단말장치기술이 절대적으로 요구되고 있다. 본 논문에서는 안드로이드 기반의 지능형 자동차 전용 미들웨어 설계를 통하여 단일형 시스템 스펙에 맞춰 SVC Codec과 실시간 동영상, 그래픽처리등 지능형자동차 미들웨어 SoC 설계를 통해 응용 연구를 실험 하였으며, 오픈플랫폼에서 제공되는 각종 단말서비스 기능들을 SoC 기반으로 새롭게 설계하고 표준화된 인터페이스 분석기법을 본 연구에서 실험을 통하여 입증하였다.

• 전기학회논문지
• /
• 제63권8호
• /
• pp.1146-1151
• /
• 2014

The equipment in ships and railway vehicles are continuously exposed to vibration, and its durability is very important. Therefore, consumers require the verification of the performance of equipment via standardized tests under the given environments to improve and stabilize the performance. In this study, a durability improvement and stabilization plan was proposed, which included the exploratory vibration test, variable frequency test and endurance test for the electrical equipment according to the vibration environment. It is expected that this study results will improve the technological competitive power of the ship and railway-related manufacturers and contribute to the equipment development and export.