• Journal of Computing Science and Engineering
• /
• v.8 no.1
• /
• pp.34-42
• /
• 2014

Time-predictability of computing is critical for hard real-time and safety-critical systems. However, currently there is no metric available to quantitatively evaluate time-predictability, a feature crucial to the design of time-predictable processors. This paper first proposes the concept of architectural time-predictability, which separates the time variation due to hardware architectural/microarchitectural design from that due to software. We then propose the standard deviation of clock cycles per instruction (CPI), a new metric, to measure architectural time-predictability. Our experiments confirm that the standard deviation of CPI is an effective metric to evaluate and compare architectural time-predictability for different processors.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1995.04a
• /
• pp.59-64
• /
• 1995

The impediment in enhancing the ship safety and combating vessel-source marine pollution depends on the combination of the immediate and mediate factors. The former is mainly caused by human errors and failure in compliance with the international convention standards in operation of compliance with the international convention standards in operation of vessel. The latter by the attitudes and activities of some of the flay states taking little responsibilities with appropriate seriousness in policing their fleets due to the lack of implementing capability of adminstrations. So long as there exists a large size of variation in implementing capability of administration between flag states a globally remarked progress cannot expect to be made in assuring the ship safety and preventing the vessel-source pollution Therefore a new regulatory regime is suggested to be adopted by IMO to maintain high standard flag state adminstrations by recommending standard paradigm to member states so that the development of a implementing culture is encouraged and supported.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.3
• /
• pp.273-278
• /
• 2008

In this paper, effects of thermoelastic stress by using lock-in thermography was measured in the cantilever beam. In experiment, a circular holed plate was applied to analyze variation of transient stress under the condition of repeated cyclic loading. And the finite element modal analysis as computational work was performed. According to the surface temperature obtained from infrared thermography, the stress of the nearby hole was predicted based on thermoelastic equation. As results, each stress distributions between 2nd and 3rd vibration mode were qualitatively and quantitatively investigated, respectively. Also, dynamic stress concentration factors according to the change of vibration amplitude were estimated for the resonance frequency.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.9
• /
• pp.1663-1667
• /
• 2011

Voltage variation caused by large loads such as arc furnace and large motors, which use the large and instantaneous currents, can cause the voltage flicker. The flicker irritates the human's eyes and also has an adverse effect on protection device, rotating machine and electronic device etc, therefore the flicker needs to be managed effectively. Recently, the Korea power quality standard has been established on the IEC standards. This paper presents the flicker management standard for distribution power system and suggests the flicker transfer coefficients for Korea power system based on the IEC 61000-3-7.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.715-718
• /
• 2000

The character of a recombinant bioluminescent bacteria's light emission enables us to monitor toxicity in water, soil and air. In this study, various bioluminescent responses to water samples containing toxic chemicals, such as phenol and mitomycin C, were obtained and analysed through the use of a multi-channel two-stage minibioreactor system. The bioluminescent pattern from each channel can be used as a standard for identifying the degree of toxicity in field samples. When various concentrations of toxic chemicals were injected in a step manner, different bioluminescent patterns were obtained. Also this system showed variation in its bioluminescent pattern as the injection manner was changed, i.e. using a modified version of the bell-curve type injection. In conclusion, the toxicity was shown to be related with the bioluminescent response when using these standard bioluminescent patterns. Comparing this standard with a bioluminescent response from a field sample, we can estimate the degree of which the sample is toxic.

• Speech Sciences
• /
• v.7 no.2
• /
• pp.209-224
• /
• 2000

This paper proposes an automatic detection method of intonational and accentual phrases in Korean standard continuous speech. We use the pause over 150 msec for detecting intonational phrases, and extract accentual phrases from the intonational phrases by analyzing syllables and pitch contours. The speech data for the experiment are composed of seven male voices and two female voices which read the texts of the fable 'the ant and the grasshopper' and a newspaper article 'manmulsang' in normal speed and in Korean standard variation. The results of the experiment shows that the detection rate of intonational phrases is 95% on the average and that of accentual phrases is 73%. This detection rate implies that we can segment the continuous speech into smaller units(i.e. prosodic phrases) by using the prosodic information and so the objects of speech recognition can narrow down to words or phrases in continuous speech.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.927-932
• /
• 2000

Recently, construction vibration has caused annoyance for a number of dwellers in nearby construction field and that induced from operating of large construction equipment, has become a very serious issue in our living environment. But, construction vibration standard of our living environment. But construction vibration standard of our country is efficient. Especially, directly blow method(diesel piling method, oil pressure method, etc) has caused much problems of highly impactive vibration. Construction works, in order to solve these problem, will be used SIP(Soilcement Injected Precast Pile) method of low vibration equipment. In this point, this study attempts to survey on the characteristics of piling vibration by SIP method for various earth conditions in construction field. And this study intends to get the basic data to establish a standard about construction vibration.

• Journal of KSNVE
• /
• v.7 no.5
• /
• pp.797-801
• /
• 1997

This paper raises issues in testing the absorption coefficients of sound-absorptive samples using the standing wave apparatus according to the Korean standard of KS F 2814. The standard code does not consider any effect of air-damping which is significant in testing relatively low sound-absorptive samples. This limitation has been shown to yield much variation of sound absorption coefficients for recent samples tests whose coefficients are less than 10%. An improved method of calculating the sound absorption coefficients is proposed in this work and its effectiveness in real test is also illustrated. Finally, the guideline for the modification of our national standard code KS F 2814 is proposed.

• YAKHAK HOEJI
• /
• v.31 no.5
• /
• pp.343-346
• /
• 1987

The effect of mixing ratios of active ingredient on the content uniformity of tablets was studied using caffeine as active ingredient and hydroxypropyl starch as diluent. In the case that caffeine content was not more than 1%, the standard deviation of individual tablet assays was inversely proportional to caffeine content. In the case of more than 1%, the standard deviation was constant independently of caffeine content. In the case that the designed tablet weight was not more than 200mg, the standard deviation of individual tablet assays was inversley proportional to tablet weight designed. In the case of more than 200mg, it was constant and the results for weight variation against the designed weight showed same tendency.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.2
• /
• pp.55-68
• /
• 2000

Joint photographic experts group (JPEG) is a standard still-image compression technique, established by the international organization for standardization (ISO) and international telecommunication standardization sector (ITUT). The standard is intended to be utilized in the various kinds of color still imaging systems as a standard color image coding format. Because JPEG is a lossy compression, the decompressed image pixel values are not the same as the value before compression. Various distortions of JPEG compression and JPEG recompression has been reported in various papers. The Image compressed by JPEG is often recompressed by same type compression method in JPEG. In general, JPEG is a lossy compression and the quality of compressed image is predicted that is varied in according to recompression Q-factor. In this paper, four difference color samples(photo image, gradient image, gradient image, vector drawing image, text image) were compressed in according to various Q-factor, and then the compressed images were recompressed according to various Q-factor once again. As the result, this paper evaluate the variation of image quality and file size in JPEG recompression and recommed the optimum recompression factor.