• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1341-1350
• /
• 2017

In this paper, a high reliability 30W DC-DC converter is designed considering military standard (MIL-STD) for military applications such as guided weapon and aircraft. The performances and specifications of conventional military grade DC-DC converter are practically analyzed. The requirements for military grade DC-DC converter are established in consideration of MIL-STD and analysis results of conventional product. Two isolated DC-DC converter, forward and fly-back converter, are designed and compared to determine topology. From experimental results under various operating conditions, the forward topology satisfied performances and specifications of MIL-STD for military DC-DC converter.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.668-672
• /
• 2009

Heavy metal ion immobilization properties of microporous ettringite (3Ca$O{\cdot}Al_2O_3{\cdot}3CaSO_4{\cdot}32H_2$) body were examined using standard solutions of typical heavy metals. Microporous Ettringite body with desirable shape for an ionic adsorbent was obtained by the self hardening of the paste prepared from the mixture of tricalcium aluminate($C_3$A) and gypsum(CaS$O_4{\cdot}2H_2$O). Crushed grains of ettringite were soaked in each standard solutions of Pb, Co, Cd, Mn and Cr concentrated at 200 ppm. In order to evaluate the ionexchange and immobilization ability, the ionic concentration of the filtrate solution as well as the solution obtained after leaching test was measured. As a result, for the heavy metal ions excepting Cr, porous ettringite body was revealed to be excellent in ionic exchange and immobilization properties though some ions eluted at the severe condition of pH 2. The adsorption and keeping capacity for four heavy metals showed the order of $Pb{>}Co{>}Cd{>}$Mn.

• Korean Journal of Materials Research
• /
• v.9 no.5
• /
• pp.491-495
• /
• 1999

In this study, we focus on Ca contaminant which affects on the roughness Si substrate after thermal process. The initial Si substrates were contaminated intentionally by using a standard Ca solution. The contamination levels of Ca impurity were measured by TXRF and the chemical composition of that was analyzed by AES. Then we gre the thermal oxide to investigate the effect of Ca contaminants. The microroughness of the Si surface, the thermal oxide surface, and the surface after removing the thermal oxide were measured to examine the electrical characteristics. The initial substrates that were contaminated with the standard solution of Ca exhibited the contamination levels of 10\ulcorner~10\ulcorneratoms/$\textrm{cm}^2$ which was measured by TXRF. The Ca contaminants were detected by AES and exhibited the peaks of Ca, SI, C and O.After intentional contamination, the surface microroughness of this initial substrate was increased from $1.5\AA$ to 4$\AA$ as contamination levels became higher. The microroughness of the thermal oxide surfaces of both contaminated and bare Si substrates exhibits similar values. But the microroughness of the contaminated$ Si/SiO_2$ interface was increased as contamination increased. The thermal oxide of contaminated substrate exhibited the small minority carrier diffusion length, low breakdown voltage, and slightly high leakage current.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.5
• /
• pp.969-973
• /
• 2008

Solvent extraction using a Schiff-base, salen$(NEt_2)_2$, as a chelating agent has been conducted on several water samples to study the determination of trace Cu(II), Mn(II) and Zn(II). Experimental conditions for the formation and extraction of metal complexes were optimized with an aqueous solution similar in composition to the samples. The matrix difference between the sample and standard solutions was approximately matched, and the pH of each sample solution was adjusted to 9.5 with $NaHCO_3/NaOH$ buffer. The concentration of salen$(NEt_2)_2$ was $7.3\;{\times}\;10^{-3}$ mol/L, and the complexes were extracted into MIBK solvent followed by the measurement of AAS absorbance. The potential interference of concomitant ions was investigated, but no interference from alkaline and alkali earth ions was shown in this procedure. The given procedure is precise, as judged from the relative standard deviation of less than 5% for five measured data. The recovery of 93-103% shows that this method is quantitative for such trace metal analysis.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.12
• /
• pp.1731-1736
• /
• 2003

The reaction of ${\alpha}$-Benzilmonoxime with palladium(II) produces a green complex in triton X-100 micellar media. Palladium has been determined using zero and first derivative spectrophotometric methods. The absorbances of Pd(II)- ${\alpha}$--benzilmonoxime complex at 441.8 and 677.0 nm in 0.10 M perchloric acid solution were monitored and linear working ranges of 0.3-12.0 and 0.7-20 ${\mu}$g mL$^{-1}$ with detection limits of 0.07 and 0.10 ${\mu}$g $mL^-1$ were obtained, respectively. Also, recoveries in the range of 92.8 to 100.1% and relative standard deviations in the range of 0.4 to 7.1% were obtained. First derivative spectrophotometry has also been applied for palladium determination under the optimum condition. The linear dynamic range of 0.2-24.0 ${\mu}$g $mL^{-1}$ palladium with relative standard deviations of 0.6-6.9% and recoveries in the range of 94.9-102.5% has been obtained by first derivative spectrophotometry. The method shows high selectivity because of the high concentration of acid used, which prevents formation of complexes of ${\alpha}$--benzilmonoxime with the other cations. The palladium complex formed was stable at least one day. The method was successfully applied to the determination of palladium in some synthetic palladium alloys and palladium-charcoal powder.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.134-139
• /
• 2008

Most approaches for continuous review inventory problem need tables for loss function and cumulative standard normal distribution. Furthermore, it is time-consuming to calculate order quantity (Q) and reorder point (r) iteratively until required values are converged. The purpose of this paper is to develop a direct method to get the solution without any tables. We used approximation approaches for loss function and cumulative standard normal distribution. The proposed method can get the solution directly without any iterative procedure for Q, r and without any tables. The performance of the proposed approach is tested by using numerical examples. The budget constraint of this paper assumes that purchasing costs are paid at the time an order is arrived. This constraint can be easily replaced by capacity constraint or budget constraint in which' purchasing costs are paid at the time an order is placed.

• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.212-218
• /
• 2021

Low-power and Lossy Networks (LLNs) have become the common network infrastructure for a wide scope of Internet of Things (IoT) applications. For efficient routing in LLNs, IETF provides a standard solution, namely the IPv6 Routing Protocol for LLNs (RPL). It enables effective interconnectivity with IP networks and flexibly can meet the different application requirements of IoT deployments. However, it still suffers from different open issues, particularly in large-scale setups. These include the node unreachability problem which leads to increasing routing losses at RPL sink nodes. It is a result of the event of memory overflow at LLNs devices due to their limited hardware capabilities. Although this can be alleviated by the establishment of multi-sink topologies, RPL still lacks the support for effective load balancing among multiple sinks. In this paper, we address the need for an efficient multi-sink load balancing solution to enhance the performance of PRL in large-scale scenarios and alleviate the node unreachability problem. We propose a new RPL objective function, Multi-Sink Load Balancing Objective Function (MSLBOF), and introduce the Memory Utilization metrics. MSLBOF enables each RPL node to perform optimal sink selection in a way that insure better memory utilization and effective load balancing. Evaluation results demonstrate the efficiency of MSLBOF in decreasing packet loss and enhancing network stability, compared to MRHOF in standard RPL.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.26 no.4
• /
• pp.296-309
• /
• 2022

Timer options are one of the contingent claims that, for given the variance budget, its payoff depends on a random maturity in terms of the realized variance unlike the standard European vanilla option with a fixed time maturity. Since it was first launched by Société Générale Corporate and Investment Banking in 2007, the valuation of the timer options under several stochastic environment for the volatility has been conducted by many researches. In this study, we propose the pricing of timer power options combined with standard timer options and the index of the power to the underlying asset for the investors to actualize lower risks and higher returns at the same time under the uncertain markets. By using the asymptotic analysis, we obtain the first-order approximation of timer power options. Moreover, we demonstrate that our solution has been derived accurately by comparing it with the solution from the Monte-Carlo method. Finally, we analyze the impact of the stochastic volatility with regards to various parameters on the timer power options numerically.

• Journal of Soil and Groundwater Environment
• /
• v.12 no.6
• /
• pp.53-59
• /
• 2007

Optimal quenching curves have been studied for the accurate analysis of $^{14}C$ in groundwater polluted by reducing efficiency of volatile organic compounds (VOCs) in liquid scintillation counter (LSC). The quenching parameters (SQP(E)) were measured for ten VOCs such as benzene, toluene, ethylbenzene, o-(m-,p-)xylene, trichloroethylene (TCE), tetrachloroethylene(PCE), carbon tetrachloride and chloroform. The quenching curves were plotted using $^{14}C$ standard solution and chloroform as a quenching agent. Optimal plotting conditions were determined for standard solution, LSC measuring time and the concentration of chloroform. The quenching effects of chlorinated organic compounds such as TCE, PCE, carbon tetrachloride and chloroform were greater than those of BTEX (benzene, toluene, ethylbenzene and xylene). Optimum measuring time was 100 minutes far 7,000 dpm/mL standard solution. A few mL of chloroform should be added for good quenching curves. These quenching curves have good correlation coefficients (> 0.99) and the curves could be applied to accurate analysis of $^{14}C$ in groundwater and tap water.

• The Journal of Internal Korean Medicine
• /
• v.35 no.4
• /
• pp.455-471
• /
• 2014

Objectives: This experiment was done for investigating antimicrobial activity of Hwangryunheadok-tang and Scutellariae Radix extract, Phellodendri Cortex extract, Coptis Rhizoma extract, Gardenia Jasminoides extract against Staphylococcus aureus. Methods: After administering S. aureus on a bacterial culture media plate, antimicrobial activity was tested by dripping $80{\mu}l$ diluted Hwangryunheadok-tang and Scutellariae Radix extract, Phellodendri Cortex extract, Coptis Rhizoma extract, and Gardenia Jasminoides extract (100%, 50%, 10%, 1%) on plates that were cultivated for a span of time from 16 to 72 hours. Also, minimal inhibitory concentration (MIC) was tested by dripping the minimum dilution density solution that has antimicrobial activity between $80{\mu}l$ and $20{\mu}l$ ($80{\mu}l$, $60{\mu}l$, $40{\mu}l$, $20{\mu}l$) in measure of density. Antimicrobial activity of Hwangryunheadok-tang and four kinds of extracts against S. aureus was continually displayed. Results: 1. S. aureus (Standard Microorganism, ATCC) (1) Antimicrobial activity was displayed for Hwangryunheadok-tang, Scutellariae Radix extract, and Phellodendri Cortex extract respectively in the undiluted solution and 50% of diluted magnification. Gardenia Jasminoides extract showed its activity only in the undiluted solution; Coptis Rhizoma extract showed its activity down to 10% of diluted magnification. The antimicrobial activity of the undiluted solution was increased when the volume of inoculation increased. But, there was no difference when time was extended for cultivation. (2) MIC of Hwangryunheadok-tang, Scutellariae Radix extract was 50%, $20{\mu}l$. Coptis Rhizoma extract was 10%, $20{\mu}l$, Phellodendri Cortex extract was 50%, $80{\mu}l$ and Gardenia Jasminoides extract was 100%, $60{\mu}l$. 2. S. aureus isolated from diarrheal patients (1) When compared to standard microorganism, MIC has decreased. As a result, their antimicrobial activity has increased. (2) Antimicrobial activity of Hwangryunheadok-tang and four extracts was continually shown in extending of the time, 16, 24 and 72 hours. Conclusions: The author comes to the conclusion that Hwangryunheadok-tang, and four kinds of extracts have antimicrobial activity against S. aureus. Especially, when comparing standard microorganisms with S. aureus isolated from diarrheal patients, some cases showed that antimicrobial activity of all the extracts were better than antibiotics. Thus, if a further study is performed, the use of Hwangryunheadok-tang, and four kinds of extracts will be valuable and beneficial in clinical treatments.