• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.793-806
• /
• 2022

As the IMO introduced MASS (Maritime Autonomous Surface Ships), ISO(International Organization for Standardization) announced ISO 19847 of a maritime data sharing standard for collecting and remotely managing data of ship systems. Previous literature evaluated the risk using HAZOP for ISO 19847 and proved that risk assessment is useful through experiments. However, redundancy of ISO 19847 ship data server which is one of the risk reduction method suggested in previous literature, was designed but couldn't tested due to the limitations of the conditions. So, in this study, to prove the usefulness of the ship data server redundancy of ISO 19847 which was not tested in previous literature. It based on the design of previous literature, and the network of ship data servers was modeled using the SES/DEVS format and simulated using the DEVS# open source library.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.862-870
• /
• 2016

AIS and V-PASS, which are used for safe navigation and automatic vessel arrival and departure, are mandatory standard equipment installed on all ships. If an aircraft is equipped with a ship identification system using AIS and V-PASS, and then ship identification information is received by a vessel such as a large fishery inspection boat or a patrol ship or a ground control system, we can quickly perform maritime surveillance and disaster response. This paper describes the development of a ship identification and display system using a ship identification device for aircraft. Flight test results and a future application plan are also included.

• Journal of Ocean Engineering and Technology
• /
• v.14 no.3
• /
• pp.100-105
• /
• 2000

Port State Control (PSC) is the inspection of foreign ships in national ports for the purpose of verifying that the condition of the ships and its equipments comply with the requirement of international conventions and the ship is manned and operated in compliance with applicable international laws. On the other hand, check items in PSC are nearly similar to periodical survey of Classification Societies, because they have the same background regarding safety and maritime pollution prevention. The purpose of this study is to develope computer-aided information system for ship inspection item which is useful for effective implementation of Port State Control. For this work, the status of PSC is reviewed, and the related scheme of ship survey system in Classification Societies is investigated. On these bases, a computer software integrated database system and object-oriented technique is developed. The developed system is expected helpful to establish and maintain an effective system of Port State Control.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2000.10a
• /
• pp.165-170
• /
• 2000

Port State Control (PSC) is the inspection of foreign ships in national ports for the purpose of verifying th\ulcorner the condition of the ships and its equipments comply with the requirement of international conventions and the ship is manned and operated in compliance with applicable international laws. On the other hand, check items in PSC are nearly similar to periodical survey of Classification Societies, because they have the same background regarding safety and maritime pollution prevention. The purpose of this study is to develope computer-aided information systems for ship inspection item which is useful for effective implementation of Port State Control. For this work, the status of PSC is reviewed, and the related scheme of ship survey system in Classification Societies is investigated. On these bases, a computer software integrated database system and object-oriented technique is developed. The developed system is expected helpful to establish and maintain an effective system of Port State Control.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.4
• /
• pp.124-132
• /
• 1996

This paper discusses a scheduling system effective for producing optimum load distribution in ship design process with particular reference to an accommodation design. Through various analysis of the factors influencing the effectiveness of design process control, it was possible to formulate an algorithm of producing an optimum design schedule. Basic manhours far the ship to be planned by multiplying a difficulty level coefficient for the standard manhours for each design activity is preset, and is converted into manhours for the ship to be planned by multiplying a difficulty level coefficient for the ship. A relation matrix of the design activities is employed in representing the network of the activities. The computerized system showed very effective in producing a design schedule of leveled work load on which particular characteristics of a ship to be planned are properly reflected.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.1
• /
• pp.142-156
• /
• 2015

A new method for ship Inner Shell optimization, which is called Parametric Inner Shell Optimization Method (PISOM), is presented in this paper in order to improve both hull performance and design efficiency of transport ship. The foundation of PISOM is the parametric Inner Shell Plate (ISP) model, which is a fully-associative model driven by dimensions. A method to create parametric ISP model is proposed, including geometric primitives, geometric constraints, geometric constraint solving etc. The standard optimization procedure of ship ISP optimization based on parametric ISP model is put forward, and an efficient optimization approach for typical transport ship is developed based on this procedure. This approach takes the section area of ISP and the other dominant parameters as variables, while all the design requirements such as propeller immersion, fore bottom wave slap, bridge visibility, longitudinal strength etc, are made constraints. The optimization objective is maximum volume of cargo oil tanker/cargo hold, and the genetic algorithm is used to solve this optimization model. This method is applied to the optimization of a product oil tanker and a bulk carrier, and it is proved to be effective, highly efficient, and engineering practical.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.3
• /
• pp.124-132
• /
• 2020

The purpose of this paper is to establish the basic procedure and method for selection of preferred anti-fouling paint considering economic analysis according to ship's speed loss based on ISO 19030 that has been published in 2016 to prescribe practical methods for measuring changes in ship specific hull and propeller performance. In this study, six (6) anti-fouling paint products have been assumed for alternatives with each target maximum average speed loss and carried out comparison of the alternatives and sensitivity analysis in assumed conditions for selection of the preferred alternative.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.3 no.3
• /
• pp.181-192
• /
• 2011

Recently, the speed of change related with enterprise management is getting faster than ever owing to the competition among companies, technique diffusion, shortening of product lifecycle, excessive supply of market. For the example, the compliance condition (such as delivery date, product quality, etc.) from the ship owner is getting complicated and the needs for the new product such as FPSO, FSRU are coming to fore. This paradigm shift emphasize the rapid response rather than the competitive price, flexibility and agility rather than effective and optimal perspective for the domestic shipbuilding company. So, domestic shipbuilding companies have to secure agile and flexible ship production environment that could respond change of market and requirements of customers in order to continue a competitive edge in the world market. In this paper, I'm going to define a standard shipbuilding production management system by investigating the environment of domestic major shipbuilding companies. Also, I'm going to propose a unified ship production management and system for the operation of unified management through detail analysis of the activities and the data flow of ship production management. And, the system functions for the strategic approach of ship production management are investigated through the business administration tools such as performance pyramid, VDT and BSC. Lastly, the research of applying strategic KPI to the digital shipyard as virtual execution platform is conducted.

• Korean Journal of Computational Design and Engineering
• /
• v.18 no.4
• /
• pp.267-274
• /
• 2013

This study focuses on the data schema and data content, which includes maintenance data, data structures and illustration data relevant with the maintenance process of ship and offshore structures. Product lifecycle management (PLM) is expected to encompass all the product data generated for the operation and maintenance information as well as the design and production. This paper introduces a data exchange schema in PLM of ship and offshore, serving as the basis for the role of standards required by the middle-of-life PLM. Also this paper identifies a typology of standards relevant to PLM that addresses the schema of evolving standards and identifies a XML schema supporting the exchange of data related with maintenance operations. Technical document based on standards in accordance with S1000D and Shipdex is explained. A case study illustrating the use of standard data exchange and technical document is presented.

• Journal of Fisheries and Marine Sciences Education
• /
• v.24 no.6
• /
• pp.872-883
• /
• 2012

Generally the determination of turning basin for vessels of entering & sailing in the berth has been considered in the design standard of harbor construction rules of the port. In this regard, the turning basin has been determined by the max size of entering vessel of the berth/port. But the size of turning basin may considered the ship's maneuvering ability, operator's skillful power, mooring equipments of the berth, arrangement of the fairway and the environment condition of weather & seas around the designated port area. So this paper suggested the optimum size of turning basin after studying the harbour design rules of the advanced marine countries and using by maneuvering simulator for turning basin size and also evaluated the design standard of harbor construction rules and minimum size of turning basin against ship's length at the Gangjung civil/naval port of Jeju Island.