• Smart Structures and Systems
• /
• v.16 no.4
• /
• pp.579-591
• /
• 2015

This paper investigates a magnetoelectric (ME) vibration energy harvester that can scavenge energy in arbitrary directions in a plane as well as wide working bandwidth. In this harvester, a circular cross-section cantilever rod is adopted to extract the external vibration energy due to the capability of it's free end oscillating in arbitrary in-plane directions. And permanent magnets are fixed to the free end of the cantilever rod, causing it to experience a non-linear force as it moves with respect to stationary ME transducers and magnets. The magnetically coupled cantilever rod exhibits a nonlinear and two-mode motion, and responds to vibration over a much broader frequency range than a standard cantilever. The effects of the magnetic field distribution and the magnetic force on the harvester's voltage response are investigated with the aim to obtain the optimal vibration energy harvesting performances. A prototype harvester was fabricated and experimentally tested, and the experimental results verified that the harvester can extract energy from arbitrary in-plane directions, and had maximum bandwidth of 5.5 Hz, and output power of 0.13 mW at an acceleration of 0.6 g (with $g=9.8ms^{-2}$).

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.188-191
• /
• 2016

In this paper, we propose energy-efficient automatic power controller which can power on and off the signboard at the specified light intensity using the Illuminance Detector. By using segmented section Classification algorithm, light intensity setup system propose variable resistor method which makes users more easy to control. Automatic light on-off system set a standard by measured illuminance data. Measured light-intensity through the Illuminance Detector are communicated with the signboard power controller with wireless communication, and it controls lighting system. In this paper, we evaluated the Energy-Efficient Automatic Power Controller of The Signboard using illuminance detector. Experimental results in lightless environment shows that the error rate is less than 3% by Accredited Testing Laboratories.

• Journal of Radiation Protection and Research
• /
• v.8 no.1
• /
• pp.26-32
• /
• 1983

A somewhat detailed energy spectra in terms of the track length resulting from coupled electron-photon slowing down are calculated throughout the ICRU standard tissue with uniformly distributed gamma sources of $^{60}Co\;and\;^{137}Cs$, respectively. The calculation was accomplished by utilizing the latest available cross-section data as input to a carefully optimized computer code. In this report, the calculational method is described in detail. Furthermore, results of calculations are given in graphical form. The results show that the energy spectrum defined in terms of differential track length has about same shape although the energies of gamma source are different. The discontinuity in the energy spectrum appears at the energy of $T=(1/T_0+2/m_0c^2)^{-1}$, because a primary photon can not be degrade to a point below this energy.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.591-599
• /
• 1994

A design system for power transmission bevel gears(straight, zerol, and spiral) is developed, in which the strength and durability of bevel gears can be estimated and the size of bevel gears can be minimized by introducing optimal techniques. The size of bevel gear pair as the object function to be minimized is the volume of equivalent spur gear pair at mean normal section, and the design variables to be determined are considered as the number of teeth, face width, diametral pitch, and spiral angle in spiral bevel gear. The strength(bending strength, pitting resistance) according to the AGMA standards, geometrical quantities, and operating characteristics(interference of pinion, contact ratio, etc.) are considered as the constraints in design optimization. The optimization with these constraints becomes nonlinear problem and that is solved with ALM(Augmented Lagrange Multiplier) method. The developed design method is applied to the example designs of straight, zerol, and spiral bevel gears. The design results are acceptable from the viewpoint of strength and durability within the design ranges of all other constraint, and the bevel gears are designed toward minimizing the size of gear pair. This design method is easily applicable to the design of bevel gears used as power transmitting devices in machineries, and is expected to be used for weight minimization of bevel gear unit.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.48-55
• /
• 1999

Ths paper presents an optimization method which determines locations and size of capacitors simultaneously while minimizing power losses and improving voltage profile in radial distribution systems. Especially, the cost function associated with capacitor pla.cerrent is considered as step function due to banks of standard discrete capacities. Genetic algorithms(GA) are used to obtain efficiently the solution of the cost function associated with capacitors which is non-continuous and non-differentiable function. The strings in GA consist of the node nwnber index and size of capacitors to be installed. The length mutation operator, which is able to change the length of strings in each generation, is used. The proposed Jrethod which determines locations and size of capacitors simultaneously can reduce power losses and improve voltage proftle with capacitors of minimum size. Its efficiency is proved through the arolication in radial distribution systems.ystems.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.221-230
• /
• 1999

Corrosion of rebars can occur if there are cracks, moisture and availability of oxygen or carbonation proceeds, chloride penetrates and diffuses in concrete. Once rebars in concrete corrodes, subsequently accompanied with scaling, spalling in concrete cover. As a result of them, the RC structure is seriously deteriorated. In this study, theoretical review and experiments for cathodic protection(CP) have been performed to control corrosion of rebars in concrete contained chlorides and pre-crack. For CP the impressed current system was applied, the protection effect was investigated when rebars was directly contacted with salt water due to crack and open to much chlorides in concrete. In order to investigate the effect of protection, when CP was energized for 1 year, half-cell potential, potential-decay with current density, corrosion ratio, etc. were measured. With the cathodic protection by impressed current system, the depolarized values of all specimen were met NACE Standard, the effect of 34~84% of the ratio of corrosion area and 84~86% of cross-section reduction were calculated.

• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.121-121
• /
• 2003

The standard protocol for the production of transgenic mouse from ES-injected embryo has to process via chimera producing and several times breeding steps, In contrast, tetraploid-ES cell complementation method allows the immediate generation of targeted murine mutants from genetically modified ES cell clones. The advantage of this advanced technique is a simple and efficient without chimeric intermediates. Recently, this method has been significantly improved through the discovery that ES cells derived from hybrid strains support the development of viable ES mice more efficiently than inbred ES cells do. Therefore, the objective of this study was to generate transgenic mice overexpressing human resistin gene by using tetrapioid-ES cell complementation method. Human resistin gene was amplified from human fetal liver cDNA library by PCR and cloned into pCR 2.1 TOPO T-vector and constructed in pCMV-Tag4C vector. Human resistin mammalian expression plasmid was transfected into D3-GL ES cells by lipofectamine 2000, and then after 8~10 days of transfection, the human resistin-expressing cells were selected with G418. In order to produce tetraploid embryos, blastomeres of diploid embryos at the two-cell stage were fused with two times of electric pulse using 60 V 30 $\mu$sec. (fusion rate : 93.5%) and cultured upto the blastocyst stage (development rate : 94.6%). The 15~20 previously G418-selected ES cells were injected into tetraploid blastocysts, and then transferred into the uterus of E2.5d pseudopregnant recipient mice. To investigate the gestation progress, two El9.5d fetus were recovered by Casarean section and one fetus was confirmed to contain human resistin gene by genomic DNA-PCR. Therefore, this finding demonstrates that tetraploid-ES mouse technology can be considered as a useful tool to produce transgenic mouse for the rapid analysis of gene function in vivo.

• The Research Journal of the Costume Culture
• /
• v.1 no.2
• /
• pp.131-144
• /
• 1993

Even though it has been to research on the variance of clothing pressure and on its effect of human body, it has not been available to evaluate the clothing pressure as an objective standard ta for the determination of an extra quantity of bodice' basic pattern. In this paper the basic pattern(the close adherence original shape) is determined by a drawing of plane figure after detaching an unweaving clothing from the inside of the gypsum, and the extra quantity is figured by a extension quantity when is formatted with 0.5, 1.0, 1.5 cm extra quantity longitudinal-cross section figures. With our experimental method, review the variance of clothing pressure according to difference of the extra quantity which was figured with subjects wearing experimental clothing including the extra quantity. The difference of the extra quantity was able to calculate with data form the subjects when anatomical position and five movements, then compare with subjects wearing non-extra quantity experimental clothing. The results of experiment as the follows : 1. There is only few body portions with the significant variance according to the increasing of he extra quantity at he body portion and the sleeve portion. 2. The clothing pressure of the sleeve portion was higher than the clothing pressure of the body portion. The difference of clothing pressure according to the variance of the extra quantity at the sleeve portion is more significant than the body portion. 3. Consider several important pressure points which wil be the No. 1 at the front of body portion. No. 17, 18 at the back of body portion and No. 21 at the sleeve portion. 4. It is important to have plane figure of gypsum when format an basis pattern.

• Journal of the Korean Home Economics Association
• /
• v.35 no.1
• /
• pp.169-190
• /
• 1997

The purpose of this study is to investigate the perception of middle school students about Home Economics course especially in the area of Food and Nutrition. For this purpose anempirical survey was conducted using structured questionnaire from 482 students in the 2nd grade of middle school. The questionnaire contained questions about the general concept of home Economics course and general concept and the degree of the perceived need of Food and Nutrition part of the course. The data of analysis are frqequency percentile mean standard-deviation chi-square one-way ANOVA t-test and Scheff-test. The major findings of this study are as follows. The major findings of this study are as follows. First students show a tendency to perceive Home Economics education is $\ulcorner$related with ethics of human life for both sexes$\lrcorner$which is stronger in girls than in boys. Boys had a tendency to perceive that Home economics is related with $\ulcorner$home making skills in food clothing housings etc.$\lrcorner$or $\ulcorner$for girls and women only $\lrcorner$which is weaker in girls. Second students also show a tendency to perceive Home Economics is important and to agree that Home Economics must be taught to both sexes. This tendency is stronger in girls than in boys, Third students show a tendency to perceive that food and Nutrition part is related with $\ulcorner$meeting problems in food choices and nutrition$\lrcorner$which is stronger in girls than in boys. Fourth girls are more interested in Food and Nutrition part than the other parts and likely to practice what they learned in Food and Nutrition part of their 1st grade and became to pay attention to their eating patterns. These tendencies are weaker in boys.

• Journal of the Korean GEO-environmental Society
• /
• v.8 no.6
• /
• pp.13-19
• /
• 2007

This study examines a cause for damage of synthetic resins straight pipe occurred after pipe construction of underground electric power duct pipelines of ${\bigcirc}$ section work, ${\bigcirc}$ line, ${\bigcirc}{\bigcirc}$ city railroad. For this, we analyzed a parameter used for plan and structural analysis through a literature review. And the site condition was analyzed in detail, and test construction of the pipe line that simulated the site pipe line and test on compaction by watering were performed. In addition, an examination on subsurface settlement influence of foundation ground through a structural safety and a numerical analysis of power transmission pipe line was performed. As a result of the performance, relative density gained by compaction by watering was more than average and relative degree of compaction according to technical specification standard showed the result of about 90% in the case of good compaction by watering.