• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1031-1040
• /
• 1997

This study was done to analyze the body surface developments of armhole area. The major conclusions of this study are: 1. The body surface developments showed the characteristics of expansion and contraction of body at armhole area. By arm movements, front armhole lines on the body surface developments of upper arm were slow going, but back armhole lines were full and round. As a whole, armhole line of the back torso was swollen outside especially at backarmpit point area, it seemed like a line of raglan sleeve. 2. Regression Analysis was carried out to adapt armhole line on the upper arm and upper body to bodice and sleeve pattern, following the axillary circumference line and chest breadth line changed to the basic pattern form. As the result, armhole lines of 90$^{\circ}$ and 135-180$^{\circ}$ movements deviated from those of standard posture. U-type, clear armhole curve of standard posture turned to V-type, slanting line by arm movements.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.133-140
• /
• 2000

Drilling and blasting method for excavating rock mass is generally used in underground construction; but this technique has some shortcomings. For instance, rock mass damage is inevitable during drilling and blasting, and blast-induced vibration frequently causes some problems. Until now, field measurement method is used to predict the overbreak and vibration; but it has many limitations. Therefore, numerical analysis method is needed to overcome such limitations, and to estimate and predict damage and vibration due to tunnel blasting in the design stage. In this study, damage zone of rock mass due to stoping and contour blasting is compared based on standard tunnel blasting pattern, and the propriety of the standard tunnel blasting pattern is estimated. Then, blasting pattern is optimized so that the damage zone due to sloping blasting with reduced charge is consistent with that due to contour blasting.

• 대한상한금궤의학회지
• /
• v.5 no.1
• /
• pp.19-29
• /
• 2013

Objective : The purpose of this study is to analyze the naming of 'A diagnostic system based on Shanghanlun six meridian patterns and provisions' and to suggest an alternative naming. Methods : 1. The meaning of 'Six meridian(六經)' was reviewed on existing theories and Shanghanlun provisions. 2. Comparing the name of diangostic system with the term in 'Korean Standard Classification of Diseases-6(KCD-6)' and term in 'WHO international standard terminologies on traditional medicine in the western pacific region' was done. Results : 'Six meridian' is customary used in the Shagnhanlun study but its meaning is not match with original Shanghanlun system and could possibly make misunderstanding. So 'Disease pattern identification' is suitable than 'Six meridian' for this diagnostic system. Conclusions : This study suggests that using 'A disease pattern identification diagnostic system based on Shanghanlun provisions.'is more appropriate instead of using the name of the six meridian diagnostic system.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.714-717
• /
• 1996

This paper presents a fault detection and diagnosis methodologies based on weighted symptom model and pattern matching between the coming fault propagation trend and the simulated one. At the first step, backward chaining is used to find the possible cause candidates for the faults. The weighted symptom model(WSM) is used to generate those candidates. The weight is determined from dynamic simulation. Using WSMs, the methodology can generate the cause candidates and rank them according to the probability. Secondly, the fault propagation trends identified from the partial or complete sequence of measurements are compared to the standard fault propagation trends stored a priori. A pattern matching algorithm based on a number of triangular episodes is used to effectively match those trends. The standard trends have been generated using dynamic simulation and stored a priori. The proposed methodology has been illustrated using two case studies and showed satisfactory diagnostic resolution.

• Journal of the Korean Society of Industry Convergence
• /
• v.18 no.4
• /
• pp.241-249
• /
• 2015

The purpose of this research is to develop the pattern recognition algorithm based on smart camera for inspection automation, and including external surface state of molding parts or optical parts. By performance verification, this development can be applied to establish for existing reflex data because inputting surface badness degree of scratch's standard specification condition directly. And it is pdssible to distinguish from schedule error of badness product and normalcy product within schedule extent after calculating the error comparing actuality measurement reflex data and standard reflex data mutually. The proposed technology cab be applied to test for masearing of the smallest 10 pixel unit. It is illustrated the relibility pf proposed technology by an experiment.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.18 no.3
• /
• pp.1-7
• /
• 2022

In this study, inaccurate RSSI values of beacons are corrected using extended Kalman filter. For the experiment, the beacon was manufactured using Arduino Uno board and HM-10 Bluetooth module. RSSI values according to the distance between beacon and the viewer were measured at intervals of 1m, 1.5m, 2m, 2.5m, 3m, 3.5m, 4m, 4.5m, and 5m. To remove the irregular signal pattern of the beacon, the extended Kalman filter was applied to obtain the average and standard deviation of the actual distance and the measured distance, and it was confirmed that more than 76.6% of the irregular signal pattern was removed after using the extended Kalman filter.In addition, through the smartphone app, it was confirmed that the distance accuracy between the beacon and the measurer was less than the actual distance and the measured distance within 2m, and the standard deviation was small.

• The Journal of Internal Korean Medicine
• /
• v.27 no.1
• /
• pp.237-252
• /
• 2006

Objectives : This study was done to investigate clinical frequency and correlation among the indicators of dampness-phlegm pattern identification settled by tentative Korean Standard Differentiation of the Symptoms and Signs for Stroke. Methods : The subjects were 147 hospitalized patients with stroke, and a list of registry was made for each of them. Among the five types of pattern identification, fire-heat, dampness-phlegm, blood-stasis and deficiency of Qi and of Yin, those that have shown a high frequency in dampness-phlegm type were categorized as the dampness-phlegm pattern group. Frequency of dampness-phlegm indicators was compared with those from the non-dampness-phlegm pattern group. Correlations among dampness-phlegm indicators were also studied. Results : 1. Dampness-phlegm pattern group included 26 patients out of 147. 2. Among the indicators of dampness-phlegm pattern. those, in order of highest frequency, were 'tiredness or sluggishness', 'white Coated tongue' and 'sputum'. 3. In comparing dampness-phlegm pattern group with non-dampness-phlegml group, the indicators such as 'lightheadedness', 'nigrescence', 'sputum', 'dermatic dysaesthesia' showed significantly high frequency. 4. Among the indicators, 'sputum' and 'tiredness or sluggishness', 'sputum' and 'yellow coated tongue', and 'white coated tongue' and 'yellow coated tongue' showed significant correlation. 5. In investigation of the correlation of scale in symptoms, various results such as positive correlation and negative correlation were obtained. Conclusion : In this study, more sensitive indicators of dampness-phlegm pattern identification were found. Based on these results, it is suggested that a more practical Korean Standard Differentiation of the Symptoms and Signs of Stroke would be established through continuous clinical studies by giving weight on each specific type of pattern identification.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.131-138
• /
• 2001

The performance analysis of an electronic equipment test is very complicate due to the variety o vehicles. In this study, automatic design system for the electronic equipment test has been carried out using the standard load patterns. For the test, standard signal patterns for each item are modeled. The test items can be decided by the user by means of these patterns. Also, engineering software modules are developed and proved to be very efficient for analyzing the test results statistically. Experiments are performed for the test system in the vehicle assembly line. By analyzing the test results, it is found that bad samples can be detected without failure. Also, the engineering software modules provide an analytical tool for the automation of the test process.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.715-718
• /
• 2000

The character of a recombinant bioluminescent bacteria's light emission enables us to monitor toxicity in water, soil and air. In this study, various bioluminescent responses to water samples containing toxic chemicals, such as phenol and mitomycin C, were obtained and analysed through the use of a multi-channel two-stage minibioreactor system. The bioluminescent pattern from each channel can be used as a standard for identifying the degree of toxicity in field samples. When various concentrations of toxic chemicals were injected in a step manner, different bioluminescent patterns were obtained. Also this system showed variation in its bioluminescent pattern as the injection manner was changed, i.e. using a modified version of the bell-curve type injection. In conclusion, the toxicity was shown to be related with the bioluminescent response when using these standard bioluminescent patterns. Comparing this standard with a bioluminescent response from a field sample, we can estimate the degree of which the sample is toxic.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.17 no.2
• /
• pp.129-138
• /
• 2013

A spatio-temporal models as systems of ODE which describe two-species Beddington - DeAngelis type predator-prey system living in a habitat of two identical patches linked by migration is investigated. It is assumed in the model that the per capita migration rate of each species is influenced not only by its own but also by the other one's density, i.e. there is cross diffusion present. We show that a standard (self-diffusion) system may be either stable or unstable, a cross-diffusion response can stabilize an unstable standard system and destabilize a stable standard system. For the diffusively stable model, numerical studies show that at a critical value of the bifurcation parameter the system undergoes a Turing bifurcation and the cross migration response is an important factor that should not be ignored when pattern emerges.