• Korean Journal of Human Ecology
• /
• v.16 no.5
• /
• pp.969-977
• /
• 2007

The research thesis has been intended to make a comparative analysis on the basic bodice pattern and basic skirt pattern changing on the basis of setting waist line of dress form in an effort to set reasonable standards in selecting the standard lines of drees form. The thesis has made the wearing evaluation by producing the sample of upper and lower dress based on A pattern and B pattern. In details, A pattern functions to keep waist line flatly down from lateral waist-right to posterior waist in a little curved state, paralleling bust line and hipline with waistline. And, B pattern functions to keep waistline, bust line and hipline horizontal paralleling with ground surface. SPSS win 10.1 program was used for the analysis of evaluation and t-test. The result is as follows: For basic bodice-front of upper dress, A and B patterns have made little significant difference. With regard to basic bodice-back, B pattern has got the higher evaluation than A pattern, in the pattern stability and appearance. For basic skirt pattern, A pattern has got the lower evaluation in the aspect of total back appearance, back dart, hip line, and waist line, and front drape. Basic bodice pattern of A pattern, which takes on the different horizontal standard lines of dress form depending on the selection of waistline, and basic skirt pattern has scored less in terms of pattern stability and appearance.

• The Journal of Internal Korean Medicine
• /
• v.32 no.2
• /
• pp.232-242
• /
• 2011

Objectives : The purpose of this study was to develop the Korean standard pattern identifications for stroke-III (KSPIS-III). KSPIS-III includes 4 major pattern identifications (PIs) and clinical indicators for each. Methods : To extract the indicators for 4 major PIs, we analyzed 1548 clinical data from 15 traditional Korean medicine hospitals. Patients got acute stroke within 30 days from onset. Two physicians independently checked 65 indicators and performed pattern diagnosis. If the PI were diagnosed the same, PI would be confirmed. First we built an assumption model that set up the relationship among pattern identifications. Second, we extracted the indicators for fire-heat pattern and qi deficiency pattern by comparison between excessive and deficiency group, heat and non-heat group. By comparing yin deficiency pattern and 3 other patterns respectively, we extracted the indicators for yin deficiency pattern. Dampness-phlegm pattern indicators were extracted by the same method. Results : After cross tabulation with 65 indicators on the basis of our assumption model, we finally extracted 19 indicators for fire-heat pattern, 11 for qi deficiency pattern, 7 for yin deficiency pattern, and 7 for dampness-phlegm pattern. Conclusions : KSPIS-III was more improved than KSPIS-II because it was based on more clinical data. Further study to establish the PI diagnostic model would be required for practical use in the clinical field.

• Journal of the Korean Society of Costume
• /
• v.53 no.6
• /
• pp.131-143
• /
• 2003

This treatise deals with the profitable suit image design of middle-aged men by examining visual effects in physical design. The sample of this study is people who lives in Kwangju, the Republic of Korea and 20-50 age's men and women. And it is very variety in each population statistics factors the differences of associate design visual effect which considering the difference of sex and age group, numbers of button, a figure and material pattern. Firstly, look into the associate design visual effect by sex and button number. In men's group, the style with three buttons was the most attractive and that with two buttons was the least attractive. In 50's group, the style with two buttons was the least attractive and those with 1.3 and 4 buttons were a little attractive. Secondly, in the difference of associate design with sex and shape, men's group was considered that standard type was the most attractive shape, women's group was thought that lean and standard types were the most attractive shape. So we can know that the attractive shape is different with sex. In the difference of association design with age and shape, 20's considered that standard type was the most modernistic and fat type was the least modernistic. 30's considered that lean type was the most modernistic and 50's thought that fat type and standard type were the most modernistic. Thirdly, see the sex and material pattern. In familarity, men's group considered that stripe pattern was more familiar than checks and plain patterns. And they considered that striped pattern and plain was more manly than checks. In sex and material pattern, 20's thought that plain was the most attractive, stripe was the next, and checks was not attractive. 40's estimated that plain and stripe were more attractive than checks. 50's judged that stripe was the most attractive material. Thus. the attraction is different with ages and material patterns.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.167-179
• /
• 1995

The only three elements such as RQD, N -value and Es were used as a quantitative standard for the design of supporr pattern determidetion on subway line 8th in Seoul. Because the support pattern that was obtained by these elements could not he determined on the basis of the quantitative of geology and the orientations and properties of discontinuity planes, there have been some problems in determining the economic support pattern and tunnel stability. Therefore, in an attempt to determine the stable and economic support pattern with more quantitative elements, more flerrible rock mass classification with geologic conditions was performed by using RMR at 1745 sections and Q-system at 374 sections within Seongnam block on subway line 8th. Then, rusults by these two methods were compared with standard support pattern of the subway line 8th. Moreover, relationships between geology, geologic structures and topography to rock mass grades were studied. According to the rusult of this study, it is judged that the standard support pattern designed with PD-4 or PS - 4 should have been subdivided into 4~6 support patterns. Some sections where geologic structures such as faults and joints are developed tend to have rock mass grades. And they also have low rock mass grades near valley. On thr other hand, they show intermediate grades at piedmont area and the greatest ones at high mountains.

• The Research Journal of the Costume Culture
• /
• v.13 no.1
• /
• pp.47-59
• /
• 2005

This study aims to measure stretch rate of standard weight in the $2{\times}1$ rib stitch and $2{\times}2$ rib stitch, and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, $2/48's{\times}2$, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, 15gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results: From the functional estimate of knit patterns made by standard stretch rate of each stitch, the 20gf weight sample clothes of $2{\times}1$ and $2{\times}2$ rib stitchs were in high estimate. For the bust, B/4~ -4.6cm knit pattern was made of $2{\times}1$ rib stitch, B/4~5.3cm of $2{\times}2$ rib stitch. In conclusion, because $2{\times}1$ and $2{\times}2$ rib stitchs has the much higher stretch rate in the direction of the course than $0{\times}0$ ad $1{\times}1$ rib stitchs, high stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.769-780
• /
• 2004

This study aims to measure stretch rate of standard weight in the direction of the knit stitch course by the difference in the way of weaving rib stitch, the most elastic stitch of all the knit stitches and to apply features of rib stitch to the knit pattern. The reviewer examined the sample knit for test with 100% wool, 2/48's 2, 12 gauge, and then made knit patterns and sample clothes for test considering stretch rate of standard weight of 10gf, l5gf, 20gf, 25gf based on the results from the former test, and finally estimated the try-outs for sample clothes. This study came out with the following results. From the functional estimate of knit patterns made by standard stretch rate of each stitch, the l5gf weight sample clothes of 0×0 and 1×1 rib stitches looking similar to plain stitch. For the bust, B/4-1.0㎝ knit pattern was made of 0×0 stitch, B/4-1.2㎝ of 1×1 rib stitch. In conclusion, because rib stitch has the much higher stretch rate in the direction of the course than other stitches, low stretch rate of standard weight should be applied to the case of making knit wear. It is expected that this will lead stable sizing and measurement system when used in making knit patterns, and satisfy knit wearers' various needs.

• Journal of the Korean Home Economics Association
• /
• v.37 no.9
• /
• pp.57-71
• /
• 1999

This study was intended to find the body pattern of the middle-aged women and to make new experimental basic pattern for upper-half of the body for them. To analyze the body pattern of middle-aged women, the methodologies of measurement of the individual part of the body, group aged-analysis, Rohrer Index, Vervaeck Index, factor analysis, discriminant analysis, cluster analysis and girth index were used. The comparison of the twentieth to the thirtieth, the fortieth and the fiftieth showed bigger change in the thirtieth and the biggest change in the fortieth in girth. The fiftieth showed thick body pattern by increasing the depth but decreasing the girth. Body types were divided into three groups, thin, standard and fatty troupes by Rohrer index. With Rohrer Index, there was no difference for back length in three groups, but girth showed shorter in thin and standard groups but longer in fatty group.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.119-124
• /
• 1999

This paper presents new approach to technology pattern recognition of camera back cover and test of soldering. In real-time implementing of pattern recognition camera back cover and test of soldering, the MVB-03 vision board has been used. Image can be captured from standard CCD monochrome camera in resolutions up to 640$\times$480 pixels. Various options re available for color cameras, a synchronous camera reset, and linescan cameras. Image processing os performed using Texas Instruments TMS320C31 digital signal processors. Image display is via a standard composite video monitor and supports non-destructive color overlay. System processing is possible using c30 machine code. Application software can be written in Borland C++ or Visual C++

• Journal of the Korean Home Economics Association
• /
• v.19 no.2
• /
• pp.107-121
• /
• 1981

The objective of this study is to establish a standard size for clothing construction and to develop a basic bodice pattern for Misses. 1. Seven kinds of pattern generally used in Korea were collected and compared in the aspect of items of necessary measurements and application of measurements to pattern drawing. 2. 209 girls aged 17 to 25 were measured on 22 items. The measurements were analyzed by calculation of means, standard deviations, co-variance, range, maximum, minimum, and correlation co-efficient between each item. the data were classified into four size groups according to bust size. Correlation co-efficient between each item were as follows: 1) Correlation co-efficients of bust to upper bust and waist were very high. 2) Correlation co-efficients of bust to shoulder width, across back and across chest were relatively high (r=.6385, r=.7493, r=.6344, respectively). 3) Bust had little correlation to neck and shoulder slope.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.6
• /
• pp.94-101
• /
• 2007

In the Hard Disk Drive(HDD) production, the detect pattern or defective HDD set is important information to diagnosis of defective HDD set. This paper proposes a pattern recognition neural network for the defect distribution of HDD. In this paper, 5 characteristics are determined for the classification to six standard defect pattern classes. A multi-layer perceptron is trained for the pattern classification the inputs of which are 5 characteristic values and the 6 outputs are the nodes of standard patterns. The experiment with proposed neural network shows satisfactory results.