• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.5
• /
• pp.57-75
• /
• 2011

The purpose of this study is to find ways of evaluating the suitability of sites being considered for development of different types of parks in the vicinity of yangmock-myun kyoung buk, where a large project(as large as about14.0$km^2$) has been planned. The results are as follows. Three surveys for selecting the assessment indicators were performed. ${\cdot}$ The first survey analyzed the importance of 23 selected assessment indicators based on a review of existing literature review and an on-the-spot research. ${\cdot}$ The second survey selected assessment indicators for each park type. ${\cdot}$ The third survey computed additive values of selected assessment indicators by the park types. It used a method of standardizing the average importance of indicators by making their sum equal to 10. These additive values were then multiplied by each grade of indicators to make a final evaluation. An evaluation of the site-suitability of park types was performed twice. The purpose of the first evaluation was to figure out how much each type met the minimum requirements targeted for all landscape types. The minimum requirements were derived by using a relative comparison between the standard of value rating of the assessment indicators, which was over the medium magnitude on the importance analysis, and the result of field research. A second evaluation estimated the targeted sites that met the minimum requirements. Value ratings of second assessment indicators were quantitatively divided as 1 to 3 grade and the evaluation scores were added, giving an additive value for each assessment indicator. The evaluation score on each park type was rated on a scale of 1 to 3 according to their averages, (from lowest to highest). Since this evaluation model of the site suitability on park types only focused on the 'face' of space in this study, additional analysis is necessary for setting the evaluation model and incorporating the overall impact of space, network connection and other factors, considering 'spot', 'line' and 'face' aspects of space.

• Herbal Formula Science
• /
• v.22 no.1
• /
• pp.167-176
• /
• 2014

Objectives : This study investigated the improvement effects of Gangjihwan (DF) and combination of Gangjihwan and Gamisochehwan (GSH) on nonalcoholic fatty liver disease in a high fat diet-induced obese mouse model. Methods : Eight-week-old C57BL/6N mice were divided into five groups: a normal lean group given a standard diet, an obese control group given a high fat diet, and atorvastatin, DF, and DF+GSH groups given a high fat diet with atorvastatin (10 mg/kg), DF (40 mg/kg), and DF+GSH (80 mg/kg), respectively. After 8 weeks of treatment, body weight gain, blood lipid markers, ALT concentrations, liver weight and histology were examined. Results : 1. Body weight gain was significantly decreased in DF, DF+GSH and atorvastatin groups compared with control. The extent of decreases was eminent in DF+GSH group. 2. Circulating concentrations of total cholesterol, HDL-cholesterol and LDL-cholesterol were decreased in DF, DF+GSH and atorvastatin groups compared with control. The decreases were significant in DF+GSH and atorvastatin groups. 3. Liver weights were decreased in DF, DF+GSH and atorvastatin groups compared with control. In particular, liver weight was significantly reduced only in DF+GSH group. 4. Hepatic lipid accumulation was significantly decreased in DF, DF+GSH and atorvastatin groups compared with control, and the magnitude of which was more effective in DF+GSH group than in DF-only group. 5. Circulating ALT concentrations were decreased in DF, DF+GSH and atorvastatin compared with control, but ALS levels were significantly reduced only in DF+GSH group. Conclusions : In conclusion, these results suggest that DF decreases body weight gain, improves blood lipid metabolism, and reduces liver weight and hepatic lipid accumulation, contributing to the improvement of nonalcoholic fatty liver disease. In addition, these effects were more effective in DF+GSH combination group than in DF-only group.

• Herbal Formula Science
• /
• v.22 no.1
• /
• pp.113-122
• /
• 2014

Objectives : This study investigated the improvement effects of Pakistani (DF-a) and Chinese Ephedra herba-containing Gangjihwan (DF-b) on nonalcoholic fatty liver disease in a high fat diet-induced obese mouse model. Methods : Eight-week-old C57BL/6N mice were divided into five groups: a normal lean group given a standard diet, an obese control group given a high fat diet, and atorvastatin, DF-a, and DF-b groups given a high fat diet with atorvastatin (10 mg/kg), DF-a (80 mg/kg), and DF-b (80 mg/kg), respectively. After 8 weeks of treatment, body weight gain, blood lipid markers, ALT concentrations, liver weight and histology were examined. Results : 1. Body weight gain was significantly decreased in DF-a, DF-b, and atorvastatin groups compared with control. The extent of decreases was eminent in DF-a group. 2. Circulating concentrations of total cholesterol and LDL-cholesterol were significantly decreased in DF-a, DF-b, and atorvastatin groups compared with control. The decreases were most effective in atorvastatin group. 3. Liver weights were decreased in DF-a, DF-b, and atorvastatin groups compared with control. In particular, liver weight was significantly reduced in DF-b group. 4. Hepatic lipid accumulation was significantly decreased in DF-a, DF-b, and atorvastatin groups compared with control, and the magnitude of which was most effective in DF-b group. 5. Circulating ALT concentrations were decreased in DF-a, DF-b, and atorvastatin groups compared with control, but ALS levels were significantly reduced only in DF-b group. Conclusions : In conclusion, these results suggest that DF-a and DF-b decrease body weight gain, improve blood lipid metabolism, and reduce liver weight and hepatic lipid accumulation, contributing to the improvement of nonalcoholic fatty liver disease. In addition, these effects were similar between Pakistani and Chinese Ephedra herba-containing Gangjihwan.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.2
• /
• pp.177-182
• /
• 1999

Objectives: To reexamine the association between air pollution and daily mortality in Seoul, Korea using a method of meta-analysis with the data filed for 1991 through 1995. Methods: A separate Poisson regression analysis on each district within the metropolitan area of Seoul was conducted to regress daily death counts on levels of each ambient air pollutant, such as total suspended particulates (TSP), sulfur dioxide $(SO_2)$, and ozone $(O_3)$, controlling for variability in the weather condition. We calculated a weighted mean as a meta-analysis summary of the estimates and its standard error. Results: We found that the p value from each pollutant model to test the homogeneity assumption was small (p<0.01) because of the large disparity among district-specific estimates. Therefore, all results reported here were estimated from the random effect model. Using the weighted mean that we calculated, the mortality at a $100{\mu}g/m^3$ increment in a 3-day moving average of TSP levels was 1.034 (95% Cl 1.009-1.059). The mortality was estimated to increase 6% (95% Cl 3-10%) and 3% (95% Cl 0-6%) with each 50 ppb increase for 9-day moving average of SO2 and 1-hr maximum O3, respectively. Conclusions: Like most of air pollution epidemiologic studies, this meta-analysis cannot avoid fleeing from measurement misclassification since no personal measurement was taken. However, we can expect that a measurement bias be reduced in a district-specific estimate since a monitoring station is hefter representative cf air quality of the matched district. The similar results to those from the previous studios indicated existence of health effect of air pollution at current levels in many industrialized countries, including Korea.

• Asia pacific journal of information systems
• /
• v.22 no.2
• /
• pp.21-38
• /
• 2012

Until recently, successful implementation of ERP systems has been a popular topic among ERP researchers, who have attempted to identify its various contributing factors. None of these efforts, however, explicitly recognize the need to identify disparities that can exist between organizational information requirements and ERP systems. Since ERP systems are in fact "packages" -that is, software programs developed by independent software vendors for sale to organizations that use them-they are designed to meet the general needs of numerous organizations, rather than the unique needs of a particular organization, as is the case with custom-developed software. By adopting standard packages, organizations can substantially reduce many of the potential implementation risks commonly associated with custom-developed software. However, it is also true that the nature of the package itself could be a risk factor as the features and functions of the ERP systems may not completely comply with a particular organization's informational requirements. In this study, based on the organizational memory mismatch perspective that was derived from organizational memory theory and cognitive dissonance theory, we define the nature of disparities, which we call "mismatches," and propose that the mismatch between organizational information requirements and ERP systems is one of the primary determinants in the successful implementation of ERP systems. Furthermore, we suggest that customization efforts as a coping strategy for mismatches can play a significant role in increasing the possibilities of success. In order to examine the contention we propose in this study, we employed a survey-based field study of ERP project team members, resulting in a total of 77 responses. The results of this study show that, as anticipated from the organizational memory mismatch perspective, the mismatch between organizational information requirements and ERP systems makes a significantly negative impact on the implementation success of ERP systems. This finding confirms our hypothesis that the more mismatch there is, the more difficult successful ERP implementation is, and thus requires more attention to be drawn to mismatch as a major failure source in ERP implementation. This study also found that as a coping strategy on mismatch, the effects of customization are significant. In other words, utilizing the appropriate customization method could lead to the implementation success of ERP systems. This is somewhat interesting because it runs counter to the argument of some literature and ERP vendors that minimized customization (or even the lack thereof) is required for successful ERP implementation. In many ERP projects, there is a tendency among ERP developers to adopt default ERP functions without any customization, adhering to the slogan of "the introduction of best practices." However, this study asserts that we cannot expect successful implementation if we don't attempt to customize ERP systems when mismatches exist. For a more detailed analysis, we identified three types of mismatches-Non-ERP, Non-Procedure, and Hybrid. Among these, only Non-ERP mismatches (a situation in which ERP systems cannot support the existing information needs that are currently fulfilled) were found to have a direct influence on the implementation of ERP systems. Neither Non-Procedure nor Hybrid mismatches were found to have significant impact in the ERP context. These findings provide meaningful insights since they could serve as the basis for discussing how the ERP implementation process should be defined and what activities should be included in the implementation process. They show that ERP developers may not want to include organizational (or business processes) changes in the implementation process, suggesting that doing so could lead to failed implementation. And in fact, this suggestion eventually turned out to be true when we found that the application of process customization led to higher possibilities of failure. From these discussions, we are convinced that Non-ERP is the only type of mismatch we need to focus on during the implementation process, implying that organizational changes must be made before, rather than during, the implementation process. Finally, this study found that among the various customization approaches, bolt-on development methods in particular seemed to have significantly positive effects. Interestingly again, this finding is not in the same line of thought as that of the vendors in the ERP industry. The vendors' recommendations are to apply as many best practices as possible, thereby resulting in the minimization of customization and utilization of bolt-on development methods. They particularly advise against changing the source code and rather recommend employing, when necessary, the method of programming additional software code using the computer language of the vendor. As previously stated, however, our study found active customization, especially bolt-on development methods, to have positive effects on ERP, and found source code changes in particular to have the most significant effects. Moreover, our study found programming additional software to be ineffective, suggesting there is much difference between ERP developers and vendors in viewpoints and strategies toward ERP customization. In summary, mismatches are inherent in the ERP implementation context and play an important role in determining its success. Considering the significance of mismatches, this study proposes a new model for successful ERP implementation, developed from the organizational memory mismatch perspective, and provides many insights by empirically confirming the model's usefulness.

• The KIPS Transactions:PartD
• /
• v.14D no.6
• /
• pp.573-584
• /
• 2007

As multimedia information recently increases fast, various types of retrieval of multimedia data are becoming issues of great importance. For the efficient multimedia data processing, semantics based retrieval techniques are required that can extract the meaning contents of multimedia data. Existing retrieval methods of multimedia data are annotation-based retrieval, feature-based retrieval and annotation and feature integration based retrieval. These systems take annotator a lot of efforts and time and we should perform complicated calculation for feature extraction. In addition. created data have shortcomings that we should go through static search that do not change. Also, user-friendly and semantic searching techniques are not supported. This paper proposes to develop S-MARS(Semantic Metadata-based Multimedia Annotation and Retrieval System) which can represent and extract multimedia data efficiently using MPEG-7. The system provides a graphical user interface for annotating, searching, and browsing multimedia data. It is implemented on the basis of the semantic metadata model to represent multimedia information. The semantic metadata about multimedia data is organized on the basis of multimedia description schema using XML schema that basically comply with the MPEG-7 standard. In conclusion. the proposed scheme can be easily implemented on any multimedia platforms supporting XML technology. It can be utilized to enable efficient semantic metadata sharing between systems, and it will contribute to improving the retrieval correctness and the user's satisfaction on embedding based multimedia retrieval algorithm method.

• Journal of Korean Society of Transportation
• /
• v.35 no.4
• /
• pp.360-373
• /
• 2017

The BTO-a projects is the types, which has a demand risk among the type of PPP projects in Korea. When demand risk is realized, private investor encounters financial difficulties due to lower revenue than its expectation and the government may also have a problem in stable infrastructure operation. In this regards, the government has applied various risk sharing policies in response to demand risk. However, the amount of government's risk sharing is the government's contingent liabilities as a result of demand uncertainty, and it fails to be quantified by the conventional NPV method of expressing in the text of the concession agreement. The purpose of this study is to estimate the value of investment risk sharing by the government considering the demand risk in the profit sharing system (BTO-a) introduced in 2015 as one of the demand risk sharing policy. The investment risk sharing will take the form of options in finance. Private investors have the right to claim subsidies from the government when their revenue declines, while the government has the obligation to pay subsidies under certain conditions. In this study, we have established a methodology for estimating the value of investment risk sharing by using the Black - Scholes option pricing model and examined the appropriateness of the results through case studies. As a result of the analysis, the value of investment risk sharing is estimated to be 12 billion won, which is about 4% of the investment cost of the private investment. In other words, it can be seen that the government will invest 12 billion won in financial support by sharing the investment risk. The option value when assuming the traffic volume risk as a random variable from the case studies is derived as an average of 12.2 billion won and a standard deviation of 3.67 billion won. As a result of the cumulative distribution, the option value of the 90% probability interval will be determined within the range of 6.9 to 18.8 billion won. The method proposed in this study is expected to help government and private investors understand the better risk analysis and economic value of better for investment risk sharing under the uncertainty of future demand.

• Journal of Distribution Research
• /
• v.17 no.3
• /
• pp.115-132
• /
• 2012

This study empirically examines the impact of SSM market entry on changes in market shares among retailing types. The data is monthly time-series data spanning over the period from January 2000 to December 2010, and the effect of SSM market entry on market shares of retailing types is analyzed by utilizing several key factors such as the number of new SSM monthly entrants, total number of SSMs, the proportion of new SSM entrant that is smaller than $165m^2$ to total new SSM entrants. According to the Korean Standard Industrial Classification codes, the retailing type is classified into 5 groups: department stores, retail sale in other non-specialized large stores(big marts), supermarkets, convenience stores, and retail sale in other non-specialized stores with food or beverages predominating (others). The market shares of retailing types are calculated by the ratio of each retailing type monthly sales to total monthly retailing sales in which total retailing sales is the sum of each retailing type sales. The empirical model controls for the size effects with the number of monthly employees for each retailing type and the macroeconomic effects with M2. The empirical model employed in this study is as follows; $$MS_i=f(NewSSM,\;CumSSM,\;employ_i,\;under165,\;M2)$$ where $MS_i$ is the market share of each retailing type (department stores, big marts), supermarkets, convenience stores, and others), NewSSM is the number of new SSM monthly entrants, CumSSM is total number of SSMs, $employ_i$ is the number of monthly employees for each retailing type, and under165 is the proportion of new SSM entrant that is smaller than $165m^2$ to total new SSM entrants. The correlation among these variables are reported in