• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.6
• /
• pp.723-730
• /
• 2018

A well-designed flight vibration specification enables the optimum weight design of the Surface-to-Air or Air-to-Air Missile, improves the maneuverability of the flight vehicle, improves the engagement of target, and increases the price competitiveness of the components and the missile system. Conventional flight vibration specifications are used by using a somewhat higher standard as suggested in MIL-STD-810C, or based on accumulated data from developed similar missile systems. In this study, we confirmed the validity of FEA response analysis by comparing response data obtained by FEA and response data of real product. Also we proposed that each specification that reflects the structural characteristics of the place where the components are mounted is required instead of verifying all the components by a single flight vibration specification.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.2
• /
• pp.23-32
• /
• 2010

WiBro(Wireless Broadband), the service based on IEEE 802.16e(mobile WiMAX) standard, is a wireless broadband Internet technology being developed by the domestic telecommunication industry. In this paper, we analyze security vulnerabilities of WiBro focusing on initial authentication phase and propose a specification-based intrusion detection system that can detect those vulnerabilities. We first derive a specification from the normally operational process of the initial authentication based on PKMv2 EAP-AKA and formalize the derived specification as a state transition diagram. Proposed system executes the intrusion detection based on those specification and state transition diagram. In this paper, to verify the detection capability of proposed system, we construct a test bed network and execute scenario-based test.

• Journal of the Korea Institute of Building Construction
• /
• v.7 no.2 s.24
• /
• pp.67-76
• /
• 2007

The purpose of this study is to propose the efficient improvement in the lawsuit to request the guarantee against defect. This study points out several problems about related act and subordinate statue and judgement by analyzing the character of contract in apartment house, related laws and regulations, appraisals and judicial decisions. This study deduces the necessity of the establishment of the specification and the breakdown cost for repair and maintenance work to provide the standard for the detached judgement.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.05a
• /
• pp.714-717
• /
• 2004

In this paper, we describe issues related to standardized interaction among companies that are in the environments of heterogeneous information systems. The interaction method is detailed based on BPEL4WS, which is XML based standard specification. This paper provides method of interoperability using web service, which is considered a new information system paradigm. The method has importance in that it enables to exchange data in a platform independent manner. This paper deals with a method of interaction among heterogeneous information system based on BPEL4WS standard. The concepts of interoperability, XML, and workflow are introduced. The standards and previous research results related to interoperability are also provided. It describes brief introduction of BPEL4WS specification and its technical details. Integrated business process using BPEL4WS and interoperability issues are also included..

• IE interfaces
• /
• v.16 no.2
• /
• pp.156-166
• /
• 2003

Proposed in this paper is a standard-compliant business process modeling tool which is based on the UML(Unified Modeling Language) activity diagram and produces an XPDL(XML Process Definition Language) file as an output. The XPDL is a standard process definition exchange format by WfMC (Workflow Management Coalition). To develop an UML/XPDL-based modeling tool, the mapping of modeling elements between activity diagram and XPDL format is conducted after the detailed analysis of each modeling specification. As a result of this mapping, it is revealed that modeling elements of each activity diagram and XPDL must be expanded. So new modeling elements are identified and added to each specification. Based on this mapping, the prototype system is developed, and the usefulness of the developed system is shown through the case study.

• Journal of Welding and Joining
• /
• v.18 no.3
• /
• pp.68-75
• /
• 2000

The incomplete penetration(IP) discontinuity in butt joint weld, which is detected during safety analysis of the steel bridge by nondestructive evaluation(NDE) method, is classified as unacceptable defect according to the NDE codes and standards. In fact, there are a little allowance in butt joint weld in the view point of design criterion, and also detected IP discontinuity should be classified and evaluated for the fatigue strength and residual life estimation. In this study, we performed fatigue test to evaluate the fatigue strength of high strength steel(SWS490A) containing IP discontinuities in various size, the results compared and classified according to the bridge construction standard specification which published by korea administration of construction and traffic. Experimental results could be used to evaluate and estimate the IP discontinuities considering different stress range in butt joint bridge weld during periodic safety inspection.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.113-125
• /
• 2004

Active networks aim to provide a software framework that enables active network applications to customize the processing their communications. Active security component architecture focuses on the support of reuse system by active security component. The architecture is standard layer to acquire, understand, and assemble component, and it has to support a guideline for component identification, search and customization. In this paper we present the active security architecture as a standard model of discrete active network solution, and we propose the method for component classification and specification.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.131-132
• /
• 2019

In the Public Notice No. 2019-15 of the Ministry of Employment and Labor, the safety net and regulations on them have been deleted. The performance criterion of the debris net, which also functions as a horizontal safety net in the regulations on the criteria of occupational safety and health, is unclear. When installing a debris net that also functions as a horizontal safety net, a net that meets the performance criteria of KS F 8082 must be installed in accordance with KOSHA C-31-2017. The Korean Standard Specification for Construction Works, which specifies debris net and horizontal safety net, should be revised as soon as possible.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.525-532
• /
• 2003

The mission of tilting train development project is enhancing the speed of transportation of railway passenger using existing infrastructure. The threat of this project is the tilting technology is newly incorporated to this project. To overcome the threat this project incorporate systems engineering technology to development tilting train system. The systems engineering process, which was used in this project, was performed in accordance with systems engineering standard EIA632. This paper shows the systems engineering technology which was used to develop the tilting train system specification. This paper also shows the requirement template which was developed to communicate and synthesis various specialty engineering.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.127-128
• /
• 2023

Recently, OSC (off-site construction) construction has been revitalized as a response to the decline in building quality and productivity due to lack of skilled manpower at construction sites, and PC (precast concrete) construction, a representative OSC construction, is insufficiently applied to public housing.This is the situation.In addition, in the case of general contents appearing in standard specifications, the construction standards for quality assurance remain in the 1990s and do not correspond to the current construction environment.In order to improve the quality of PC member joints, we compared and analyzed Korean and Japanese specifications to establish appropriate standards for PC construction quality control, focusing on the quality of grout used in joints.