• Journal of Korean Association for Spatial Structures
• /
• v.16 no.4
• /
• pp.59-66
• /
• 2016

Recently damage of structures and loss of life by terrorism are internationally increasing. Among these terror that have a possibility to can happen in korea and that can caused lot of human life loss is the vehicle terror. To prevent the vehicle terror, the anti-ram barriers are needed. But domestic standard about anti-ram barriers are not clear. So, in this study, we will utilize and analyze the vehicle impact to evaluate the efficiency of the domestic bollard and suggest the installation standard of those. In Korea, granite, elastic, steel and stainless bollard are used. The performance of those bollard is not available. Elastic bollard couldn't stop the vehicle, and the others just could stop the vehicle only at the speed under 10kph. Therefore, set the variable to reinforce, and evaluate the defence efficiency of bollard. As a result, granite and elastic bollard was not suitable for the anti-ram barriers. Performance of steel bollard increased as thickness grew. So steel bollard should must be thicker than 10T. And the concrete compressive strength effected insignificantly on the defence efficiency, so more than 24MPa compressive concrete be used. Performance of stainless bollard increased as thickness grew. So stainless bollard should must be thicker than 13T.

• Ocean and Polar Research
• /
• v.37 no.4
• /
• pp.249-263
• /
• 2015

Standardization work for the ocean data produced by a variety of national oceanographic research projects was conducted in order to establish a national ocean data sharing system. For this work, we first prepared standard proposals for the national research ocean data by reviewing and analyzing of existing international and domestic ocean-data standards. The proposed standards were reviewed and revised by experts in the field of oceanography and academic societies for documentation. The 125-page technical report on the standards of 25 data items was prepared as an output of this research work, which is available free of charge for the public and interested parties. This paper explains the proposed standards of metadata and codes regarding the common properties of all the oceanographic data items. Especially, the standards for the metadata, codes and data formats of 4 physical data items were described in detail. In order to be adopted as the national standards for ocean data, however, the standards suggested here require further development and/or modification based on additional reviews of and ample feedbacks from the relevant academic and technical communities.

• International Journal of Contents
• /
• v.6 no.1
• /
• pp.26-34
• /
• 2010

This paper is on the premise that we need objective and measurable researches on quality evaluation of serious game for users' correct selection of games fitting for their purposes, for development of competitive high-quality game, and for stable growth of game industry. At first, we looked into various characteristics of serious game, read the present situation of game market, and proposed the necessity of quality evaluating model for serious game. To guarantee the objectivity of the proposed models, we compared and analyzed various proposals of standard model on the basis of international standard quality-evaluating model, ISO/IEC 9126 S/W. And so we extracted quality-evaluating items for serious game that composed of 8 evaluating areas and 25 sub-attributes, and presented quality-evaluating indices of each area. The proposed quality-evaluating model was added 2 areas and 8 sub-attributes to the international standard model, and the validity of the extracted items' was verified by expert group's questionnaire. Accordingly, we expect that this paper will increase game users' satisfaction, promote the development of high-quality games, and contribute to continuous growth in serious game market.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.3
• /
• pp.155-162
• /
• 2002

The Ministry of Construction-Transportation released a plan about EVMS in 1993 in order to prepare measures for an efficient public construction project, and prepared an enforcement proposal concretely in June for 2000 years, and have enforce a public project by an example with a target. Therefore, accurate analysis and evaluation about field progress are required for efficient management of a building construction, and must be established building construction management system for fast action about a problem However, unified management cannot be consisting because a work progress system is different from details estimate system within a country. and There is not still a definite standard in progress measurement for an application of EVMS. A purpose of this study is to present an improvement about a problem of progress measurement for an application of EVMS. The contents of a study, inquired into a progress measurement method and a standard to use in the field of a public construction and private construction and Checks a problem and presented an improvement item necessary for and is as follows. $\circled1$ must establishes a control account and progress measurement standard. $\circled2$ must manage progress in a activity viewpoint. $\circled3$ must use an accurate CPM process management technique.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.3
• /
• pp.147-154
• /
• 2002

The Korean government makes an effort to raise the competitive power of nation through CM activation in the construction industry. Since the first CM service was applied to the atomic power plant project in 1986, the number of CM contracts are continuously being increased and will be up to 20% by 2002 in public sector. However, the public projects had been executed without any procedure manual or standard guideline of CM services. Meanwhile the Ministry of Construction and Transportation issued $\ulcorner$CM Service Guide$\lrcorner$, but the guide shows an indefinite description in the responsibility, authority and scope of activity for the project participants. Therefore, it is required the procedures be improved and scope of activities be established for the project participants. This study was generated from the comparative analysis of $\ulcorner$Standard CM Services and Practice$\lrcorner$ Published by CMAA and domestic $\ulcorner$CM Service Guide$\lrcorner$ and the case of Incheon International Airport construction. The purpose of this study is to provide the fundamental data for an improvement in the procedures of project execution and the construction manager's activities/rolls shown on $\ulcorner$CM Service Guide$\lrcorner$

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.128-136
• /
• 2010

In according with concrete structural design standard, it is common designing flexure reinforcement concrete to induce tension failure. So reinforcing ratio is limited to inducing tension failure. And maximum reinforcing ratio is regulated to protecting concrete compression strength caused by over reinforced building. Minimum reinforcing ratio is also limited in designing standard to protecting brittle failure as extremely using less reinforcing bar. But in minimum reinforcing ratio it is extremely conservative or it is sometimes impossible to induce stable tension-failure because they are depending on yield failure and experienced method and concrete designing standard strength. Therefore the purpose of the present paper is to evaluate the flexural behavior of minimum steel ratio of reinforced concrete of beams and to propose the guide-line of equation of minimum steel ratio by performing static flexural test of 16 beams according to size effect, number of steel, yielding stress of steel, and concrete compressive strength which are presumed effective variables. From experimental results, the equation of minimum steel ratio was newly proposed considered size effect.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.221-222
• /
• 2017

An analysis of the current water leak status of understand structure (underground parking lots, staircases, plumbing systems, water reservoirs, etc.) of multi-family housing in South Korea shows that water leaks are found from cracks in all areas of the underground structure caused by the degradation environment (water pressure by underground water, humidity, temperature, earth pressure, soil behaviour and vibration, etc.), which result in various problems, including mold, malodour, debonding of finishing materials, exfoliation, breakout, water leaks in electrical boxes, efflorescence, sedimentation of calcium hydroxide, decoloration, rusting, damages and pollution among others. Therefore, this study aims to analyse the current status of water leaks in underground structure and use the results as the basic data for developing a standard guideline for water leaks and maintenance by parts of the underground structure of multi-family housing.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.143-147
• /
• 2009

Graduates from engineering colleges are demanded to have been acquired some abilities and qualities during their undergraduate years through the standard of the so-called "programmed learning results and evaluation" This paper aims at analyzing the learning results evaluation tool for graduates from the architectural engineering department through the examples of the colleges with engineering accreditation in Korea, and suggesting a more appropriate programmed learning result evaluation tool. The basic theories on programmed learning results were studied, and then the previous study examples were researched. The study objects were limited to the fourteen colleges which offered the examples of the learning results evaluation tools of the colleges with engineering accreditation in Korea. Types and the present situation of those evaluation tools were analyzed. In addition, the proposals for the evaluation tool of programmed learning results and the performance standard were suggested for those with an engineering accreditation, based on the case study of the performance standards of each college with an engineering accreditation. The study results showed that much more national research needs to be conducted to clarify the standards of selecting an evaluation tool and a performance standard appropriate for the level of each college so that it can make a proper proposal.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.6
• /
• pp.14-21
• /
• 2011

A unit modular system is a construction method which installs on site by manufacturing 50%~90% of the whole process in the factory. This method can minimize the process in the site and maximize the operation, which will reduce the duration and improve the overall quality. The recent paradigm of construction is to be sustainable building. Modular system can be regarded as a sustainable building construction method because it can reduce the amount of construction waste by recycling partial or whole part of overdue building be torn down. A unit modular system is the answer to cope with the increasing market of small size housings. A unit modular system is the most appropriate option at this point. This research proposes the standard operation and construction process of modular system, which enable to optimal system. A case study of reconstructing small-size housing was introduced to support this proposal. Finished unit modular is the reasonable way. However, 80% of complication rate of the modular is the most rational when a defect occurrence during delivery is considered.

• The Journal of Korean Medicine
• /
• v.41 no.3
• /
• pp.66-80
• /
• 2020

Objectives: We investigated the current status of the consent form for bee-venom pharmacopuncture therapy, which is using in Korean medicine hospitals. We suggest the development of a standard informed consent form. Method: Through the questionnaire survey, status of using informed consent form was identified at 24 Korean medicine hospitals. We analyze different types of informed consent form, which was developed by each hospitals. We investigated the types of informed consent forms for various medical procedures through electronic searches. A standard informed consent form for bee-venom pharmacopuncture therapy was developed based on the medical law and the standard informed consent form for medical procedures developed by Korea Fair Trade Mediation Agency. Result: In our survey, 65% of the hospitals do not use consent well, only 35% of the hospitals use informed consent form, and the most hospitals use self-developed informed consent form. As a result of analyzing the contents of informed consent form used in each hospitals, the explanation of diagnosis, treatment precautions, suggestions for other treatments, consequences of not performing the scheduled procedure, possibility of treatment change was insufficient. 48% of hospitals manage consent in recording on a chart, 39% in scanned documents, and 13% in digital electronic consent form. Conclusion: A standard informed consent form for Bee-venom pharmacopuncture therapy include diagnosis, effectivness, necessity, indications, method, skin reaction test, hypersensitivity questionnaire, treatment precautions, possible hypersensitivity reactions and countermeasures, suggestions for other treatments, consequences of not performing the scheduled procedure, possibility of treatment change and the name of doctor.