DOI QR코드

DOI QR Code

Performance Evaluation and Proposal on Standard Establishment of the Bollard Through Impact Analysis

충돌해석을 통한 볼라드의 성능평가 및 설치기준 제안

  • Received : 2016.11.03
  • Accepted : 2016.11.22
  • Published : 2016.12.15

Abstract

Recently damage of structures and loss of life by terrorism are internationally increasing. Among these terror that have a possibility to can happen in korea and that can caused lot of human life loss is the vehicle terror. To prevent the vehicle terror, the anti-ram barriers are needed. But domestic standard about anti-ram barriers are not clear. So, in this study, we will utilize and analyze the vehicle impact to evaluate the efficiency of the domestic bollard and suggest the installation standard of those. In Korea, granite, elastic, steel and stainless bollard are used. The performance of those bollard is not available. Elastic bollard couldn't stop the vehicle, and the others just could stop the vehicle only at the speed under 10kph. Therefore, set the variable to reinforce, and evaluate the defence efficiency of bollard. As a result, granite and elastic bollard was not suitable for the anti-ram barriers. Performance of steel bollard increased as thickness grew. So steel bollard should must be thicker than 10T. And the concrete compressive strength effected insignificantly on the defence efficiency, so more than 24MPa compressive concrete be used. Performance of stainless bollard increased as thickness grew. So stainless bollard should must be thicker than 13T.

Keywords

References

  1. The Federal Emergency Management Agency(FEMA), "FEMA 430 : site and urban design for security.", U.S.A., 2007
  2. "National Highway Traffic Safety Administration(NHTSA).", www.nhtsa.gov
  3. Unified Facilities Criteria(UFC), "UFC 4- 022-02 : selection and application of vehicle barriers.", U.S.A., 2010
  4. "교통약자의 이동편의 증진법 시행규칙 제 6 항.", 국토교통부령 제 120호, 2014년 8월 7일
  5. Y. H. Kim, "Compressive Fatigue Loading Test and P-wave Velocity Change Characteristics in Granite Stone Samples", Korea Society of Engineering Gelolgy, 1997, pp.17-18
  6. Erik Soderstrom, "Characterisation and Modelling of Mechanical Properties for Granite and Diabase.", Master of Science in Engineering Technology Mechanical Engineering, 2016
  7. Y. Zhou, J. Zhao, "Advances in Rock Dynamics and Applications.", CRC Press, 2011
  8. Majid Shahzad, "Mechanical Characterization and FE Modelling of a Hyperelastic Material.", Institute of Space Technology, 2015
  9. S. K. TAY, "Crash Impact Modelling Of Security Bollard.", 12th International LSDYNA Users Conference, 2012, pp.1-10
  10. YE Liyan, "Numerical simulation and experimental study of 304 metastable austenitic stainless steel in cup drawing", National Engineering Research Center of Die&Mold CAD, 2003
  11. American Society for Testing and Materials (ASTM), "ASTM F 2656-07 : Standard Test Method for Vehicle Crash Testing of Perimeter Barriers.", U.S.A., ASTM international, 2007