• The KIPS Transactions:PartC
• /
• v.11C no.4
• /
• pp.545-554
• /
• 2004

WebDAV is a protocol to support collaboration among the workers in geographically distant locations through the Internet. WebDAV extends the web communication protocol HTTP/1.1 to provide a standard infrastructure for supporting asynchronous collaboration for various contents across the Internet. To provide the WebDAV functionality in legacy applications such as web-based collaborative systems or document management systems, those systems need to be implemented additionally to handle the WebDAV methods and headers information. In this paper, we developed an Apache-based WebDAV server, named DAVinci(WebDAV Is New Collaborative web-authoring Innovation)which supports the WebDAV specification. DAVinci was implemented as a form of service provider on a mod_dav Apache module. Mod_day, which is an Apache module, is an open source module to provide WebDAV capabilities in an Apache web server. We used a file system for storing resources and the PostgreSQL database for their properties. In addition, the system provides a consistency manager to guarantee that both resources and properties are maintained without inconsistency between resources and their properties.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.8
• /
• pp.744-751
• /
• 2004

This paper presents the implementation of the low cost and high speed RF ATE(Automatic Test Equipment) system, which can be a reasonable solution for reducing the test cost of RF devices. This paper suggests high speed and precise measurement capabilities which are realized by the 16 independent RF ports with high speed switching time and high accuracy digitizer using the industry standard Versus module eXtensions for Instrument(VXI) General Purpose Interface Bus(GPIB) interfaces. Also, the system has the capabilities of quad-site test which can dramatically increase the device throughput. This paper concludes with the demonstration of the implemented ATE system through the setup of RF Power Amplifier Module(PAM), which is under the most competitive market situation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.66-74
• /
• 2002

OFDM(Orthogonal Frequency Division Multiplexing)is a one of the nst promising digital modulation techniques adapted for Digital audio broadcasting or Digital TV since it is very robust against multipath fading channels. From 1997, since the OFDM technique was considered as the physical layer standard for the high data rate wireless LAN systems in the 5㎓ band, related studies have been studied actively. The key element to implement high data rate wireless LAN system using OFDM technique are IFFT and FFT modules. In this paper, new IFFT and FFT module are designed and implemented using current cut circuit based on the matrix-rounding process for the low-power consumptive operation and high-speed data processing. In addition to, we certify the available operation of the rounded IFFT/FFT module in the AWGN channel by using the BER performance simulation of IEEE 802.11TGa based OFDM modem with rounded IFFT/FFT module.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.881-889
• /
• 2004

Using the ETC Service, it is now possible to charge a vehicle for driving pass a specific toll booth electronically, without the vehicle even having to slow down. The smart card and card reader used to collect tolls electronically have a serious problem which it dose not have a standard for the ETC system. In this paper, we suggest the ETC system using mobile phone to collect tolls efficiently instead of existing system which is consist of a Interface Module to connect between a mobile phone and OEE, a mobile phone to send the information of tollgate fees and OEE to communication with RSE of roadway in the vehicle. This primary focus of this system is the IM functions and protocol to assist of the existing mobile phone and OBE.

• Journal of IKEEE
• /
• v.21 no.2
• /
• pp.158-161
• /
• 2017

In this paper, we propose Total RMS(Radiation Monitoring System) for nuclear and nuclear medicine. The proposed system can expand and control Stack Monitor, Area Monitor, and Water(Liquid) Monitor into one system, and can monitor the signals measured by each radiation detector in an integrated manner. The proposed system consists of a sensor module that detects the radiation, a display unit that displays the radiation dose near the radiation detection location, an alarm unit that reports the alarm when the detected radiation dose reaches the danger level, A Main Hub for collecting and storing the contents to the remote monitoring system, and an RMS Monitoring Unit for clearly displaying the measured radiation dose at the remote site. In order to evaluate the performance of Total RMS for the proposed nuclear and nuclear medicine field, it is confirmed that the measurement uncertainty is less than 8.5% and it operates normally within ${\pm}15%$ of the international standard.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.8A
• /
• pp.640-647
• /
• 2009

IEEE 802.11i is an amendment to the original IEEE 802.11/b,a,g standard specifying security mechanism by stipulating RSNA for tighter security. The RSNA uses TKIP(Temporal Key Integrity Protocol) and CCMP(Counter with CBC-MAC Protocol) instead of old-fashioned WEP(Wired Equivalent Privacy) for data encryption. This paper describes a design of a communication security engine for IEEE 802.11i MAC layer. The design includes WEP and TKIP modules based on the RC4 encryption algorithm, and CCMP module based on the AES encryption algorism. The WEP module suffices for compatibility with the IEEE 802.11 b,a,g MAC layer. The CCMP module has about 816.7Mbps throughput at 134MHz, hence it satisfies maximum 600Mbps data rate described in the IEEE 802.11n specifications. We propose a pipelined AES-CCMP cipher core architecture, which has lower hardware cost than existing AES cores, because CBC mode and CTR mode operate at the same time.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.41-48
• /
• 2010

It is essential to guarantee a smooth communication and data exchange in a PHD(Personal Healthcare Device) network for applications providing U-health services. In spite of that, most of PHDs are heterogeneous, so the heterogeneity of their protocols makes it difficult to develop an integrated gateway sending sensed healthcare data to U-health service providers. To solve this problem, we suggest the design and implementation of a device adapter model based on dynamic managed module in this paper. Our model were implemented to work on the OSGi-based gateway middleware and to have interoperability in connection with the HL7 system that is the standard of the Healthcare Information systems. In addition, our model has an architecture supporting a communication based on the object serialization in order to provide extensibility in the functional aspect of applications. Through the experiment on a test-bed which is an implementation of the device adapter module for electrocardiogram and blood-pressure/blood-sugar device having one channel, we have confirmed the accuracy of sensing and sending data.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.523-533
• /
• 2000

In this paper, we present the hardware implementation of a smart antenna test-bed for a real -time performance analysis of the beam-forming algorithm operating in a wide-band CDMA environments of the WLL(Wireless Local Loop) standard. The test-bed introduced in this paper includes an external PC and signal generating module as well as the beam-forming module in order to perform, analyze, and evaluate the performance of the proposed smart antenna system. In the beam-forming module, the optimal weight vector is provided by the modified CGM algorithm. The computed weight vector is transferred back to the external PC for the performance analysis based on the off-line processing. From our analysis obtained in the hardware of the test-bed, it is concluded that the proposed smart antenna system for the WLL system is appropriate for enhancing the communication quality and capacity tremendously at the cell-site of the CDMA environment.

• Journal of Korea Foundry Society
• /
• v.28 no.6
• /
• pp.256-260
• /
• 2008

The Hybrid-Lower Arm, which has been developed for reducing cost and weight, was produced by three kinds of casting methods such as the high-pressure diecasting(HPDC), the squeeze casting(SC), and the H-NCM rheocasting process. The important factors for development of the Hybrid-Lower Arm are the integral feeding in Al casting for heat treatment and the high joinning ratio between the steel part and the Al part. In this study, effects of these casting processes on the quality of Hybrid-Lower Arm were investigated. Compared with HPDC and squeeze casting, the rheocasitng process using the H-NCM slurry had some advantages in joinning different materials of Al and steel pipe without deforming the steel pipe. X-ray analysis also showed the poreless microstructure in semisolid Hybrid-Lower Arm. In the torsion stress test, semisolid Hybrid-Lower Arm was satisfied with the requirements of automobile standard.

• Spatial Information Research
• /
• v.19 no.6
• /
• pp.87-100
• /
• 2011

Recently, a variety of GML application schemas have been designed in many fields. GML application schemas are specific to the application domain of interest and specify object types using primitive object types defined in the GML standard. GML instance documents are created based on such GML application schemas. The GML instance documents generally require large volumes to represent huge amounts of geographic objects. Thus, it is essential to store such GML instance documents in relational database for efficient management and use. Relational database is relatively convenient to use and is widely applied in various fields. Furthermore, it is fundamentally more efficient than file structure to handle large datasets. Many researches on storing GML documents have been carried out so far. However, there are few studies on storage of GML instance documents. Therefore, in this study, we developed the storage module to store the GML instance documents in relational database.