• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.214-217
• /
• 2003

In this paper, we deal with implementing design for a correlator access code generator module which they are used for setting up a connection between units, a packet decision, a clock syncronization, by FPGA. The orrelator module which is composed of the Wallace Tree's CSA and threshold value decision device decides useful a packet and syncronizes a clock, after it correlates an input signal of 1 Mbps transmission rate by a sliding window. An access code generator module which is composed of a BCH (Bose-Chadhuri-Hocquenghem) cyclic encoder and control device was designed according as a four steps' generation process proposed in the bluetooth standard. The pseudo random sequence which solves syncronization problem saved a voluntary device Proposed the module was designed by VHDL. An simulation and test are inspected by Xilinx FPGA.

• Journal of the Korea Furniture Society
• /
• v.24 no.3
• /
• pp.247-256
• /
• 2013

A dormitory is the most important compound space to college students who have to live with others. Also, for the students living in the boarding area, the dorm space can be the space for learning, exchanges and cultural. These Housing environment is a public space, so this is based on Universal Design. However, the 1970s-built dormitory space for the current user is narrow and not right for furniture standard. In this study, in order to compensate for these problems, the design directions are based on the previous studies - Park, Young-Soon, 2008, 'A Proposal on Dormitory Furniture Design for University Students.' Based on the previous study, the type of variable design is designed for desks, bookcases, beds, wardrobes, and other cabinets as representative household types. Furthermore, these furnitures are assembled and transformed depend on the dormitory space for single, double and four students. The furniture assembly system and arrangement module are presented in the direction of three kinds of designs. Therefore, three meaning of this study are the development of design to be used each item, the realization of custom furniture for space and presenting variable design module.

• Journal of Korean Physical Therapy Science
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2006

This study was conducted to develop the PBL module using simulation(S-PBL), to apply it to the physical therapy curricula, and its effect on students; learning contents, learning process, and its overall impacts. The S-PBL module was apply on 47 students of first year physical therapy in Jeju Halla College for 8 weeks from 2005 Feb to April. The data was analyzed via SPSS 10.0; the evaluation of learning contents and process was divided into 5 areas; the learning impacts in 4 areas. The research sought average and standard deviations. The students; satisfaction regarding S-PBL learning contents and process averaged >3.5 (on the Likert Scale of 1 thru 5) which indicated high learning achievement. For the learning impact, using an S-PBL module, it averaged >2.8 (on the Likert Scale of 1 thru 4) which indicated high learning impact. Significantly, the students showed high satisfaction in the areas of clinical practicum, the learning process, the opportunity to participate in clinical affiliation, and motivation for acquiring professional knowledge. This study proved that the application of S-PBL is effective for the physical therapy students; ability to carry out physical therapy, and it is also worth to apply in the physical therapy curricula to improve the students; participation in clinical skills.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.4
• /
• pp.77-85
• /
• 2008

PDF is widely accepted as a standard document format and now it supports 3D contents as well. Within the engineering application areas, this new 3D feature may be used to support sharing of 3D documents and thus collaboration between engineering departments, suppliers and partners. In this paper, we describe a system that automatically generates formatted engineering documents including 3D data converted from 3D applications such as commercial 3D CAD viewer. The system consists of two major modules. One is U3D conversion module and the other is PDF conversion module. U3D conversion module extracts geometry, view data, assembly and disassembly information from 3D viewer and converts to U3D format, currently in IDTF text file format. PDF conversion module generates a PDF file and inserts U3D data, various annotation information, and scripts for custom generated operations such as assembly and disassembly in the PDF document.

• Journal of the Korean Society of Systems Engineering
• /
• v.1 no.1
• /
• pp.14-19
• /
• 2005

High temperature vacuum furnaces or high standard electric furnaces demand high technology level and high production cost. Therefore, an iterative design process and the optimization approach under integrated computing environment are required to reduce the development risk. Moreover, it also required to develop an integrated design software that can manage the centralized database system between factory and design department, and the automated furnace design and analysis. The developed software is dedicated to the development of the vacuum (electric) furnaces. Based on the distribute middleware system, the GUI module, the CAD module, the thermal analysis module and the optimization module are integrated. For the DBMS, Microsoft Access is employed, the GUI is developed using Visual Basic language, and AutoCAD is utilized for the configuration design. By investigating the analysis code interface, the analysis and optimization process, and the data communication method, the overall system architecture, the method to integrate the optimizer and ana lysis codes, and the method to manage the data flow are proposed and verified through the optimal furnace design.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.85-92
• /
• 2004

A design of a preceding instruction decoding module(PIDM) is proposed aiming at performance enhancement of JTAG-based test complying to the IEEE 1149.1 standard. The PIDM minimizes the number of clocks by performing test access port(TAP) instruction decoding process prior to the execution of TAP-controlled test activities. The scheme allows the generation of signals such as test mode select(TMS) inside of a target system. The design employing PIDM demonstrates 15% performance enhancement with simulation of a CORDIC processor and 48% reduction of the TAP-controller's circuit size with respect to the conventional design of a non-PIDM version.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.71-75
• /
• 2019

Solar energy is one of the renewable energy sources. It can respond to expanding energy demand. A solar cell module is designed to have a durability that can be developed over a long period of 25 years to be installed outdoors and perform like a stable power supply. We need Standard Test Condition (STC)-based power output data before and after testing to measure the power output of existing modules. The modules are shown to reduce power output by comparing data before and after outdoor experiments regardless of whether they are indoor or outdoor. It is easy to compare the power output quantities through the module simulator in the indoor. However, it takes a lot of testing time and costs to compare the power output on outdoor in the case of a high number of modules and distance from the module simulator. It can save time and costs if we can check the power output using the data in outdoor. We have used the long-term outdoor test to find the elements out that corresponds to the reductions in power output quantities. We have conducted research that matched the actual and the tests.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.129-143
• /
• 2003

Bsusiness-to- Business transactions requires interactions between diverse application s and business. This gives rise to the need to for a common standard and protocol for exchanging busienss messages. and RosettaNet is the leading industry organization focused on developing B2B process standard for a global supply chain. This paper is intended as an investigation of Build-up Method of SCM Connection applying EC Standard(Rossetta-net) to reduce the integration effort, and improve extensibility and interoperability of an eBusiness infrastructure.-Intiative way for E-commerce applications to quickly incorporate new standards. Supply Chain Management (SCM) helps companies plan and execute supply to meet customer demand. The researches of modem scientists have thrown new light on the subject. but, The study of SCM for EC Standard has been strangely neglected by critics. Consequently, existing SCM system, which require to introduce the functions of EC, needs to be changed. Let me summarize the main points that have been made in this paper. The sharing information for connection and the Rosetta-net standard of the existing SCM system, and PIP 3A4, order management module, of the Rosetta-net specifications for connection by the Rosetta-net. Lastly, That shows the process of the gateway for connecting among the existing SCM systems. This provides felxibility in incorporating any new emerging open standard.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.245-246
• /
• 2012

Lately the Infill Modular Construction System which meets the domestic standards about the structure and fireproof performance and which is applied to the remodeling techniques is being emphasized. In order to introduce the Infill Modular Construction System to domestic market successfully, the development of insufficient element technologies and systematic analysis of process should be preceded. This research aims to establish of Standard Construction Process, as advanced research for the settlement of the Infill Modular Construction System. As advanced research for the activation of the Infill Modular Construction System, this research aims to develop Infill Unit Module's mobile device. This is expected to improve work efficiency. In addition organizing optimized Standard Construction Process by steady work analysis and improvement is being planned.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.7
• /
• pp.9-16
• /
• 2017

In this paper, we propose a development method of portable Automatic Test Equipment based on PXIe platform. Legacy VME form factor structured test equipment has limited reuse and expansion of modules due to unapplied bus specification. In particular, these limitations can cause development periods and costs to increase, and the reliability of environmental conditions is lacking due to non-standard modules. The test equipment of the proposed PXIe platform can use diverse COTS modules to shorten the development period and minimize the instability between developments. The PXIe development module works with standard Xilinx FPGAs, PXIe Windows device drivers, and applications on standard PXIe buses. The use of standard bus and COTS modules increases scalability and reusability, enabling rapid development and excellent maintenance. Through the test, we show the proposed test equipments can be implemented efficiently between the development processes and proved their reliability through function tests and environmental tests.