• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.5716-5720
• /
• 2012

현재 산업체에서 그 수요가 늘어나고 있는 3차원 제품 모델과 관련하여 군에서의 3차원 모델 활성화 방안을 연구하였다. 우리 군은 전통적으로 기계분야 중심의 제조업이 활성화되어 있어 기본적으로 2차원 도면을 기반으로 한 제품 설계가 주를 이루고 있으며, 이에 관련 지침 또한 2차원 도면 형태의 자료에 대해서만 규정하고 있다. 따라서 본 연구에서는 '국방규격 서식 및 작성에 관한 지침'으로 대표되는 현재 우리 군에서의 기술자료 관리 지침을 분석하고, 제품의 수명주기관리(Product Lifecycle Management) 관점에서 우리 군에서의 3D 제품모델 활성화를 위한 방안을 모색하고자 하였다.

• 한국항해항만학회지
• /
• 제27권6호
• /
• pp.661-667
• /
• 2003

There are certain guidelines on the channel design such as domestic guidelines（Korean and japanese, etc.）and international guideline known as PIANC Rules（Permanent International Association of Navigation Congresses Rules）, in the world These rules have considered many factors such as natural conditions, ship maneuverability and geographical features etc. But it is contented toot the area of these rules toot are meant to facilitate the ease of ship-handling is insufficient. To satisfy this point in design process, it is necessary to take into account the difficulties encountered in ship-handling within these inland waterways. Because many vessels are navigating at the same time within these waterways, the specific navigable traffic volume should be considered with regard to the standard process of route designing. It must also be considered with regard to the volume of navigable traffic bemuse of ship-handling difficulty toot arises within the same waterway with varying amounts of traffic volume because toot ship-handling/manueverability is directly influenced by these factors. This paper aims to propose a new approach to the design of standard inland water route considering the traffic volume and the shape of waterway. Also consider the relationship among these factors may affect to the ship-handling difficulties.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 춘계학술대회
• /
• pp.19-29
• /
• 2013

Slips and falls are associated with many occupational injuries in Korea. It is also estimated that slipping are major contributors to slip, trip and fall injury burden. So "LOCAL RULE ON OCCUPATIONAL SAFETY AND HEALTH STANDAR D" must be improved, especially article 3(prevention of slip, trip and fall). The primary purpose of the present study is to determine if, and to what extent, the standard could be improved in present environment. In order to fulfill our objective, the another regulation in Korea and foreign countries were investigated and reviewed. Many kind of standard, mandatory documents and guideline were also reviewed. And then, regulations, standard, guideline etc. reviewed were compared with each others. The article 3 was revised as below. 1. The floors of the traffic route in workplace shall have no hole or slope, or be uneven or slippery so as, in each case, to expose employees to slip, trip and fall risk, except if adequate measures have been taken to prevent a employees falling. 2. The employer shall design, install and fix the drain for effective drainage if fluid contaminants were frequently occurred. So far as is reasonably practicable, An employer shall keep the workplace clean, sanitary, and dry so that employees won't have any risk to tripping or slipping at the workplace. 3. To facilitate cleaning, every floor, workplace, and passageway shall be, so far as is reasonably practicable, kept free from protruding objects, splinters, holes, etc. Also, some criteria was developed in this study. Standard and criteria developed in this study will help to prevent slip, trip, and fall injuries.

• 한국BIM학회 논문집
• /
• 제10권4호
• /
• pp.50-59
• /
• 2020

Recently, the government has actively promoted the introduction of BIM at the national level to improve the efficiency and productivity of the construction industry, and private interest in the application of BIM has also increased. However, despite the large amount of references and information, not much research has been done in quantitative ways to accurately measure the performance of BIM projects. The purpose of this study is to review performance measurement cases using ROI, investment effect analysis, and queue model analysis using domestic and overseas BIM guideline research and to present standard templates that can quantitatively measure BIM performance records according to domestic conditions based on this. Performance measurement trends and cases according to the application of BIM were analyzed, and nine quantification elements were derived from this, and based on this, a performance measurement data collection template at the BIM life cycle stage was prepared. Detailed items and contents were prepared for the nine quantification elements, and the final template consisted of a total of 43 questions, divided into the entire stage (15), the beginning (8), the middle (8), and the latter (12) areas. It is expected that by using the standard template of railway BIM performance records developed in this study, the BIM design stage will be diagnosed and the deficiencies will be supplemented, which will be the basic data for measuring actual quantitative performance in all life cycle performance of future BIM projects.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제22권3호
• /
• pp.7-15
• /
• 2016

Purpose: As medicare services have gotten spreaded, clinical laboratory has been dominant position. So, it has been acted for quality control and clinical pathology accreditation. But there has been quite deficient information to evaluate working space and technical standards of medical laboratory for accreditation. This study goals to figure out accreditation standard and design guideline for clinical laboratory, and to give safe and efficient design information. Methods: This study has been searched by literature for accreditation standards and design guidelines of clinical pathology in USA, UK, and Germany. Results: Three countries have accredited based on working lab space, staff space, storage space, patient space and health and safety equipment. Design guidelines of three countries commonly have focused on worktable layout, worktable distance and module, and specific laboratory biosafety level. And USA guidelines stress on the architectural design such as design process and passage distance for escape, UK stress on the efficiency as functional work flow and construction cost, lastly Germany design guidelines stress on the operator's safety distance and workstation. Three countries have not only accreditation standards but also design guidelines for more specific quality management, separating from accrediting institute. Implications: In korea, it has been needed to make clinical laboratory design guideline for the safe and efficient environment and reliable and competitive medical service.

• Journal of Acupuncture Research
• /
• 제27권1호
• /
• pp.75-86
• /
• 2010

Objectives : We developed and proposed a guideline for safety and performance assessment of electric moxibustion apparatus (class II medical device). Methods : We drafted the guideline for safety and performance assessment of electric moxibustion apparatus by referring the existing standards, guidelines and measurement data from commercially available products. Temperature characteristics such as maximum temperature and ramp time, and physical characteristics such as weight, noise and diameter were measured. User friendliness was also evaluated for commercial devices. Results : This guideline only can be applied to the electric moxibustion apparatus where moxa is being heated by electricity for medical proposes. Maximum temperature of higher than $50^{\circ}C$ can be achieved mostly. Ramp rate of temperature seems to be reliable. Control of temperature is needed to be improved. Moxa and its derivative products seem to be regulated for reliable temperature performance for clinical application. Requirements for design and development of electric moxibustion apparatus are suggested : temperature indicator, temperature control and its accuracy, safety measure, surge protection, user friendliness and instruction for use (IFU). Design recommendation of the reduction of noise level and energy loss are suggested for better products. Conclusions : We proposed a guideline for safety and performance assessment of electric moxibustion apparatus to improve the quality of relating products and aid their commercialization by aiming higher industrial competitiveness of the medical device sectors in Korea. Discussion with related institutes such as industry, academy and government is further required. Public hearings also need to be held prior to the establishment of a final guideline and standard.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제26권2호
• /
• pp.39-47
• /
• 2020

Purpose: Clinical laboratory of hospital has been demanded to extension or relocation regarding with the test number increase and analyzer development. Space area criteria per test numbers, lab functions, hospital bed and lab staffs are needed for draft space programing. So, the purpose of this study is to provide the space area guideline of clinical laboratory for space calculation in planning and design the spatial environment. Methods: Literature review has been used in checking the standards and guidelines. And questionnaire surveys to laboratory supervisors in hospitals have been conducted for the data collection. 60 answers have been analysed statistically by MS Excel program. Results: The result of this study can be summarized into three way calculations. The first one shows that the basic standard workspace and distance is applied in lab design. The second one shows that average space area criteria resulted from case studies is applied by 19㎡ per one staff, 0.9~1.0㎡ per one bed, and lastly linear length calculation of workbenches and analyzers on the bench top and floor mount, is multiplying it by the sum of the counter depth plus aisle width. Implications: In updating the space area calculation guidelines, it is necessary to cooperate with medical staffs and designers.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2008년도 춘계학술발표대회 논문집
• /
• pp.410-420
• /
• 2008

The progress of industrialization in Korea has led to increase social participation by females and also a transition toward a nuclear family based system. As a result of it, Korea is nowadays confronted with the issue of childcare, which is emerging as a social problem. In Japan, both combined nurturing facilities and the exclusively dedicated facilities for disabled children are institutionally maintained on a consistent basis. In addition, the enactment of the Children Welfare Act has subsequently given birth to the establishment of the 'Minimum Standard Requirements for Children's Welfare Facilities'. With such act and standards in place, much attention is now paid to a physical improvement of disabled children nurturing facilities, too. In order to make the requirements for such facilities more complete and substantial, local governments have enacted their own ordinances on the basis of the major policies regarding the universal designs for the disabled, such as the Heart Building Act. As Japan has a cultural background similar to that of Korea and is equipped with the nurturing facilities systemized in accordance with the symptom and degree of disabilities, it is believed that a study on the current standards for disabled children in Japan will help to provide our domestic standards applicable to such facilities.

• 한국실내디자인학회논문집
• /
• 제21권4호
• /
• pp.190-199
• /
• 2012

In this era of information, the public library takes a important role in the local community. In several years, public libraries have been proliferated in our society. However, there have not been specific planning standards of space size for construction of public library. The situation has lead the local governments to the need of consulting for the construction and management of library in search of appropriate guideline. The research paper focuses on the result of consulting support project for construction and management of public library. It examines total 11 libraries which were consulted from 2009 to 2011. It examines the configurational differences between the first scheme from the local government and the final scheme after the consulting, and the percentages of gross areas of each parts of library, reference and reading area, office area, education and cultural area, and public common use area. The analysis concludes that reference and reading area increased by 6.4% from 34.1% to 40.5%, and public common use area reduced by 6.1% from 30.2% to 24.1%, which represents a certain tendency of the configuration ratio of the each parts. Thus, the paper could be a starting point of establishing planning standard of space size for public library.

• 디자인학연구
• /
• 제12권3호
• /
• pp.167-176
• /
• 1999

본 연구는 장애인을 고려한 환경구축의 최종목표를 가지고 있는 일련의 연구흐름 중 가장 초기단계의 연구로써 장애인의 접근.이동성에 관하여 규정하고 있는 현행 국내법규를 분석하고 평가하는 것이다. 이를 위해 현행법에서 접근.이동성과 직접적 연관을 가지고 있는 실내구성요소­개구부, 복도 및 통로, 계단, 장애인용 승강기, 장애인용 에스컬레이터, 경사로-를 선정하여 연구코자하며, 객관적인 평가를 위해 각 실내구성요소별로 과거의 법규 및 2가지 관련 기준안과 비교.분석하였다.그 결과, 현행법은 장애인을 위한 편의시설 설치 의무조항을 추가하고 대상 시설을 확대하는 등 환경개선의 의지를 보임으로써 장애인의 사회참여를 유도하고자 하였다. 그러나 각 구성요소의 세부기준들이 극히 최소의 치수로 규정되어 있고 장애를 보완시켜 줄 기타 디자인 고려사항들이 언급되어 있지 않다. 또한 장애유형별 특성이 충분히 고려되지 않아 장애인들이 실질적으로 실내환경에 접근.이동하는데 무리가 따를 수 있을 것으로 보인다. 따라서 향후에는 장애인의 의견이 폭넓게 수렴된 기준을 설정하여 질적인 향상을 도모해야 할 것이며 선진복지국가들의 장애인관련 법률 및 규범을 분석.연구함으로써 우리실정에 맞게 접목시키는 노력도 잇따라야 할 것이다.