• 제목/요약/키워드: Standard C/T

검색결과 694건 처리시간 0.03초

Effect of Hydrogenated Lecithin on Cytotoxicity of Liposome

  • Bae, Duck-Hwan;Shin, Jae-Sup;Jin, Fan-Long;Shin, Gwi-Su;Park, Soo-Jin
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권2호
    • /
    • pp.339-342
    • /
    • 2009
  • In this study, a hydrogenated lecithin-containing liposome was prepared using a sonicator and microfluidizer at high shear. The surface tension, particle size, turbidity, and transition temperature ($T_c$) of the liposome were investigated and compared with the commercially available standard surfactant Tween-60. The cytotoxicities were characterized using the MTT method. The surface tension of hydrogenated lecithin was found to be higher than that of Tween-60. The particle size prepared at above $T_c$ was smaller than that prepared below $T_c$. The results of the cytotoxicity experiment indicated that Lecinol 10 exhibits the highest I$C_{50}$ value, which shows its high safety in this study.

교사환경기준에 관한 연구 (A Study on Environmental Standards of School Building)

  • 홍석표;박영수
    • 한국학교ㆍ지역보건교육학회지
    • /
    • 제1권1호
    • /
    • pp.11-43
    • /
    • 2000
  • The purpose of this study was, through analyzing the previous researches, to grasp the present status of environment of school building(ESB), research the sundry records of each element and, through comparative analysis of the standard of ESB in Korea, the United States, and Japan, select the normative standard of ESB, to clarify the point at issue presented in Regulation of Construction & facility Management for Elementary and and Secondary School in Korea, and to suggest an alternative preliminary standard of ESB. To carry out a research for this purpose, these were required: 1. to investigate the existing present status of ESB, 2. to make a comparative analysis of the standard of ESB in each country, 3. to suggest the normative standard of preliminary standard of ESB, 4. to analyze the controversial points of the standard of ESB in Korea, 5. to suggest an alternative preliminary standard of ESB. The conclusions were as follows: 1. Putting, through analyzing the previous researches, the existing present status of ESB together, it seemed that lighting environment, indoor air environment and noise environment were all in poor conditions. 2. In the result of a comparative analysis of the standard of ESB in Korea, Japan and the United States, in Korea the factors of each lighting and indoor air environment were not presented properly, in Japan, in lighting environment aspect, the standard on natural lighting and the factors on brightness were not presented., and in the USA the essential factors of each environment were throughly presented. In the comparison of the standards on each factor, Korea showed that the standard level presented was less properly prescribed than those of the USA and Japan but it also showed that the standard levels prescribed in the USA and in Japan were mostly similar to the standard levels in records investigated. 3. With the result of the normative standard selection on School Builiding environment factor of prescribed in this study, the controversial points of the standard of ESB in Korea were analyzed and the result was utilized to suggest new preliminary standard of ESB. 4. As the result of the analysis of the controversial points of the standard of ESB in Korea, it was found that the standard of ESB in Korea should be established on a basis of School Health Act and be concretely presented in School Health Regulation and School Health Rule. The factors of each environment was improperly presented in the existing standard of ESB in Korea. Moreover the standard of them was inferior to that of the records investigated and those of in the USA and in Japan and it also showed that the standard of it in Korea was improper to maintain Comfortable Learning Environment. 5. A suggested preliminary standard of ESB acquired through above study as follows: 1) In this study a new kind of preliminary standard of ESB is divided into lighting environment, indoor air environment, noise environment, odor environment and for above classification, reasonable factor and standard should be established and the controling way on each standard and countermeasures against it should be considered. 2) In lighting environment, the factors of natural lighting are divided into daylight rate, brightness, glare. In the standard on each factor, daylight rate should secure 5% of a mean daylight rate and 2% of a minimum daylight rate, brightness ratio of maximum illumination to minimum illumination should be under 10:1, and in glare there should not be an occurrence factor from a reflector outside of the classroom. And the factors of unnatural lighting are illumination, brightness, and glare. In the standard on each factor, illumination should be 750 lux or more, brightness ratio should be under 3 to 1, and glare should not occur. And Optimal reflection rate(%) of Colors and Facilities of Classroom which influences lighting environment should be considered. 3) In indoor air environment factors, thermal factors are divided into (1) room temperature, (2) relative humidity, (3) room air movement, (4) radiation heat, and harmful gases (5) CO, (6) $CO_2$ that are proceeded from using the heating fuel such as oval briquettes, firewood, charcoal being used in most of the classroom, and finally (7) dust. In the standard on each factor, the next are necessary; room temperature: $16^{\circ}C{\sim}26^{\circ}C$(summer : $E.T18.9{\sim}23.8^{\circ}C$, winter: $E.T16.7{\sim}21.7^{\circ}C$), relative humidity: $30{\sim}80%$, room air movement: under 0.5m/sec, radiation heat: under $5^{\circ}C$ gap between dry-bulb temperature and wet-bulb temperature, below 1000 ppm of ca and below 10ppm of $CO_2$, dust: below 0.10 $mg/m^3$ of Volume of dust in indoor air, and ventilation standard($CO_2$) for purification of indoor air : once/6 min.(about 7 times/40 min.) in an airtight classroom. 4) In the standard on noise environment, noise level should be under 40 dB(A) and the noise measuring way and the countermeasures against it should be considered. 5) In the standard on odor environment, odor level under Physical Method should be under 2 degrees, and the inspecting way and the countermeasures against it should be considered.

  • PDF

Cpk Index Estimation under Tw (the weakest t-norm)-based Fuzzy Arithmetic Operations

  • Hong, Dug-Hun
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • 제8권3호
    • /
    • pp.170-174
    • /
    • 2008
  • The measurement of performance of a process considering both the location and the dispersion of information about the process is referred to as the process capacity indices (PCIs) of interest, $C_{pk}$. This information is presented by the mean and standard deviation of the producing process. Linguistic variables are used to express the evaluation of the quality of a product. Consequently, $C_{pk}$ is defined with fuzzy numbers. Lee [Eur. J. Oper. Res. 129(2001) 683-688] constructed the definition of the $C_{pk}$ index estimation presented by fuzzy numbers and approximated its membership function using the "min" - norm based Zadeh's extension principle of fuzzy sets. However, Lee's result was shown to be invalid by Hong [Eur. J. Oper. Res. 158(2004) 529-532]. It is well known that $T_w$ (the weakest t-norm)-based addition and multiplication preserve the shape of L-R fuzzy numbers. In this paper, we allow that the fuzzy numbers are of L-R type. The object of the present study is to propose a new method to calculate the $C_{pk}$ index under $T_w-based$ fuzzy arithmetic operations.

가공송전용 철탑설계기준(안) 소개 및 주요내용 해설 (Introduction of the Design Standard of Tower for Overhead Transmission Line in KEPCO)

  • 김경호;우정욱;심응보;신태우;유철환;방항권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 하계학술대회 논문집 A
    • /
    • pp.351-353
    • /
    • 2002
  • Up to now the design standard of tower for overhead transmission line in KEPCO was revised four times since 1970. During last year. we had reviewed this design standard. This paper shows the design standard of tower for overhead transmission line in KEPCO. In this standard, a kind of tower was defined as standard tower and special tower. Also we had defined usage range of standard tower, tower height, arrangement of power line, design condition of tower arm and etc. On the wind pressure, we had defined basic velocity pressure per region and maximum wind pressure. For special region, design wind pressure will be considered the receded wind velocity of meteorological observatory and regional condition by this standard.

  • PDF

oneM2M 표준 IoT 플랫폼 기반 스마트시티 데이터 마켓플레이스 설계 및 구현 (Design and Implementation of Smart City Data Marketplace based on oneM2M Standard IoT Platform)

  • 정승명;김성윤;이인송
    • 인터넷정보학회논문지
    • /
    • 제20권6호
    • /
    • pp.157-166
    • /
    • 2019
  • oneM2M은 표준 API를 통해 디바이스 및 서비스 간 상호호환성을 보장하여 국내외 스마트시티 플랫폼 구축에 활용되고 있다. 스마트 시티에서 수집되는 데이터를 손쉽게 유통하기 위해서는 기존 표준에 있는 접근 제어 기능을 확장할 필요가 있다. 본 논문은 기존 oneM2M 표준의 접근 제어 기법과 비교해 데이터 판매자와 구매자 간 데이터 유통 시 사람의 개입이 최소화된 방안을 제시한다. 제시된 방안을 통해 oneM2M 데이터 마켓플레이스 API로 플랫폼에 확장 개발하고 데이터 마켓플레이스 포털과 연동하였다. 또한 스마트시티 시범 서비스를 개발하여 데이터 마켓플레이스 활용 예시를 제시하였다.

An Experimental Study on the Biomechanical Effectiveness of Bone Cement-Augmented Pedicle Screw Fixation with Various Types of Fenestrations

  • Yoon, Sang Hoon;Lee, Sang Hyung;Jahng, Tae-Ahn
    • Journal of Korean Neurosurgical Society
    • /
    • 제65권6호
    • /
    • pp.779-789
    • /
    • 2022
  • Objective : To analyze the effects of the number and shape of fenestrations on the mechanical strength of pedicle screws and the effects of bone cement augmentation (BCA) on the pull-out strength (POS) of screws used in conventional BCA. Methods : For the control group, a conventional screw was defined as C1, a screw with cannulated end-holes was defined as C2, a C2 screw with six pinholes was defined as C3, and the control group type was set. Among the experimental screws, T1 was designed using symmetrically placed thru-hole type fenestrations with an elliptical shape, while T2 was designed with half-moon (HM)-shaped asymmetrical fenestrations. T3 and T4 were designed with single HM-shaped fenestrations covering three pitches and five pitches, respectively. T5 and T6 were designed with 0.6-mm and 1-mm wider fenestrations than T3. BCA was performed by injecting 3 mL of commercial bone cement in the screw, and mechanical strength and POS tests were performed according to ASTM F1717 and ASTM F543 standards. Synthetic bone (model #1522-505) made of polyurethane foam was used as a model of osteoporotic bone, and radiographic examinations were performed using computed tomography and fluoroscopy. Results : In the fatigue test, at 75% ultimate load, fractures occurred 7781 and 9189 times; at 50%, they occurred 36122 and 82067 times; and at 25%, no fractures occurred. The mean ultimate load for each screw type was 219.1±52.39 N for T1, 234.74±15.9 N for T2, 220.70±59.23 N for T3, 216.45±32.4 N for T4, 181.55±54.78 N for T5, and 216.47±29.25 N for T6. In comparison with C1, T1, T2, T3, T4, and T6 showed significantly different ultimate load values (p<0.05). However, when the values for C2 and the fenestrated screws were evaluated with an unpaired t test, the ultimate load value of C2 significantly differed only from that of T2 (p=0.025). The ultimate load value of C3 differed significantly from those of T1 and T2 (C3 vs. T1 : p=0.048; C3 vs. T2 : p<0.001). Linear correlation analysis revealed a significant correlation between the fenestration area and the volume of bone cement (Pearson's correlation coefficient r=0.288, p=0.036). The bone cement volume and ultimate load significantly correlated with each other in linear correlation analysis (r=0.403, p=0.003). Conclusion : Fenestration yielded a superior ultimate load in comparison with standard BCA using a conventional screw. In T2 screws with asymmetrical two-way fenestrations showed the maximal increase in ultimate load. The fenestrated screws can be expected to show a stable position for the formation of the cement mass.

디지털 지상파 및 다중 표준 수신을 위한 RF 모듈 설계 (A RF Module for digital terrestrial and multi-standard reception)

  • 고민호;;신현식;박효달
    • 한국전자통신학회논문지
    • /
    • 제1권1호
    • /
    • pp.8-19
    • /
    • 2006
  • 디지털 지상파 및 다중 표준(DVB-C, ISDB-T, DVB-H) 수신에 응용할 수 있는 RF 모듈을 개발하였다. 단일변환 방식을 적용하였고 광대역(45MHz~860MHz) 방송 채널을 세 개(UHF, VHF_HIGH, VHF_LOW)의 대역으로 분할하여 영상신호 응답 및 위상잡음 특성, IF 평탄도와 같은 전기적 특성을 만족시킬 수 있었다. 또한 아날로그 방송과 디지털 방송이 함께 서비스되는 환경에서 아날로그 신호 및 디지털 신호의 인접채널 간섭 및 동일채널 간섭 특성과 같은 디지털 수신 성능 규격을 만족하도록 하였다.

  • PDF

디지털 지상파 및 다중 표준 수신을 위한 RF 모듈 설계 (A RF Module for Digital Terrestrial and Multi-standard Reception)

  • 고민호;박욱기;신현식;박효달
    • 한국통신학회논문지
    • /
    • 제31권3A호
    • /
    • pp.345-355
    • /
    • 2006
  • 디지털 지상파 및 다중 표준(DVB-C, ISDB-T, DVB-H) 수신에 응용할 수 있는 RF 모듈을 개발하였다. 단일변환 방식을 적용하였고 광대역($45MHz{\sim}860MHz$) 방송 채별을 세 개(UHF, VHF_HIGH, VHF_LOW)의 대역으로 분할하여 영상신호 응답 및 위상잡음 특성, IF 평탄도와 같은 전기적 특성을 만족시킬 수 있었다. 또한 아날로그 방송과 디지털 방송이 함께 서비스되는 환경에서 아날로그 신호 및 디지털 신호의 인접채널 간섭 및 동일채널 간섭 특성과 같은 디지털 수신 성능 규격을 만족하도록 하였다.

손실계수 표준기 제작 및 그 특성 (Development and Its Characteristics of a Dissipation Factor Standard)

  • 김한준;강전홍;한상옥
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
    • /
    • pp.527-528
    • /
    • 2006
  • A dissipation factor standard of decade type having the range of 1 to 0.0001 at the frequency of 1 kHz and 10 kHz was fabricated using "T" networks combined R and C components. The values of the fabricated dissipation factor standard were adjusted within 1% of the nominal values at 0.0001 dial range and 0.05% at the others. This dissipation factor standard is used as a working standard for calibration of a impedance measurement meter at KRISS and as a primary standard of dissipation factor field at NML-SIRIM in Malaysia.

  • PDF