• 한국세라믹학회지
• /
• 제28권2호
• /
• pp.109-118
• /
• 1991

Steady-state sublimation vapour pressures of anhydrous bismuth triiodide have been measured by the torsion-effusion method from 488.8 to 570.5 K and equilibrium sublimation pressures were obtained from the steady-state data. The standard sublimation enthalpy changes derived by both second(modified sigma function) and third(average enthalpy method) law methods were 159.316${\pm}$0.055, 137.67${\pm}$1.43 kJ$.$mol-1 respectively. The standard sublmation entropy change derived by modified sigma function was 232.88${\pm}$0.10 J$.$K-1$.$mol-1. The reliable standard sublimation enthalpy change based on a correlation of {{{{ { TRIANGLE }`_{cr } ^{g } }} H{{{{ { 0} atop {m } }}(298.15K) and {{{{ { TRIANGLE }`_{cr } ^{g } }} S{{{{ { 0} atop {m } }}(298.15K), a recommended p(T) equation has been obtained for BiI3(cr) ; lg(p/Pa)=-(C$.$K/T)+5.071lg(T/K)-2.838${\times}$10-3(T/K)-7.758${\times}$103(K/T)2+1.4519 where C={{{{{ { TRIANGLE }`_{cr } ^{g } }} H{{{{ { 0} atop {m } }}(298.15K)/0.019146 kJ$.$mol-1}-456.27.

• 대한수학회논문집
• /
• 제33권2호
• /
• pp.527-533
• /
• 2018

Let $\mathcal{X}$ be a countably generated Hilbert module over a locally $C^*$-algebra $\mathcal{A}$ in multiplier module M($\mathcal{X}$) of $\mathcal{X}$. We propose the necessary and sufficient condition such that a sequence $\{h_n:n{{\in}}\mathbb{N}\}$ in M($\mathcal{X}$) is a standard frame of multipliers in $\mathcal{X}$. We also show that if T in $b(L_{\mathcal{A}}(\mathcal{X}))$, the space of bounded maps in set of all adjointable maps on $\mathcal{X}$, is surjective and $\{h_n:n{{\in}}\mathbb{N}\}$ is a standard frame of multipliers in $\mathcal{X}$, then $\{T{\circ}h_n:n{\in}\mathbb{N}}$ is a standard frame of multipliers in $\mathcal{X}$, too.

• Progress in Superconductivity
• /
• 제6권1호
• /
• pp.24-31
• /
• 2004

Magnetic $T_{c}$ of composite superconductors has been studied for providing a standard method. Various magnetization-temperature curves of NbTi, $Nb_3$Sn and Bi-2223 wires were measured using a SQUID magnetometer. Magnetization-temperature curve of zero-field-cooled procedure showed larger values than fie Id-cooled procedure. To obtain higher resolution near the onset temperature, we employed a two-field-direction method which measures a magnetization-temperature curve of a specimen first in positive and then negative fields. Analytical comparison of the magnetic $T_{c}$, with the resistive T$_{c}$ was accomplished for three specimens. The magnetic $T_{c}$/ mettled showed more detailed information on superconducting state of a specimen than the resistive$T_{c}$/ method. We have also studied the field dependence of the magnetic $T_{c}$ from 5 Oe to 120 Oe, however, no significant difference on field strength was found in our three specimensns

• 한국세라믹학회지
• /
• 제27권7호
• /
• pp.943-951
• /
• 1990

Steady-state sublimation vapour pressures of anhydrous bismuth triiodide have been measured by the continuous gravimetric Kundsen-effusion method from 430.0 to 558.9 K and equilibrium sublimation pressures were obtained from the steady-state data. Condensation coefficients and their temperature dependence have been derived from the effusiion measurement. Condensation coefficients ranged from 0.159 to 0.048(475 to 500K), the activation enthalpy and entropy for condensation have been obtained as -93.38kTmol-1 and -212.70JK-1mol-1. The standard sublimation enthalpy changes derived by both second(modified sigma function) and third(average enthalpy method) law methods were 138.261$\pm$0.023, 138.74$\pm$0.002kJmol-1 respectively. The standard sublimation entropy change derived by modified sigma function was 191.98$\pm$0.047 JK-1mol-1. The reliable standard sublimation enthalpy change based on a correlation of ΔgcrHom(298.15K) and ΔgcrSom(298.15K), a recommended p(T) equation has been obtained for BiI3(cr) ; 1g(p/Pa)=-C/(T/K)＋5.0711g(T/K)-2.838$\times$10-3(T/K)-7.758$\times$103(K/T)2＋1.4519 where p is in Pa, T in Kelvin, ΔgcrHom(298.15K) in kJmol-1 and C=(ΔgcrHom(298.15K)-8.7358)/1.9146$\times$10-2.

• 대한수학회지
• /
• 제33권4호
• /
• pp.763-775
• /
• 1996

For $Q = [0,S] \times [0,T]$ let C(Q) denote Yeh-Wiener space, i.e., the space of all real-valued continuous functions x(s,t) on Q such that x(0,t) = x(s,0) = 0 for every (s,t) in Q. Yeh [10] defined a Gaussian measure $m_y$ on C(Q) (later modified in [13]) such that as a stochastic process ${x(s,t), (s,t) \epsilon Q}$ has mean $E[x(s,t)] = \smallint_{C(Q)} x(s,t)m_y(dx) = 0$ and covariance $E[x(s,t)x(u,\upsilon)] = min{s,u} min{t,\upsilon}$. Let $C_\omega \equiv C[0,T]$ denote the standard Wiener space on [0,T] with Wiener measure $m_\omega$. Yeh [12] introduced the concept of the conditional Wiener integral of F given X, E(F$\mid$X), and for case X(x) = x(T) obtained some very useful results including a Kac-Feynman integral equation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.241-245
• /
• 2005

This study introduces the wind turbine (W/T) noise evaluation procedure required in the international standard (IEC 61400-11) and monitoring system for the evaluation. Noise emission characteristics of a 750kW W/T generator is investigated. Test and evaluation are performed on J48 W/T model which is under operation in Daekwanryung Wind Test Site. With the noise signal, meteorological data and W/T operational data are monitored in real time by the integrated monitoring system using LabVIEW. From the measured noise data, acoustic power level and tonality of the W/T are estimated under the wind speeds required by the international standard.

• 전자통신동향분석
• /
• 제36권5호
• /
• pp.92-102
• /
• 2021

Owing to various restrictions in-field application, the low-speed, low-power-based industrial Internet-of-Things (IoT) network built in extremely harsh industrial environment sites requires multi-hop, channel hopping, and low-latency transmission characteristics. In the past, wired networks were used in industrial facilities; however, network technologies based on the Industrial IoT Network standard standardized for industrial applications, such as WirelessIO link, WirelessHART, SmartMesh, and eStar Link satisfy industrial requirements. Recently, the use of industrial IoT networks in industrial facilities has rapidly expanded. This paper covers the developments in industrial IoT network technologies and summarizes the major industrial IoT standard technologies that meets the requirements of industrial sites.

• 대한기계학회논문집A
• /
• 제33권4호
• /
• pp.409-416
• /
• 2009

Standard procedures for a fracture toughness testing require very severe restrictions for the specimen geometry to eliminate a size effect on the measured properties. Therefore, the used standard fracture toughness data results in the integrity assessment being irrationally conservative. However, a realistic fracture in general structures, such as in nuclear power plants, may develop under the low constraint condition of a large scale yielding with a shallow surface crack. In this paper, cleavage fracture toughness tests have been made on side-grooved PCVN (precracked charpy V-notch) type specimens (10 by 10 by 55 mm) with various crack depths. The constraint effects on the crack depth ratios were evaluated quantitatively by the developed scaling method using the 3-D finite element method. After the fracture toughness correction from scaling model, the statistical size effects were also corrected according to the standard ASTM E 1921 procedure. The results were evaluated through a comparison with the $T_0$ of the standard CT specimen. The corrected $T_0$ for all of the PCVN specimens showed a good agreement to within $5.4^{\circ}C$ regardless of the crack depth, while the averaged PCVN $T_0$ was $13.4^{\circ}C$ higher than the real CT test results.

• 한국환경성돌연변이발암원학회지
• /
• 제21권1호
• /
• pp.44-50
• /
• 2001

To identify nongenotoxic carcinogen determined as negative by ICH guideline-recommended standard genotoxicity test battery; Ames test, chromosome aberration assay, mouse lymphoma $tk^{+/-}$ assay, in vivo micronucleus assay, we picked bisphenol A as a model compound. In this study, we applied in vitro BalB/c 3T3 cell transformation assay and Syrian hamster embryo (SHE) cell transfarmation assay. Bisphenol A was treated upto $769.2 ug/m{\ell}$ in BalB/c 3T3 cells and upto $125 ug/m{\ell}$ in SHE cells. bisphenol A didn't induced morphological transformation both with one stage treatment protocol and with two stage treatment protocol. But, treated far 48 hr, Bisphenol A induced morphological transformation significantly in SHE cells.

• 한국자기학회지
• /
• 제11권1호
• /
• pp.38-44
• /
• 2001

저자장 영역(1 mT 이하)에서 국가 표준시스템을 분해능 0.26 nT 수준으로 확립하였다. 비자성 재료로 건축하여 자성체에 의한 영향을 배제할 수 있는 비자성동에서 세슘 광펌핑 마그네토미터, 3-축 헬름홀츠 코일 등을 이용하여 자동적으로 지자장을 상쇄시키는 장치를 만들었다. 그 특성은 대역폭 10 Hz에서 0.1 nT/10 min이었다. 지자장이 상쇄된 공간에 최적 설계한 단전류-다층 솔레노이드(길이 1.02 m, 평균반경 0.l1467 m, 단위길이당 권선수 1000 turns/m)를 설치하고, 솔레노이드에 정밀 전류를 홀려 자장을 발생시키는 방법을 사용하여 저자장 표준시스템의 성능을 향상시켰다. 솔레노이드 중심에서 자장의 안정도는 $\pm$ 1 cm 범위에서 1.0$\times$$10^{-7}$ T이었다. 핼륨 광펌핑 마그네토미터를 이용하여 측정한 솔레노이드의 코일상수는 1.231 058 9 mT/A이고, 온도계수는 0.38 nT/$^{\circ}C$이었다. 저자장 표준시스템은 저자장 측정기의 교정 및 저자장관련 시험검사 등에 사용된다.