• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.80-85
• /
• 2008

A PVIB(Photovoltaic in Building) system is united by a constituent outer covering and can expect dual effects that reduce expenses for the establishment of a PV system. It is a profitable technology because it does not need a building as it is a stand alone PV system. This paper presents design, operational features analysis, and PCS(Power Conditioning System) of grid-connected 30kW PVIB set up on the library of Dongshin University. For a sustainable photovoltaic system in this area, the data of the PVIB system are collected and analyzed by monitoring system using LabView. PCS of the grid-connected PVIB system, also, is designed for optimal operation with characteristics suggested in this paper.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.532-535
• /
• 2003

In this paper, a Pl controlled feedback closed-loop voltage regulation scheme of the three-phase squirrel cage rotor self-excited induction generator (SEIG) driven by a variable-speed prime mover (VSPM) such as a wind turbine is designed on the basis of the static VAR compensator (SVC) and discussed in experiment fer the promising stand-alone power independent conditioner. The simulation and experimental results of the three-phase SEIG with the simple SVC controller for its stabilized voltage regulation prove the practical effectiveness of the additional SVC control loop scheme including the PI controller with fast response characteristics and steady-sate performance improvement.

• 전자공학회논문지A
• /
• 제33A권4호
• /
• pp.152-161
• /
• 1996

In tis work, a three-stage pipelined A/D converter (ADC) was implemented to obtain 10-bit resolution at a conversion rate of 20 msamples/s for video applications. The ADC consists of three identical stages employing a mid-rise coding technique. The interstage errors such as offsets and clock feedthrough are digitally corrected in digitral logic by one overlapped bit between stages. The proposed ADC is optimized by adopting a unit-capacitor array architecture in the MDAC to improve the differential nonlinearity and the yield. Reduced power dissipation has been achieve dby using low-power latched comparators. The prototype was fabricated in a 0.8$\mu$m p-well CMOS technology. The ADC dissipates 160 mW at a 20 MHz clock rate with a 5 V single supply voltage and occupies a die area of 7 mm$^{2}$(2.7 mm $\times$ 2.6mm) including bonding pads and stand-alone internal bias circuit. The typical differential and integral nonlinarities of the prototype are less than $\pm$ 0.6 LSB and $\pm$ 1 LSB, respectively.

• 한국기계가공학회지
• /
• 제8권3호
• /
• pp.82-89
• /
• 2009

The purpose of this study is to investigate the actual field application of the linear piston pump for the solid transferring driven by the hydraulic power unit. In this paper, the numerical analysis and performance evaluating experiments were performed. CFX program has been used to obtain the solutions for the problems of three-dimensional, turbulent water flow in the linear piston pump. The velocity and the pressure distributions are obtained using the turbulent $k-\varepsilon$ model. To evaluate the performance of the linear piston pump, the performance test stand and data acquisition system were manufactured. The numerical predictions agree favorably with experimental results within 7% error. Speed of the piston which is satisfied the flow rate 3,000l/min which considers from basic design became 0.33m/s. This paper could be applied to the design of the linear piston pump for the fish transferring.

• 한국기계가공학회지
• /
• 제8권4호
• /
• pp.20-27
• /
• 2009

The characteristics of titanium alloy as a relatively advanced material is low density, avirulent and, superior corrosive resistant, therefore the use of titanium alloy is increasing lately in aerospace and mechanical technologies, precision machinery, electronics industry, petro-chemical industries and biomedical areas. In these days, the titanium alloy product is required various surface qualities of not only smooth surface but also rough surface depending on usages. The purpose of this experimental research is to find the optimum surface roughness of titanium alloy of Ti-6Al-4V, by micro abrasive blasting as depending variable conditions of working pressure, nozzle size, working time, stand of distance and power particle size.

• 한국소음진동공학회논문집
• /
• 제12권3호
• /
• pp.181-186
• /
• 2002

A seismic analysis is one of crucial design procedures of an axial blower used in nuclear power Plants. The blower should be operated even in ar emergency such as an earthquake. The blower should be designed in order to stand against an earthquake. For the seismic analysis, Ive perform the modal analysis and then evaluate the required response spectrum (PRS) from the given floor response spectrum (FRS). A finite element model of the blower is established by using a commercial FEM code of ANSYS. After the finite element modeling. the natural frequencies. the mode shapes and the participation factors are obtained from the modal analysis. The PRS is acquired by a numerical approach on the basis of the principle of mode superposition. We verify the structura safety of the axial blower and confirm the validity of the present seismic analysis results.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제3B권3호
• /
• pp.139-146
• /
• 2003

In this paper, the steady-state operating performance analysis for the three-phase squirrel cage rotor self-excited induction generator (SEIG) driven by a variable-speed prime mover (VSPM) in addition to a constant-speed prime mover (CSPM) is presented on the basis of an effective algorithm based on its frequency-domain equivalent circuit. The operating characteristics of the three-phase SEIG coupled by a VSPM and/or a CSPM are evaluated on line processing under the condition of the electrical passive load parameters variations with simple and efficient computation processing procedure in unregulated voltage control loop scheme. A three-phase SEIG prototype setup with a VSPM as well as a CSPM is implemented for the small-scale clean renewable and alternative energy utilizations. The experimental operating characteristic results are illustrated and give good agreements with the simulation ones.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2541-2547
• /
• 2010

본 논문에서는 대기 상태에서 저전력 eFuse OTP 메모리 IP틀 구현하기 위해 속도가 문제가 되지 않는 반복되는 블록 회로에서 1.2V 로직 트랜지스터 대신 누설 (off-leakage) 전류가작은 3.3V의 MV (Medium Voltage) 트랜지스터로 대체하는 설계기술을 제안하였다. 그리고 읽기 모드에서 RWL (Read Word-Line)과 BL의 기생하는 커패시턴스를 줄여 동작전류 소모를 줄이는 듀얼 포트 (Dual-Port) eFuse 셀을 사용하였다. 프로그램 전압에 대한 eFuse에 인가되는 프로그램 파워를 모의실험하기 위한 등가회로를 제안하였다. 하이닉스 90나노 CMOS 이미지 센서 공정을 이용하여 설계된 512비트 eFuse OTP 메모리 IP의 레이아웃 크기는 $342{\mu}m{\times}236{\mu}m$이며, 5V의 프로그램 전압에서 42개의 샘플을 측정한 결과 프로그램 수율은 97.6%로 양호한 특성을 얻었다. 그리고 최소 동작 전원 전압은 0.9V로 양호하게 측정되었다.

• 생명과학회지
• /
• 제14권3호
• /
• pp.484-489
• /
• 2004

인공관절은 21세기 정형외과 발전의 주요변화들 중의 하나이다. 1997년이래 전 세계적으로 무릎인공관절(Total Knee Arthroplasty: TKA)을 사용하는 사람들이 해마다 약 600,000명씩 증가하고 있는 추세이고 미국에서만 인공관절을 사용하고 있는 사람들이 210,000명에 달하고 있으며 그 시장은 대략 $5 billion을 넘고 있다(7). 무릎인공관절은 일상생활에서 의자에 앉았다 일어날 때 계단을 올라 갈 때 등, 무릎의 근 모멘트가 적당한 활동을 해서 무릎관절 근육에 지레와 같은 작용을 하게 하고, 완전한 무릎으로 정상인의 무릎과 같은 기능을 오랫동안 유지하게 한다. 이러한 목적을 달성하기 위해서는 무릎인공관절 디자인 시 정상적인 무릎 회전축(normal knee's axes of rotation)들의 정확한 위치를 파악하는 것은 중요하다. 인공관절 수술 후 무릎관절의 신전과 굴곡 운동을 하는 동안 하나의 회전축(single-axes)을 가진 하나의 회전 반경(single-radius)을 알아보는 것은 여러 축(multi-axes)으로 움직이게 된다는 다축 회전반경(multi-radius)을 분석하기에 앞서 중요한 연구이다. 따라서 본 연구에 서는 무릎이 신전운동과 굴곡 운동 시 신전과 굴곡 모멘트를 만들어내는 대퇴 사두근(quadriceps muscle)과 무릎 오금근 (hamstring)의 역할을 알아보았고, 또한 모멘트와 대퇴 사두근의 iEMG 형태를 파악하였다. 본 연구를 수행하기 위해 무릎인공관절 수술을 받고 1년과 3년이 지난 정상적인 생활을 하는 피검자(1년2명, 3년2명)를 대상으로 Isometric 테스트를 위한 KIN-COM III을 사용하여 60$^\circ$, 30$^\circ$의 무릎굴곡 측정을 하였고, Isokinetic concentric 테스트를 위해서 무릎굴곡각도의 $10^\circ$-80$^\circ$까지 움직임을 측정하였다 또한 15$^\circ$-75$^\circ$까지의 신전운동(sit-to-stand movement)과 굴곡운동(stand-to-sit movement)을 실시하여 시간의 차이, 내전과 외전의 차이 그리고 iEMG의 차이를 알아보았다. 본 연구의 데이터는 여러 번의 실험을 통하여 가장 일반적인 수치를 사용하였다. 이 때 16-channel BTS TELEMG를 사용하여 대퇴사두근과 무릎오금근의 근육활동모양을 알아보았다. 본 연구결과는 시술 후 3년이 지나면서 TKR (Total Knee Replacement)의 대퇴 사두근 토큐가 약해지는 것으로 나타났고, iEMG 실험에서는 N-TKR (Non-Total Knee Replacement)의 대퇴 사두근이 TKR의 대퇴 사두근 보다 근 수축력이 더 크게 발휘되는 것으로 밝혀졌다. 단축회전반경의 굴곡과 신전의 $10^\circ$-80$^\circ$까지의 각 속도는 굴곡동작이 1.19s, 신전 동작이 1.68s로 나타났다. 굴곡과 신전동작에서 다리의 외전(abduction)의 각도변화는 굴곡 시 5.5$^\circ$, 신전 시 5.2$^\circ$로 나타났고, 내전(adduction)의 각도변화는 굴곡 시 7.2$^\circ$, 신전 시 6.1$^\circ$로 나타났다. 대퇴 사두근의 iEMG변화에서는 15$^\circ$-60$^\circ$까지 vastus medialis (VM), vastus lateralis (VL), rectus femoris (RF) 모두 굴곡동작에서 큰 값으로 나타났고, 61$^\circ$-75$^\circ$사이에서는 신전동작에서 iEMG가 큰 값으로 나타났다. 이와 같은 결과들은 인공관절 수술자들의 다축회전 반경을 분석하기에 앞서 중요한 선행연구가 될 것으로 생각된다.

• 한국대기환경학회지
• /
• 제23권4호
• /
• pp.440-448
• /
• 2007

Although the anthracite power plant is an important source of greenhouse gas, research on this type of power plant has not been conducted much. The present study investigated the entire anthracite power plants in Korea and analyzed the emitted gas in connection with GC/FD and a methanizer in order to develop $CO_2$ emission factors. The study also sampled the anthracite to analyze the amount of carbon and hydrogen using an element analyzer, and to measure the calorie using an automatic calorie analyzer. The emission factors computed through the fuel analysis was 30.45 kg/GJ and that computed through the $CO_2$ gas analysis was 26.48 kg/GJ. The former is approximately about 15% higher than the latter. When compared the carbon content factors of anthracite with that of bituminous coal, the value of anthracite was 24% higher Compared with IPCC values, the emission factors by the fuel was 14% higher, and that by the emitted $CO_2$ gas was about 1.2% lower. More research is needed on our own emission factors of various energy-consuming facilities in order to stand on a higher position in international negotiations regarding the treaties on climate changes.