• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.320-326
• /
• 1999

In this study, 15 survival functions in integral and difference forms for forest plantation were derived based on assumptions for the number of surviving trees and the differential forms of the mortality rate model. Then, performance of the models was evaluated by fitting to remeasurement data of unthinned white pine(Pinus strobes) forest plantation. As a result, three equations associated with a power function of age, $t^{\beta}$, are somewhat more suitable for describing the effect of self-thinning over time. On the other hand, a general survival function for Japanese larch(Larix leptolepts) forest plantation was derived in order to exam the effect of site quality on self-thinning procedures. The results indicate that the $N_{min}$ is negatively correlated with site index and, even though the same initial stand density was assumed, the survival function curves differ in shapes associated with site index values.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.06a
• /
• pp.310-317
• /
• 2008

Although aerial LiDAR had been launched commercially several years ago, it is still difficult to study data acquisition conditions and effects with various datasets because of its acquisition cost. Thus, this research was performed to study data acquisition conditions and effects with virtually various datasets. For this research, 3D tree models and forest stand models were built to represent graded tree sizes and tree plantation densities. Also, a variable aerial LiDAR acquisition model was developed. Then, through controlling flight height parameter, one of the data acquisition parameters, virtual datasets were collected for various data acquisition densities. From those datasets, forest canopy volumes and maximum tree heights were estimated and the estimated results were compared. As the results, the estimated is getting closer to the expected during the data acquisition density increase. This research would be helpful to perform further studios on relations between forest inventory accuracy and LiDAR cost.

• Nuclear Engineering and Technology
• /
• v.14 no.3
• /
• pp.103-109
• /
• 1982

An empirical formula for determining water content as functions of uranium concentration and nitric acid normalities in uranyl nitrate solutions has been derived from a least-squares analysis of experimental data, i.e., uranium concentration, nitric acid normalities and solution densities for a large number of UO$_2$(NO$_3$)$_2$ solutions. The formula derived is Q=1-0.3628C-0.0327H$^{+}$ where Q, C, and H$^{+}$ stand for water content (g/cc), uranium concentration (g/cc), ana nitric acid normality, respectively. Atom number densities and nuclear criticality for hypothetical uranyl nitrate solutions have been calculated by using the empirical formula, ana compared with the results obtained on the basis of uranium concentration, nitric acid normality, and solution density. The empirical formula derived in this study seems to be useful in uranium concentrations ranging from 0.295g/cc down to 0.004g/cc and nitric acid normality from 5.06 to 1.00..00.

• Journal of agriculture & life science
• /
• v.45 no.5
• /
• pp.25-31
• /
• 2011

This study was conducted to develop the growth model for diameter at breast height (DBH) and basal area (BA) of Larix leptolepis stands grown in eastern mountain areas, Jeollabuk-do and to enhance the precision of the models by adding regional and climatal factors, such as altitude, mean annual rainfall, and mean annual temperature. In results, it was analyzed that Schumacher polymorphic equation might be the best model to estimate DBH and BA growth. In case of the DBH growth model, precision was improved by adding altitude and mean annual rainfall. Moreover, in case of the BA growth model, precision was improved by adding mean annual rainfall. Meanwhile, it would be necessary for more precise model to add various factors, such as stand density, mortality, thinning ratio, and edaphic status along with regional and climatal factors.

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.37-47
• /
• 2018

The objective of this study was to analyze the influences of forest management activity on the diameter distribution of Larix kaempferi Carriere stands in South Korea. We used 232 managed stands data, 47 unmanaged stands data of National Forest Inventory for this study. We employed the Weibull distribution function for estimating diameter based on percentiles and parameter recovery method. The results revealed that the average diameter breast height movements and growth of tree in the managed stands higher than the unmanaged stands according to the scenario: age, site index, and tree density change. The finding shows the percentage of the total amount of large class diameter was also high in the managed stands. The results of this study could be apply for the estimation of multi-products of timbers per diameter classes and stand structure development for Larix kaempferi Carriere stands in South Korea.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.40-51
• /
• 2021

In this paper, the design requirements was produced by analyzing domestic and foreign regulations of the vertical takeoff and landing site required to operate the urban air mobility (UAM) system in Korea and the size of the take-off and landing pads were defined, and the configuration of vertiport was proposed. First, for the metropolitan area with high population density, pilot locations of the vertical take-off and landing site were selected based on the demonstration routes suggested by the Ministry of Land, Infrastructure and Transport and analyzed the characteristics of each location and determined the number of possible installations of vertiport by measuring each site. After that, variables necessary for the operation of the vertical takeoff and landing area were set, and the hourly, daily, monthly aircraft operating cycle, the number of acceptable people, and efficiency were calculated according to the number of simultaneous operation and the number of stand. Finally, using CATIA, the configurations of the virtual vertiport was created by applying the design requirements.

• Journal of Environmental Science International
• /
• v.31 no.6
• /
• pp.479-490
• /
• 2022

This study was to evaluate the utilization of terrestrial light detection and ranging for forest inventory in coniferous forests. Heights and diameter of the stand trees were measured manually using the traditional measurement method and the method using terrestrial LiDAR. The results of two methods were compared and analyzed to evaluate accuracy and feasibility. The terrestrial LiDAR used fixed and handy types to compare the accuracy between different operational methods. Comparative analyses used a paired t-test and Bland-Altman plot analysis. In the case of tree heights, the average of difference between the traditional method and terrestrial LiDAR for each plot was 0.81 m, -0.07 m, and 0.13 m for fixed type; 2.88 m, 1.19 m, and 0.93 m for the handy type. In the case of tree diameter at breast height, the average value of the difference between traditional methods and terrestrial LiDAR for each plot was 0.13 cm, -0.66 cm, and -0.03 cm for fixed type; 2.36 cm, 2.13 cm, and 1.92 cm for the handy type. The values from the method using the fixed type was highly consistent with that using the traditional measurement methods; the average difference was closer to zero. The crown density influences the precision of the height measurement using terrestrial LiDAR in coniferous forests. Therefore, future studies should focus on verifying the accuracy of terrestrial LiDAR in forests and on expanding the utilization of terrestrial LiDARs according to their operational methods.

• The Korean Journal of Physiology and Pharmacology
• /
• v.28 no.3
• /
• pp.275-284
• /
• 2024

Worldwide, cardiovascular disease is the main cause of death, which accordingly increased by hyperlipidemia. Hyperlipidemia therapy can include lifestyle changes and medications to control cholesterol levels. Statins are the medications of the first choice for dealing with lipid abnormalities. Rosuvastatin founds to control high lipid levels by hindering liver production of cholesterol and to achieve the targeted levels of low-density lipoprotein cholesterol, another lipid lowering agents named ezetimibe may be used as an added therapy. Both rosuvastatin and ezetimibe have low bioavailability which will stand as barrier to decrease cholesterol levels, because of such depictions, formulations of this combined therapy in nanotechnology will be of a great assistance. Our study demonstrated preparations of nanoparticles of this combined therapy, showing their physical characterizations, and examined their behavior in laboratory conditions and vivo habitation. The mean particle size was uniform, polydispersity index and zeta potential of formulations were found to be in the ranges of (0.181-0.72) and (-13.4 to -6.24), respectively. Acceptable limits of entrapment efficiency were affirmed with appearance of spherical and uniform nanoparticles. In vitro testing showed a sustained release of drug exceeded 90% over 24 h. In vivo study revealed an enhanced dissolution and bioavailability from loaded nanoparticles, which was evidenced by calculated pharmacokinetic parameters using triton for hyperlipidemia induction. Stability studies were performed and assured that the formulations are kept the same up to one month. Therefore, nano formulations is a suitable transporter for combined therapy of rosuvastatin and ezetimibe with improvement in their dissolution and bioavailability.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.409-416
• /
• 2009

Forest biomass estimation is essential for greenhouse gas inventories and terrestrial carbon accounting. Remote sensing allows for estimating forest biomass over a large area. This study was conducted to estimate forest biomass and to produce a forest biomass map for Muju county using forest biomass conversion table developed by field plot data from the 5th National Forest Inventory and Landsat TM-5. Correlation analysis was carried out to select suitable independent variables for developing regression models. It was resulted that the height class, crown closure density, and age class were highly correlated with forest biomass. Six regression models were used with the combination of these three stand variables and verified by validation statistics such as root mean square error (RMSE) and mean bias. It was found that a regression model with crown closure density and height class (Model V) was better than others for estimating forest biomass. A biomass conversion table by model V was produced and then used for estimating forest biomass in the study site. The total forest biomass of the Muju county was estimated about 8.8 million ton, or 128.3 ton/ha by the conversion table.

• Journal of Forest and Environmental Science
• /
• v.33 no.3
• /
• pp.202-225
• /
• 2017

Non Timber Forest Products (NTFPs) has gained a lot of significance over the years as a means of income generation. Forests are playing a vital role in the supply of these products, however, due to their continuous extraction, the population of many species might have depleted. Very little information is known about community structure and population status of NTFPs. No specific studies have been made to find out the occurrence, availability of species and population status in the forests, supplying the resources. The present study has been carried out in community forests of the naturally occurring NTFPs in the temperate forest of the Ziro valley of Arunachal Pradesh. The main aim is to determine community structure, species composition and population status of NTFPs. Three forest stands viz., Nyilii, Dura and Gyachi were selected which are used by the Apatani tribe for extraction of the NTFPs. For evaluation of species composition and community characteristics, the sampling of the vegetation was done using the quadrat method. A total 137 species representing 68 families and 116 genera were recorded. Herbs represent the maximum diversity with 71 species followed by 35 shrub species and 31 tree species. The families Asteraceae and Rosaceaeae exhibited maximum representation followed by Urticaceae. The species under Fagaceae, Lauraceae, Rosaceae and Rutaceae were found to be important NTFP yielding species. Highest species richness was recorded in Nyilii having 124 species, while lowest in Dura with 102 species. Density of tree, shrub and herb ranged between 376 to $456\;individuals\;ha^{-1}$, 2848 to $3696\;individuals\;ha^{-1}$ and 31.44 to $36.64\;individuals\;m^{-2}$, respectively. The total basal area was found to be highest ($51.64m^2\;ha^{-1}$) in Dura followed by Nyilii ($25.32m^2\;ha^{-1}$) and lowest in Gyachi ($22.82m^2\;ha^{-1}$). In all the three study stands the species diversity indices showed the trend, herbs > shrubs > trees while the evenness index showed the trend as shrubs > herbs > trees. The overall species similarity index was highest (82.35%) between Dura and Gyachi. About 80% of the total recorded species showed clumped distribution while, no regular distribution was shown by any species. The three selected stands harbor about 50 important NTFP yielding species which are being used commonly by the Apatani people in their day to day life. Among the three study sites, overall diversity of NTFP was found highest in the Nyilii stand while the density of population was found better in Dura and Gyachi stands. The population of many species was found to be low due to continue harvesting without any sustainable management by the communities. All the selected forest stands have the potentiality to grow the high value NTFP yielding species and if managed properly, they can support the livelihood and economy of the local communities.