• The Journal of Asian Finance, Economics and Business
• /
• 제7권6호
• /
• pp.509-515
• /
• 2020

TThe cooperation on disaster prevention between the two Koreas has been mostly focused on cooperation at the recovery stage, such as emergency relief supplies and equipment support. This study aims to articulate future practical development plans by analyzing disaster cooperation between North and South Korea in accordance with the changing paradigm of international disaster cooperation. Considering the specificity of inter-Korean cooperation, the Framework for Inter-Korean Disaster Prevention Cooperation was established centering on the Sendai Framework for Disaster Risk Reduction. The framework consists of understanding and sharing disaster risks, building back better, strengthening community resilience, and supporting regional disaster action plans for continuous action. Inter-Korean disaster prevention cooperation requires sharing information about North Korean disasters. It is necessary to accurately identify and support social vulnerability to North Korean disasters. Above all, it is supporting the development of disaster action plans from a humanitarian perspective needs. A medium-to-long term resilience reinforcement plan that North Korea can resolve on its own is also needed. Since North Korea is also deeply interested in international disaster cooperation, it should be based on the direction of the Sendai Framework. Considering the uniqueness of inter-Korean cooperation, a path for North Korea to actively participate in international disaster cooperation should be established.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권3호
• /
• pp.403-407
• /
• 2016

In general, drum-type boilers are designed for base load duty and applied under constant pressure operation mode. Recently, however conditions often occur that even drum-type boilers have to operate at partial load conditions. A feasibility study on adopting the sliding pressure operation for drum-type boiler was conducted, and corresponding performance changes and effects on the equipment were analyzed by utilizing a process simulation model. As a result, the conclusion was reached that drum type boilers are able to adopt the sliding pressure operation and can improve of net efficiency at part load operation in spite of the Rankine cycle efficiency reduction due to the decreases in main steam pressure. Because of thank to improvement of high pressure turbine stage-1 internal efficiency and power savings of boiler feed water pump. The sliding pressure operation is advantageous in terms of stress level relief for boiler tube as well as maintaining the rating steam temperature at part load condition. However, cautions are required because the drum boilers have poor dynamic response characteristics which may get worse during the sliding pressure operation.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.786-792
• /
• 2014

In this paper, we propose a novel method which can be applied to test and verify the stabilization-tracking performance of Gun/Turret Driving System(GTDS) for Light Armed Helicopter(LAH). In real system, GTDS is connected to TADS/SMC and drived to aim at the target with 20mm gun. But each equipment is separately developed during exploratory development stage, so GTDS cannot be tested under real system state. We suggest new configuration of test system for evaluating the stabilization-tacking performance, in which TADS and SMC are replaced by vision acquisition unit and processing unit, respectively.

• 대한조선학회논문집
• /
• 제37권3호
• /
• pp.21-26
• /
• 2000

연안항로용 선박에 있어서 수심은 선박의 흘수와 속도에 제한을 주는 요소로 작용함으로써, 설계에 있어서 상당히 중요한 요소라 할 수 있다. 본 연구에서는 제한수심에 따른 선박의 저항성능의 변화를 알기 위해, 천수장비를 이용하여 각기 다른 수심에서 선박의 저항 및 트림, 침하를 측정하였다. 천수영향에 대한 기초적 연구단계로서, 본 연구에서는 Series60($C_B=0.6$) 선형을 대상 선형으로 선정하였다. 실험은 기존의 실험 자료와 동일한 수심조건을 주어 그 결과를 비교하였다. 수심조건은 각각 모형선 수선간장의 10, 15, 20, 25% 로 하였다.

• International Journal of Fluid Machinery and Systems
• /
• 제10권2호
• /
• pp.176-188
• /
• 2017

The nozzle-flapper valves are widely applied as a pilot stage in aerospace and military system. A subject of the analysis presented in this work is to find out a reasonable range of null clearance between the nozzle and flapper. This paper has presented a numerical flow coefficient simulation. In every design point, a parameterized model is created for flow coefficient simulation and cavitation under different conditions with varying gap width and inlet pressure. Moreover, a new test device has been designed to measure the flow coefficient and for visualized cavitation. The numerical simulation and test results both indicate that cavitation intensity gets fierce initially and shrinks finally as the gap width varies from small to large. From the curve, the flow coefficient mostly has experienced three stages: linear throttle section, transition section and saturation section. The appropriate deflection of flapper is recommended to make the gap width drop into the linear throttle section. The flapper-nozzle null clearance is optionally recommended near the range of $D_N/16$. Finally through simulation it is also concluded that the inlet pressure plays a little role in the influence on the flow coefficient.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.69-76
• /
• 2005

The laser interferometer system such as HP5529A is one of the most powerful equipment fur measurement of the straightness error in precision stages. The straightness measurement system, HP5529A is composed of a Wollaston prism and a reflector. In this system, the straightness error is defined as relative lateral motion change between the prism and the reflector and computed from optical path difference of two polarized laser beams between these optics. However, rotating motion of the prism or the reflector used as a moving optic causes unwanted straightness error. In this paper, a compensation method is proposed for removing the unwanted straightness error generated by rotating the moving optic and an experiment is carried out for theoretical verification. The result shows that the unwanted straightness error becomes very large when the reflector is used as the moving optic and the distance between the reflector and the prism is far. Therefore, the prism must be generally used as the moving optic instead of the reflector so as to reduce the measurement error. Nevertheless, the measurement error must be compensated because it's not a negligible error if a rotating angle of the prism is large. In case the reflector must be used as the moving optic, which is unavoidable when the squareness error is measured between two axes, this compensation method can be applied and produces a better result.

• 한국기술사회:학술대회논문집
• /
• 한국기술사회 1984년도 한일 합동 심포지움
• /
• pp.52-60
• /
• 1984

As far as we handle industrial products, the painting process is prerequisite; and the preparatory treatment of materials is, therefore, indispensable to the above process. However, it is a matter for regret that people are liable to overlook the importance the treatment of materials at the preparatory stage, giving themselves up to the surface of finished goods. The preparatory treatment of materials is like backstage personnel (operations) in dramatic performance; the performance cannot be successful without the support of backstage operations in surface treatment. The various methods which are being applied widely as preparatory treatment are as follow: (1) the method by using hand tools such as grinders, etc. (2) the method with blasting (3) the method with chemical coating (4) the method by getting rid of fatty substance with organic solvent The methods No. 1 and No. 2 are in use mainly for larger structures, and those No. 3 and No. 4, either singly or combined, are applied for mass-produced, smaller items (acid cleaning is applied for getting rid of rust, as the case may be). The method No. 3 is used mainly as anti-rust by forming zinc phosphate film on the surface of steel plate or enhancing the bonding power of paints by taking advantage of irregular surfaces of films. Recently are no the market steel plates treated directly with film-coating by omitting the process No. 3. Furthermore, those goods painted include not only nonferrous goods but plastics and elastomer. The present discourse describes the cleaning process by using the steam of organic acid, picked up from among No. 4, and its equipment applied.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.967-972
• /
• 2020

현재 사용되는 실험 교구는 센서를 활용하여 대부분 물리분야 실험에 적용하고 특정 실험에 잘 맞는 MBL만을 개발한 사례도 있다. 하지만, SW융합을 활용한 실험설계 단계는 없으며 교과서 속 다양한 화학실험 적용에 한계가 있고 아두이노의 경우 프로그래밍 시 학생들이 언어를 학습하고 이해하는 데 어려움이 있다. 본 논문은 기존의 microcomputer 실험의 단점 및 소프트웨어 교육의 한계를 극복하고 학습자 능동적 실험설계 과정을 포함한 SW교육 융합 과학 실험기구를 설계 및 개발하였다.

• 전기학회논문지
• /
• 제63권3호
• /
• pp.395-403
• /
• 2014

This paper presents a new approach to improve the signal to noise ratio (SNR) for local seismic disaster preventing system in densely populated area. The seismic data measured in the local site includes various sensing noises (offset or measurement noise) and man-made/natural noises (road and rail traffic noise, rotating or hammering machinery noise, human activity noise such as walking and running, wind/atmospheric pressure-generated noise, etc.). These additive noises are different in time and frequency characters. The proposed method uses 3-stages processing to reduce these different additive noises. In the first stage, misalignment offset noise are diminished by time average processing, and then the second and third stages, coherent/incoherent noises such as man-made/natural noises are suppressed by array stacking. In addition, we derived the theoretical equation of the SNR gain improved by the proposed method. To evaluate the performance of the proposed method, computer simulations were performed with real seismic data and test equipment generated data as the input.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1626-1631
• /
• 2007

The purpose of the study is to simulate the displacement of the LCD glass during process of a large size imprint. During this process, a small temperature variation makes thermal stress, which causes the horizontal variation of mold and glass. During alignment process to fix the LCD glass on a alignment stage, the vertical displacement is made by the absorption pressure and the shear stress. This study simulates the horizontal displacement of mold and glass due to temperature variation, the vertical displacement depending on the shape of absorption surface fixing the LCD glass in the alignment process, and the horizontal and vertical displacement which occurs in the LCD glass at the alignment process. Algor which is a FEM code for a framework simulation was applied. Temperature variation above ${\pm}$ $0.1^{\circ}C$ on mold and glass causes the horizontal displacement of 150nm due to thermal expansion. The vertical displacement due to the circular is ten times of the case of rectangular absorption nozzle. The displacement of the LCD glass in the alignment process is about 49nm.