• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.9
• /
• pp.577-587
• /
• 2016

Although the formation of oxy-fuel MILD combustion is considered one of the promising combustion technologies for high thermal efficiency, low emissions and stability have been reported as difficulties. In this paper, the effect of combustor geometry and operating conditions on the formation of oxy-fuel MILD combustion was analyzed using numerical simulation. The results show that the high temperature region and average temperature decreased due to an increase in oxygen inlet velocity; moreover, a high degree of temperature uniformity was achieved using an optimized combination of fuels and an oxygen injection configuration without external oxygen preheating. In particular, the oxy-fuel MILD combustion flame was found to be very stable with a combustion flame region at equivalence ratio 0.90, fuel velocity 10 m/s, oxygen velocity 200 m/s, and nozzle distance 33.5 mm.

• Journal of Soil and Groundwater Environment
• /
• v.20 no.5
• /
• pp.34-40
• /
• 2015

It is reported that the intensity of rainfall will likely increase, on average, over the world on 2000. For water resources security, many studies for flow paths from rainfall or snowmelt to subsurface have been conducted. In Korea, few isotopic studies for characterizations of flow path have been undertaken. For a better understanding of how water derived from atmosphere moves to subsurface and from subsurface to stream, an analysis of precipitation and stream water using oxygen-18 and deuterium isotopes in a small watershed, Dorim-cheon, Seoul, was conducted with high resolution data. Variations of oxygen-18 in precipitation greater than 10‰ (δ¹⁸O_max = −1.21‰, δ¹⁸O_min = −11.23) were observed. Isotopic compositions of old water (groundwater) assumed as the stream water collected in advance were −8.98‰ and −61.85‰ for oxygen and hydrogen, respectively. Using a two-component mixing model, hydrograph separation of the stream water in Dorim-cheon was conducted based on weighted mean value of δ¹⁸O. As a result, except of instant dominance of rainfall, contribution of old water was dominant during the study period. On average, 71.3% of the old water and 28.7% of rainfall contributed to the stream water. The results show that even in the small watershed, which is covered with thin soil layer in granite mountain region, the stream water is considerably influenced by old water inflow rather than rainfall.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.522-532
• /
• 2011

In Oriental medicine, the status of a tongue is the important indicator to diagnose the condition of internal organs in a body. A tongue diagnosis is not only convenient but also non-invasive, and therefore widely used in Oriental medicine. But tongue diagnosis has some problems that should be objective and standardized, it also exhaust the diagnosis tool that can help for oriental medicine doctor's decision-making. In this paper, to solve the this problem we propose a method that calculates the tongue geometry information for effective tongue diagnosis analysis. Our method is to extract the tongue region for using improved snake algorithm, and calculates the geometry information by using convex hull and In-painting. In experiment, our method has stable performance as 7.2% by tooth plate and 8.5% by crack in region difference ratio.

• Journal of Korea Multimedia Society
• /
• v.6 no.3
• /
• pp.409-418
• /
• 2003

Object tracking in video is one of subject that computer vision and several practical application field have interest in several years. This paper proposes real time object tracking and face region extraction method that can be applied to security and supervisory system field. For this, in limited environment that camera is fixed and there is seldom change of background image, proposed method detects position of object and traces motion using difference between input image and background image. The system creates adaptive background image and extracts pixels in object using line scan method for more stable object extraction. The real time object tracking is possible through establishment of MBR(Minimum Bounding Rectangle) using extracted pixels. Also, effectiveness for security and supervisory system is improved due to extract face region in established MBR. And through an experiment, the system shows fast real time object tracking under limited environment.

• Journal of the Korean Chemical Society
• /
• v.26 no.3
• /
• pp.117-127
• /
• 1982

In order to analyze the role of axial carbon atoms in rotational barrier of ethane, we take the carbonless ethane, as a model, which is made of six hydrogens in coordinates of ethane. The energy of the system is calculated by McWeeny's open-shell restricted Hartree-Foch selfconsistent-field (RHF-SCF) method, and the transition density on the staggered-to-eclipsed rotation is examined. As being expected, the eclipsed form of the model is more stable than the staggered one. Through the transition density comparison of this model and real ethane, it is found that the existence of the axial carbon atoms induces the electronic density to be diluted in the vicinity of protonic sites and to be attracted to the region of carbon atoms or further to C-C bond region as the barrier is traversed. This migration of electronic charge tell us that the barrier to the internal rotation of ethane originates from the fact that the magnitude of electronic energy depression is not large enough to offset the increased nuclear-nuclear repulsion on the staggered-to-eclipsed rotation.

• Journal of Environmental Science International
• /
• v.10 no.1
• /
• pp.59-64
• /
• 2001

The effect of major operating parameters in spray drying sorber(=SDS) for automatic control for the simultaneous removal of acidic and organic gaseous pollutants from solid waste incinerator was performed. The field experiment was carried out in pilot scale test for the quantification of major operating parameters of hydrophilic and the hydrophobic pollutants. The removal efficiencies of $SO_2$and HCI in the 5wt% slurry condition were being increased with the increase of the stoichiometric ration which is the molecular ratio of lime to the pollutant concentration, and with the decrease of inflow flue gas temperature in the pilot SDS reactor. The removal efficiency along the height of spray drying sorber was closely related to the temperature profile, and more than 90% of total removal efficiency was achieved in an absorption region. For the removal of acidic gas the optimum operating condition considering the economics and a stable operation is the 5wt% of slurry concentration, 1.2 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. For the organic gases of benzene and toluene the removal efficiencies were 20-60% which is much lower than that of acidic gas. The best removal efficiency was obtained at 1.5 of stoichiometric ratio and 25$0^{\circ}C$ of inflow flue gas temperature. The organic\`s removal efficiency along the height of spray drying sorber was quite different from that of acidic gas, that is, more than 60% of the total removal efficiency for benzene and 90% of the total removal for toluene were achieved in the dried adsorption region, which was formed at the lower or exit part of the reactor.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.1
• /
• pp.128-135
• /
• 2009

Techniques for tracking the same region of physical space with the temporal sequences of images by matching the contours of constant phase show robust and stable performance in relative to the tracking techniques using or assuming the constant intensity. Using this property, we describe an algorithm for obtaining the robust motion parameters caused by the global camera motion. First, we obtain the optical flow based on the phase of spacially filtered sequential images on the region in a direction orthogonal to orientation of each component of gabor filter bank. And then, we apply the least squares method to the optical flow to determine the affine motion parameters. We demonstrate hat proposed method can be applied to the vision based pointing device which estimate its motion using the image including the display device which cause lighting condition varieties and noise.

• Journal of the Korean Vacuum Society
• /
• v.13 no.3
• /
• pp.109-113
• /
• 2004

Zn diffusions in InP have been studied by electrochemical capacitance voltage. The InP layer was grown by metal organic chemical vapor deposition, and $Zn_3P_2$ thin film was deposited on the epitaxial substrates. The samples annealed in a rapid thermal annealing. It is demonstrated that surface hole concentration as high as $1\times10^{19}\textrm{cm}^{-3}$ can be achieved. When the Zn diffusion was carried at $550^{\circ}C$ and 5-20 min., the diffusion depth of hole concentration moves from 1.51$\mu\textrm{m}$ to 3.23 $\mu\textrm{m}$, and the diffusion coeffcient of Zn is $5.4\times10^{-11}\textrm{cm}^2$/sec. After activation, the concentration is two orders higher than that of untreated sample at 0.30 $\mu\textrm{m}$ depth. As the annealing time is increase, the hole concentration remains almost constant, except deep depth. It means that excess Zn interstitials exist in the doped region is rapidly diffusion into the undoped region and convert into substitutional When the thickness of $SiO_2$ thin film is above 1,000$\AA$, the hole concentration becomes stable distribution.

• Archives of Plastic Surgery
• /
• v.41 no.5
• /
• pp.493-499
• /
• 2014

Background Maintaining stability and restoring the aesthetic appearance are the fundamental goals when managing zygomatic fractures. We aimed to evaluate the stability and anthropometric outcomes of zygomatic fracture patients who underwent two-point fixation involving the infraorbital rim and zygomaticomaxillary buttress via the transconjunctival and gingivobuccal approaches without any skin incisions. Methods We examined 15 zygomatic fracture patients who underwent two-point fixation during a 3-year period. Stability was evaluated using three-dimensional facial bone computed tomography. Superoinferior and anteroposterior displacement of the zygoma was quantified. The aesthetic appearance of the periorbital region was evaluated using indirect anthropometry with standardized clinical photographs. The ratios between the eye fissure height and width, and lower iris coverage ratio were used to evaluate aesthetical changes. The bony displacement and aesthetic ratios were analyzed using Wilcoxon or Friedman tests. The correlation between the preoperative zygoma position and anthropometric values was analyzed. Results The positions of the zygoma were similar to those on the contralateral side at the long-term follow-up. The preoperative anthropometric measurements on the fractured side differed from those on the contralateral side, although these values were close to the normal values at the long-term follow-up. Furthermore, we noted that the anteroposterior displacement strongly positively correlated with the lower iris coverage rate (Spearman's coefficient=0.678, P=0.005). Conclusions Two-point fixation of zygomatic fractures achieved stable outcomes on long-term follow-up, and also appeared to be reliable in restoring the aesthetic appearance of the periorbital region.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.4
• /
• pp.269-279
• /
• 2005

Numerical simulations were done using depth integrated ADCIRC model in order to evaluate dynamic response on the inner Saemankeum reservoir due to flood flow and gate operation for the both situations of dike construction and inner development. According to 2-dimensional dynamic flood routing, temporal variation of hydrographs shows sensitive at upstream riverine region while it becomes stable from the center part of the reservoir due to sudden expansion of physical changes. Dynamic response of hydraulic changes such as water surface elevation and velocity on the inner region arises suddenly by gate operation and more rapidly after the inner development than dike construction. Temporal surface fluctuation arises during inflowging of outer sea water and propagates upstream up to 10km to 16km in accordance with inner development status.