• 호남수학학술지
• /
• 제30권3호
• /
• pp.411-423
• /
• 2008

In the field of population dynamics and chemical reaction the possibility or the existence of spatially and temporally nonhomogeneous solutions is a very important problem. For last 50 years or so there have been many results on the pattern formation of chemical reaction systems studying reaction systems with or without diffusions to explain instabilities and nonhomogeneous states arising in biological situations. In this paper we study time-dependent properties of a predator-prey system with functional response and give sufficient conditions that guarantee the existence of stable limit cycles.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.170-178
• /
• 2005

Multi-hole type oxygen combustion burner was developed for industrial gasification and smelting furnace. We investigated characteristics of flame, radiation transfer, and soot emission in the convectional oxygen burner with respect to the feeding condition of fuel and oxygen. Regarding the results of the conventional burner, we designed new burners which have larger fuel consumption rate and radiation heat transfer. We changed the size and hole number and shape of the exit plane of the burner. In addition, the performance of the burner was tested with respect to the feeding condition of the fuel and air: Normal Diffusion flame(NDF) and Inverse Diffusion Flame(IDF). We investigated the flame configuration, radiation heat transfer, and soot formation by using a CCD camera, heat flux meter, and Laser Induced Incadescence(LII), respectively. The stable operating condition was obtained by the flame configuration and the flame of the burner which has dented exit plane was more stable in whole operating conditions. The characteristics of radiative heat transfer were sensitive to the feeding condition of reactants and the flame of 75% primary oxygen and 25% secondary oxygen of the IDF case shows maximum radiation heat transfer. The soot volume fraction of the flame was measured in the axial direction of the flame and the amount of soot volume fraction is proportion to the radiation heat transfer. As a result, we can get the optimal operating condition of the newly designed burner which enhances the characteristics of flame stabilization and radiation heat transfer.

• 스마트미디어저널
• /
• 제12권7호
• /
• pp.76-83
• /
• 2023

본 연구에서는 웹툰 작가의 웹툰 제작 과정을 보조하기 위해 사전학습된 Text-to-Image 모델을 미세조정하여 텍스트에서 웹툰을 생성하는 방법을 제안한다. 제안하는 방법은 웹툰 화풍으로 변환된 웹툰 데이터셋을 사용하여 사전학습된 Stable Diffusion 모델에 LoRA 기법을 활용하여 미세조정한다. 실험 결과 3만 스텝의 학습으로 약 4시간 반이 소요되어 빠르게 학습하는 것을 확인하였으며, 생성된 이미지에서는 입력한 텍스트에 표현된 형상이나 배경이 반영되어 웹툰 이미지가 생성되는 것을 확인하였다. 또한, Inception score를 통해 정량적인 평가를 수행하였을 때, DCGAN 기반의 Text-to-Image 모델보다 더 높은 성능을 나타냈다. 본 연구에서 제안된 웹툰 생성을 위한 Text-to-Image 모델을 웹툰 작가가 사용한다면, 웹툰 저작에 시간을 단축시킬 수 있을 것으로 기대된다.

• 한국전기전자재료학회논문지
• /
• 제22권11호
• /
• pp.905-909
• /
• 2009

The new Junction Field Effect Transistors (JFETs) with Silicon-germanium (SiGe) layers is investigated. This structure uses SiGe layer to prevent out diffusion of boron in the channel region. In this paper, we report electrical properties of SiGe JFET measured under various design parameters influencing the performance of the device. Simulation results show that out diffusion of boron is reduced by the insertion SiGe layers. Because the SiGe layer acts as a barrier to prevent the spread of boron. This proposed JFET, regardless of changes in fabrication processes, accurate and stable cutoff voltage can be controlled. It is easy to maintain certain electrical characteristics to improve the yield of JFET devices.

• 한국경영과학회지
• /
• 제38권1호
• /
• pp.45-59
• /
• 2013

A long-term forecasting method for a new product in early stage of diffusion is proposed. The method includes a constrained non-linear least square estimation with the logistic diffusion model. The constraints would be critical market informations such as market potential, peak point, and take-off. Findings on 20 cases having almost full life cycle are that (i) combining any market information improves the forecasting accuracy, (ii) market potential is the most stable information, and (iii) peak point and take-off information have negative effect in case of overestimation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2001

An experiment using high preheated and swirled air in the coaxial diffusion flame burner was carried out in order to decrease NOx emission and improve the thermal efficiency. $N_2$ gas was used for diluent and propane was utilized for fuel. Combustion using high preheated air has two remarkable characteristics ; (1) low NOx emission with increasing dilution level, (2) high thermal efficiency in the furnace. Also, swirled air can mix fuel and oxidizer well in condition of diffusion flme and maintain the stable combustion. The color of flame changes from yellow to blue green according to increasing the dilution level of mixture gas. NO emission decreased with increasing dilution level and the swirl number.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제52권10호
• /
• pp.451-457
• /
• 2003

The silicon wafer is stable status at room temperature, but it is weak at high temperatures which is necessary for it to be fabricated into a power semiconductor device. During thermal diffusion processing, a high temperature produces a variety thermal stress to the wafer, resulting in device failure mode which can cause unwanted oxide charge or some defect. This disrupts the silicon crystal structure and permanently degrades the electrical and physical characteristics of the wafer. In this paper, the electrical characteristics of a single oxide layer due to high temperature diffusion process, wafer resistivity and thickness of polyback was researched. The oxide quality was examined through capacitance-voltage characteristics, defect density and BMD(Bulk Micro Defect) density. It will describe the capacitance-voltage characteristics of the single oxide layer by semiconductor process and device simulation.

• 대한조선학회지
• /
• 제19권4호
• /
• pp.19-29
• /
• 1982

Galerkin's finite element method is applied to a two-dimensional heat convection-diffusion problem arising in the hydrodynamic lubrication of thrust bearings used in naval vessels. A parabolized thermal energy equation for the lubricant, and thermal diffusion equations for both bearing pad and the collar are treated together, with proper juncture conditions on the interface boundaries. it has been known that a numerical instability arises when the classical Galerkin's method, which is equivalent to a centered difference approximation, is applied to a parabolic-type partial differential equation. Probably the simplest remedy for this instability is to use a one-sided finite difference formula for the first derivative term in the finite difference method. However, in the present coupled heat convection-diffusion problem in which the governing equation is parabolized in a subdomain(Lubricant), uniformly stable numerical solutions for a wide range of the Peclet number are obtained in the numerical test based on Galerkin's classical finite element method. In the present numerical convergence errors in several error norms are presented in the first model problem. Additional numerical results for a more realistic bearing lubrication problem are presented for a second numerical model.

• 대한수학회지
• /
• 제49권4호
• /
• pp.715-731
• /
• 2012

This paper considers the stability of positive steady-state solutions bifurcating from the trivial solution in a delayed Lotka-Volterra two-species predator-prey diffusion system with a discrete delay and subject to the homogeneous Dirichlet boundary conditions on a general bounded open spatial domain with smooth boundary. The existence, uniqueness and asymptotic expressions of small positive steady-sate solutions bifurcating from the trivial solution are given by using the implicit function theorem. By regarding the time delay as the bifurcation parameter and analyzing in detail the eigenvalue problems of system at the positive steady-state solutions, the asymptotic stability of bifurcating steady-state solutions is studied. It is demonstrated that the bifurcating steady-state solutions are asymptotically stable when the delay is less than a certain critical value and is unstable when the delay is greater than this critical value and the system under consideration can undergo a Hopf bifurcation at the bifurcating steady-state solutions when the delay crosses through a sequence of critical values.

• Journal of applied mathematics & informatics
• /
• 제40권3_4호
• /
• pp.491-505
• /
• 2022

This paper is concerned with singularly perturbed convection-diffusion parabolic partial differential equations which have time-delayed. We used the Crank-Nicolson(CN) scheme to build a fitted operator to solve the problem. The underling method's stability is investigated, and it is found to be unconditionally stable. We have shown graphically the unstableness of CN-scheme without fitting factor. The order of convergence of the present method is shown to be second order both in space and time in relation to the perturbation parameter. The efficiency of the scheme is demonstrated using model examples and the proposed technique is more accurate than the standard CN-method and some methods available in the literature, according to the findings.