• The Mathematical Education
• /
• v.38 no.2
• /
• pp.165-172
• /
• 1999

$\sub$e/$\^$2/, that were results from those three sources of such imperfection. Especially to eliminate the differences in severity among many raters the randomization procedure of raters sample was very effective in enhancing the reliability of ratings with comparatively small groups of examinees and raters. And we also introduced the new rating methods, i.e. the 2-step diagnostic procedures to check the sizes of the reliability stability of raters and the sore adjustment method to enumerate the optimal mean values in rating the examinees.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.240-246
• /
• 2005

A series of combustion tests of a 30-tonf-class full scale liquid rocket thrust chamber under development has been carried out to verify its design. The test results revealed decent performance in the aspects of efficiency. The combustion stability is one of the most important parameters of liquid rocket engine in addition to the efficiency. Assessment tests of combustion stability must be accomplished to confirm the possibility of combustion instability due to spontaneous or external disturbances. The combustion stability rating tests of the full scale thrust chamber with temporary baffles made of stainless steel were carried out utilizing pulse guns to estimate combustion stability characteristics. The tests results show highly stable combustion stability characteristics. The outcome acquired from the present experimental study will be used to design an actively cooled baffle that can survive for the life time operation of the thrust chamber.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.188-196
• /
• 2004

To optimize and limit the axial length of baffle in KSR-III engine, stability rating tests using pulse gun as one of artificial disturbance devices have been done. Decay time and other parameters for the evaluation of stabilization ability of engine to external perturbation have been analyzed to quantify stabilization capacity of engine, in other words, dynamic stability margin. If baffle does not cover flame zone enough which can be considered as collision region of injector, it wasn't be able to suppress external perturbation sufficiently. The limit of combustion stability margin of engine is assumed to be 50 mm length baffle.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.467-472
• /
• 2020

Methods for deriving design input-parameters to ensure the stability of a structure on a common ground are generally well known. Folded metamorphic rocks, such as the study area, are highly foliated and have small faults parallel to the foliation, resulting in special research methods and tests to derive design input parameters, Etc. are required. The metamorphic rock ground with foliation development of several mm intervals has a direct shear test on the foliation surface, the strike/dip mapping of the foliation, the boring investigation to determine the continuity of the foliation, and the rock mass rating of the metamorphic rock. etc. are required. In the case of a large number of small foliation-parallel faults developed along a specific foliation plane, it is essential to analyze the lineament, surface geologic mapping for fault tracing, and direct shear test. Folded ground requires additional geological-structural-domain analysis, discontinuity analysis of stereonet, electrical resistivity exploration along the fold axis, and so on.

• Journal of the Korean Society of Costume
• /
• v.39
• /
• pp.79-89
• /
• 1998

This study was carried out the effect of stability and color extract for it's condition in the curcuma L.. dyeing. The stability is to investigate the absorbance of the curcumin, one of the major yellow pigments and the stability regarding the effect of light, oxygen temperature and pH. The dyeing condition is compared the effect of mordanting condition and the best way to extract pigment and analysed through the color-fastness rating, color-difference value test. The main results obtained are summarized as follows ; 1.The best and proper solvent to extrect curcumin pigment was a ethanol and a distilled water. 2. The light effect indicated that the absorbances of solution in absence of ligh was more stable. 3. The oxygen(O2) effect to curcumin show-ed that the condition in the absence of O2 was more stable than that in presence of O2 4. The temperature showed that the absorbnace was best stable in4$^{\circ}C$ and less changed at $25^{\circ}C$ 5. The curcumin-etanol solution was stable in pH 2~4. 6. Generally color-fastness rating to silk, wool and cotton indicated that crocking C.F. and perspiration C.F. were more than 3rd grade and dry cleaning C.F. was more than 4th grade. But light color-fastness and washing color-fastness were very poor. 7. To make good color fastness, the mordan-ting treated group and the pre-mordant conditions were more effective than others 8. When compared with color-difference value test indicated that the silk was looks like more reddish and bluish color and than the wool and cotton were greenish and bluish. As a mordant, A(C2H4OH(COOH3) and D(K2Cr2O7)were more effective to make green-ish color in the silk and the reddish color was abtained by B(Al.K(SO4)2.12H2O) and C(FeSO4.7H2O).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.5
• /
• pp.15-20
• /
• 2009

Hot-firing tests were performed on two 30 tonf-class regenerative cooling combustion chambers, with different injector distribution and wall cooling method. In the paper, the combustion stability test results were analyzed and presented. The pressure fluctuation and stability rating test(SRT) results of the combustion chambers were examined to evaluate combustion stability. The combustion chambers exhibited satisfactory results on combustion stability. The RMS values of the chamber pressure fluctuation were less than 3% of the chamber pressure and the decay time of artificial pressure peaks was measured to be around 10% of the reference decay time. It is interesting that the RMS values of pressure fluctuation in the combustion chamber with film cooling are smaller than those in the chamber with cooling injectors at the periphery row.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.79-87
• /
• 2003

Application of combustion stabilization devices such as baffle and acoustic cavity to liquid propellant rocket engine is investigated to suppress high-frequency combustion instability, i.e., acoustic instability. First, these damping devices are designed based on linear damping theory. As a principal design parameter， damping factor is considered and calculated numerically in the chambers with/without these devices. Next, the unbaffled chambers with/without acoustic cavities are tested experimentally for several operating conditions. The unbaffled chamber shows the peculiar stability characteristics depending on the operating condition and it is found to have small dynamic stability margin. As a result, the acoustic cavity with the present design has little stabilization effect in this specific chamber. Finally， stability rating tests are conducted with the baffled chamber, where evident combustion stabilization is observed, which indicates sufficient damping effect.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.133-144
• /
• 1998

International capital movement has made progress at global liberalization of finance and foreign exchange, international monetary norm changing into floating exchange rate system, easiness of collection of information and trade at improvement of information communication technology from early of 1970's. Results of empirical test for relation between foreign exchange rate or various determination factors of foreign exchange rate and interest rate are followed by next sentences. First, according to relation between foreign exchange rate and interest rate, correlation for each of variables after OECD entrance is increased. But, long-term & short-term interest rate is affected by Hanbo & Kia's bankruptcy, continuous large scale corporates bankruptcy and crisis of foreign exchange. Therefore, financial instability is occured. If portfolio investment fund has been inflow as it is mollified by continuous shortage of foreign exchange and fall of country's credit rating, it is expected to have positive effect for long-term & short-term interest rate from appreciation of won against dollar. Second, results from relation between determination factor of foreign exchange rate and interest rate are followed by next sentences. If surplus of current account and goods account is continued, yield of corporate bond is to be stable. But, margin of surplus is expected to diminish after second quarter 98, and difference between external and domestic interest (after adjusting foreign exchange rate) is to be diminished. And if net inflows of foreign investor's fund (stock and bond) is diminished, it is to have negative effect for yield of corporate bond. According to foreign investor's investment movement of previous years, hedge fund were stayed at least during two years in Mexico. It means that sudden capital outflow is not to be happened at Korea. But if external factors from depreciation of yen and China's renminbi are instable, interest rate is expected to increase from capital's outflows. Third, if it is to decrease instability of foreign exchange rate from increase in surplus of future current account, credit rating's upwardness, stability of yen and renminbi, foreign exchange rate is expected to be stable. It is expected to have continuous stability from short-term interest rate to long-term interest rate in this empirical test.

• Proceedings of the Safety Management and Science Conference
• /
• 2002.11a
• /
• pp.305-319
• /
• 2002

International capital movement has made progress at global liberalization of finance and foreign exchange, international monetary norm changing into floating exchange rate system, easiness of collection of information and trade at improvement of information communication technology from early of 1970's. Results of empirical test for relation between foreign exchange rate or various determination factors of foreign exchange rate and interest rate are followed by next sentences. First, according to relation between foreign exchange rate and interest rate, correlation for each of variables after OECD entrance is increased. But, long-term ＆short-term interest rate is affected by Hanbo ＆ Kia's bankruptcy, continuous large scale coporates bankruptcy and crisis of foreign exchange. Therefore, financial instability is occured. If portfolio investment fund has been inflow as it is mollified by continuous shortage of foreign exchange and fall of country's credit rating, it is expected to have positive effect for long-term & short-term interest rate from appreciation of won against dollar. Second, results from relation between determination factor of foreign exchange rate and interest rate are followed by next sentences. If surplus of current account and goods account is continued, yield of corporate bond is to be stable. But, margin of surplus is expected to diminish after second quarter 98, and difference between external and domestic interest (after adjusting foreign exchange rate) is to be diminished. And if net inflows of foreign investor's fund (stock and bond) is diminished, it is to have negative effect for yield of corporate bond. According to foreign investor's investment movement of previous years, hedge md were stayed at least during two years in Mexico. It means that sudden capital outflow is not to be happened at Korea. But if external factors from depreciation of yen and China's renminbi are instable, interest rate is expected to increase from capital's outflows. Third, if it is to decrease instability of foreign exchange rate from increase in surplus of future current account, credit rating's upwardness, stability of yen and renminbi, foreign exchange rate is expected to be stable. It is expected to have continuous stability from short-term interest rate to long-term interest rate in this empirical test.

• Information Systems Review
• /
• v.20 no.4
• /
• pp.79-96
• /
• 2018

This study started by focusing on the internalization of the technology appraisal model into the credit rating model to increase the discriminative power of the credit rating model not only for SMEs but also for all companies, reflecting the items related to the financial stability of the enterprises among the technology appraisal items. Therefore, it is aimed to verify whether the technology appraisal model can be applied to identify high-stability SMEs in advance. We classified companies into industries (manufacturing vs. non-manufacturing) and the age of company (initial vs. non-initial), and defined as a high-stability company that has achieved an average debt ratio less than 1/2 of the group for three years. The C5.0 was applied to verify the discriminant power of the model. As a result of the analysis, there is a difference in importance according to the type of industry and the age of company at the sub-item level, but in the mid-item level the R&D capability was a key variable for discriminating high-stability SMEs. In the early stage of establishment, the funding capacity (diversification of funding methods, capital structure and capital cost which taking into account profitability) is an important variable in financial stability. However, we concluded that technology development infrastructure, which enables continuous performance as the age of company increase, becomes an important variable affecting financial stability. The classification accuracy of the model according to the age of company and industry is 71~91%, and it is confirmed that it is possible to identify high-stability SMEs by using technology appraisal items.