• 제목/요약/키워드: Stability Rating

검색결과 147건 처리시간 0.022초

Assessment of rock slope stability by slope mass rating (SMR): A case study for the gas flare site in Assalouyeh, South of Iran

  • Azarafza, Mohammad;Akgun, Haluk;Asghari-Kaljahi, Ebrahim
    • Geomechanics and Engineering
    • /
    • 제13권4호
    • /
    • pp.571-584
    • /
    • 2017
  • Slope mass rating (SMR) is commonly used for the geomechanical classification of rock masses in an attempt to evaluate the stability of slopes. SMR is calculated from the $RMR_{89-basic}$ (basic rock mass rating) and from the characteristic features of discontinuities, and may be applied to slope stability analysis as well as to slope support recommendations. This study attempts to utilize the SMR classification system for slope stability analysis and to investigate the engineering geological conditions of the slopes and the slope stability analysis of the Gas Flare site in phases 6, 7 and 8 of the South Pars Gas Complex in Assalouyeh, south of Iran. After studying a total of twelve slopes, the results of the SMR classification system indicated that three slope failure modes, namely, wedge, plane and mass failure were possible along the slopes. In addition, the stability analyses conducted by a number of computer programs indicated that three of the slopes were stable, three of the slopes were unstable and the remaining six slopes were categorized as 'needs attention'classes.

KSR-III 로켓엔진의 연소 안정성 평가 (Stability Rating of KSR-III Rocket Engine)

  • 손채훈;김영목
    • 한국항공우주학회지
    • /
    • 제32권3호
    • /
    • pp.95-101
    • /
    • 2004
  • 액체 로켓엔진 개발과정에서 수행되는 여러 가지 시험 중 연소 안정성 평가 시험을 통해, KSR-III 로켓엔진의 연소 안정성을 평가하였다. 안정성 평가시험에서, 엔진이 외부 교란에 의한 압력 진동을 감쇠시켜 본래의 안정한 연소를 회복하는 경우, 그 엔진은 연소 안정 화 능력을 가지고 있다고 판정할 수 있다. 로켓엔진은, 교란의 크기를 예측하기 어려운 외부 섭동에 노출될 수 있으므로, 연소 안정화 가능 여부를 확인하는 것과 더불어 엔진이 갖고 있는 연소 안정화 성능을 정량화하여 파악하는 작업이 필요하다. 이를 위해 몇 가지 주요 인자를 도입하였고, 이를 평가하는 방법을 검토하였다. 성공적으로 완료된 KSR-III 로켓 개발과정에서 로켓엔진의 안정성 확보를 위해 6회의 안정성 평가 시험이 수행되었다. 이를 토대로, 연소 안정화 성능의 정량화 방법을 KSR-III 엔진에 적용하여 엔진의 안정화 성능을 분석하였다.

액체 로켓엔진의 연소 안정성 평가 (Stability Rating of Liquid Propellant Rocket Engine)

  • 손채훈;김영목
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2003년도 제21회 추계학술대회 논문집
    • /
    • pp.73-77
    • /
    • 2003
  • 액체 로켓엔진 개발과정에서 수행되는 여러 가지 시험 중 연소 안정성 평가 시험을 통해, KSR-III 로켓엔진의 연소 안정성을 평가하였다. 안정성 평가시험에서, 엔진이 외부 교란에 의한 압력 진통을 감쇠시켜 본래의 안정한 연소로 회복되는 경우, 그 엔진은 연소 안정화 능력을 가지고 있다고 판정할 수 있다. 로켓엔진은, 교란의 크기를 예측하기 어려운 외부 섭동에 노출될 수 있으므로, 엔진의 연소 안정화 가능 여부를 확인하는 것과 더불어 엔진이 갖고 있는 연소 안정화 능력을 정량화하여 파악하는 작업이 필요하다. 이를 위해 몇 가지 인자를 도입하였고, 이를 평가하는 방법을 검토하였다. 성공적으로 완료된 KSR-III 로켓개발과정에서 로켓엔진의 안정성 확보를 위해 5회의 안정성 평가 시험이 수행되었다. 이를 토대로, 앞서 언급한 안정화 능력의 정량화 방법을 KSR-III 엔진에 적용하여 그 엔진의 안정화 성능을 분석하였다.

  • PDF

공기분사 기법을 이용한 충돌형 제트 분사기의 연소 안정성 평가에 관한 수치적 연구 (A Numerical Study on Combustion-Stability Rating of Impinging-Jet Injector Using Air-Injection Technique)

  • 손채훈;박이선
    • 대한기계학회논문집B
    • /
    • 제30권11호
    • /
    • pp.1093-1100
    • /
    • 2006
  • Combustion stability rating of jet injector is conducted numerically using air-injection technique in a model chamber, where air is supplied to oxidizer and fuel manifolds of the model five-element injector head. A sample F(fuel)-O(oxidizer)-O-F impinging-jet injector is adopted. In this technique, we can simulate mixing process of streams flowing through oxidizer and fuel orifices under cold-flow condition without chemical reaction. The model chamber was designed based on the methodologies proposed in the previous work regarding geometrical dimensions and operating conditions. From numerical data, unstable regions can be identified and they are compared with those from air-injection acoustic and hot-fire tests. The present stability boundaries are in a good agreement with experimental results. The proposed numerical method can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

단양 석회석 광산터널의 암반 평가 및 안정성 연구 (Study on the stability of tunnel and rock mass classification in Danyang limestone quarry)

  • 신희순
    • 터널과지하공간
    • /
    • 제6권2호
    • /
    • pp.131-143
    • /
    • 1996
  • In-situ survey and laboratory rock test were carried out for rating rock mass around the tunnel that some failures had been occurred in Danyang limestone quarry. For rating rock mass, several methods such as RMR, Q-system, rock strength etc. were applied. The stability analysis on tunnel was evaluated by numerical method FLAC. And The block theory using streographic projection was also applied for stability analysis. The 3-4 major discontinuity sets are distributed in rock mass around tunnel.

  • PDF

연소해석을 이용한 충돌형 제트분사기의 연소 안정성 평가에 관한 수치적 연구 (A Numerical Study on Combustion-Stability Rating of Impinging-Jet Injectors Using Hot-Fire Simulation)

  • 최효현;손채훈
    • 한국추진공학회지
    • /
    • 제14권5호
    • /
    • pp.24-31
    • /
    • 2010
  • 충돌형 분사기가 장착된 모델 연소실에서 연소장 수치 해석을 이용하여 연소 안정성을 평가하였다. 충돌형 분사기로는 F(fuel)-O(oxidizer)-O-F형 분사기를 채택하였다. 본 연구에서는 연료와 산화제의 제트 혼합과정이 지배적이라는 가정하에 순간 화학 반응 모델을 채택하여 수치해석을 수행하였다. 선행 연구를 통해 제안된 방법론을 토대로 모델 연소실 형상이 설계되고 연소실 작동 조건이 결정되었다. 본 연구에서 제시한 방법을 토대로 얻은 연소 안정성 경계는 공기 분사 음향 실험과 연소 실험결과와 정성적으로 잘 일치하였다. 연료와 산화제의 분사와 혼합이 연소 불안정 유발에 지배적인 경우, 본 연구에서 제안된 수치해석 기법을 이용하여 효과적으로 분사기의 연소 안정성을 평가할 수 있다.

75톤급 액체로켓엔진 연소기의 저압 조건에서 수행된 연소안정성 시험 (Combustion Stability Rating Test under Low Pressure Condition of a 75-$ton_f$ LRE Thrust Chamber)

  • 이광진;강동혁;김문기;안규복;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제34회 춘계학술대회논문집
    • /
    • pp.231-238
    • /
    • 2010
  • 75톤급 기술검증용 연소기의 저압 조건 연소안정성 시험이 수행되었다. 동일한 추진제 유량을 연소실에 공급하면서 분사기 수량이 감소된 연소기 헤드의 경우 연소압력 30 bar에서 자발 불안정이 발생하였으나, 분사기 수량이 증가된 연소기 헤드에서는 동일한 연소압력 조건에서 고주파 연소안정성이 유지됨을 보였다. 30 bar에서 연소안정성을 보인 연소기 헤드는 연소압력 20 bar에서 자발 불안정이 발생하여 안정성 경계 영역을 보여주었다.

  • PDF

액체로켓엔진 연소기 연소안정성 평가시험 (Combustion Stability Rating Test of Liquid Rocket Engine Thrust Chamber)

  • 안규복;김종규;최환석
    • 한국추진공학회지
    • /
    • 제18권2호
    • /
    • pp.60-66
    • /
    • 2014
  • 액체로켓엔진 연소기의 연소안정성을 평가하기 위한 방법으로 연소 시 외부 교란을 공급하여 안정성 특성을 확인하는 방법이 사용된다. 본 논문에서는 연소기의 연소안정성 평가시험을 위한 펄스건 기폭시험에 대한 연구를 수행하였다. 비연소조건에서 펄스건 기폭시험을 수행하여 압력파의 강도를 확인함으로써 펄스건의 장약량을 결정하였다. 동일한 연소기 헤드에서 펄스건이 적용되지 않은 14번의 연소시험 동안 연소불안정이 나타나지 않았지만, 펄스건이 적용된 두 번의 탈설계점 조건에서는 연소불안정 현상이 발생하였다. 이로부터 펄스건을 이용한 기폭시험이 연소안정성 평가의 방법이 될 수 있음을 확인하였으며, 연소안정성 판정을 위한 연소시험 횟수를 줄일 수 있는 방법임을 제시하였다.

모형 연소실에서 분사기 연소 안정성 평가에 관한 실험적 연구 (A Experimental Study on Combustion-Stability Rating in a Subscale Chamber)

  • 김철진;손채훈
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2012년도 제44회 KOSCO SYMPOSIUM 초록집
    • /
    • pp.77-78
    • /
    • 2012
  • To predict combustion instability in actual full-scale combustion chamber of rocket engines, air-injection test is proposed with scaling techniques. From the data, damping factors have been obtained as a function of hydraulic parameter and the data give us instability map. Two instability regions are presented and it is found that they coincide reasonably with them from hot-fire test with full-scale flow rates. Accordingly, the proposed approach can be applied cost-effectively to stability rating of jet injectors when mixing of fuel and oxidizer jets is the dominant process in instability triggering.

  • PDF

강사장교 주요부재의 내하율 산정 (Evaluation of Rating Factor for Main Components in Steel Cable-Stayed Bridges)

  • 최동호;유훈;신재인;송원근
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제10권6호
    • /
    • pp.163-176
    • /
    • 2006
  • 본 논문에서는 사장교 주요부재인 거더와 주탑 및 케이블의 내하율을 평가하기 위한 식을 제안하였다. 응력 및 안정성 검토식을 이용하여 강사장교 거더와 주탑에 적용 가능한 내하율 산정식을 제안하였고 케이블의 내하율 산정식을 제안하였다. 영향선해석을 수행하여 사장교 각 부재에 인장력 최대, 압축력 최대 및 정/부 모멘트 최대의 경우에 활하중 재하 형태를 결정하였고 각 부재의 내하율 산정절차를 정리하였다. 제안된 내하율 산정방법의 타당성을 검증하기 위하여 실교량 모델인 돌산대교에 대한 적용예를 제시하였다. 일반교량의 내하율 산정방법은 돌산대교 거더와 주탑의 내하율을 과대 평가 하였으며, 제안된 내하율 산정방법은 축력과 모멘트를 동시에 지지하는 사장교 거더와 주탑의 거동을 적절히 반영하였다.