• The Korean Journal of Quaternary Research
• /
• v.5 no.1
• /
• pp.15-31
• /
• 1991

A total of 90 surface sediment samples, collected from the continental margin area bordering east and southeast coast of Korea, were subject to the geochemical analyses with the aim of filling the gap in our knowledge of this environment. The analyzed items included the major elements (Al, Fe, Mg, Ca, K, Na, p and Mn), organic carbon, and some trace metals (Ba, Co, Cu, Sr and Zn). The sediment grain-size exerted a predominant influence on the contents of most elements, with the exceptions of Ca, K, Sr and Ba. The Ca and Sr contents, being closely interrelated each other, were mainly controlled by the calcium carbonate content. The K content, on the other hand, appeared to be influenced by both illite and feldspar. The Ba content showed a certain relationship with that of K, suggesting a common source of these two elements; potassium feldspar. The R-mode factor analysis result also reaffirmed the above-mentioned controlling factors on the sediment geochemistry. The grain-size dependency of trace metals obscures their areal distribution pattern from the total contents. However, with the metal/aluminum ratios we could differentiate the subtle difference in the metal enrichment. Hence, sediments of the southern coastal area appear to receive some anthropogenic inputs of metals, though the effect is still negligible.

• Electrical & Electronic Materials
• /
• v.10 no.5
• /
• pp.440-446
• /
• 1997

This research has been performed for the fabrication of high quality ferrite plastic magnet. The magnetic properties of S $r_{5.9}$F $e_2$ $O_3$ ferrite bonded magnets by injection moulding with a variety of applied magnetic field were investigated. 0.3wt% CaCO3, 0.2wt% $SiO_2$, 0.5wt% $Al_2$ $O_3$and 0.5wt% N $a_2$ $SiO_3$are added in order to improve the magnetic properties of Sr-ferrite plastic magnets during the powder fabrication. For carbon coating on chemical compound specimen, 5wt% polyvinyl alcohol is added, and then calcinated under $N_2$ environment of 12$25^{\circ}C$. The particle size is distributed from 0.9~1.2${\mu}{\textrm}{m}$ which approximates to the single domain. The obtained Sr ferrite powder is well mixed with silane coupling and calcium stearate of 1wt%. Nest, the specimen is pelleted after kneading each of them with polyamidel2 as a binder. When the temperature of injection and mould were 25$0^{\circ}C$ and 8$0^{\circ}C$ respectively at injection pressure of 200kgf/$\textrm{cm}^2$, the degree of orientation was 85.3% under the applied magnetic field of 12kOe. As the results, when the packing density of Sr ferrite powder was 90wt%, the magnetic properties of Sr ferrite bonded magnet were follows : $_{B}$ $H_{c}$=2.41kOe, Br=3.1kG, (BH)$_{max}$=2.21MgOe. Especially, the Sr-ferrite bonded magnet with 10wt% N $d_2$F $e_{14}$B additive were as follows : $_{B}$ $H_{c}$=2.57kOe, Br=3.14kG and (BH)$_{max}$=2.39MGOe.GOe.GOe.GOe.e.

• Korean Journal of Clinical Pharmacy
• /
• v.14 no.2
• /
• pp.78-84
• /
• 2004

Nifedipine, one of calcium channel antagonists, has been used for the treatment of mild to moderate hypertention, angina pectoris, Raynaud's phenomenon and various other cardiovascular diseases. Because of its short biological half-life, several sustained-release (SR) formulations of nifedipine have been developed. and used clinically. The bioequivalence of the two nifedipine SR preparations was evaluated according to the guidelines of KFDA. The test product was Hanmi Nifedipine SR $tablet^{(R)}$ made by Hanmi Pharm. Co. and the reference was Adalat Oros $tablet^{(R)}$ made by Bayer Korea. Thirty healthy male subjects were divided into two groups and a randomized $2\times2$ cross-over study was employed. After one SR tablet containing 33 mg of nifedipine was orally administered, blood sample was taken at predetermined time intervals and the concentrations of nifedipine in plasma were determined using a validated HPLC method with UV detector. Two pharmacokinetic parameters, $AUC_t\;and\;C_{max}$, were calculated and analyzed statistically for the evaluation of bioequivalence of the two products. Analysis of variance was carried out using logarithmically transformed parameter values. The $90\%$ confidence intewals of the $AUC_t\;and\;the\;C_{max}\;were\;log\;0.81\sim1og\;1.19\;and\;log\;0.84\sim\;log\;1.13,\;respectively.$ These values were within the acceptable bioequivalence intervals from log 0.8 to log 1.25 in KFDA guidelines. Thus, the criteria of the KFDA guidelines for the bioequivalence was satisfied, indicating that Hanmi Nifedipine SR tablet is bioequivalent to Adalat Oros tablet.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.1
• /
• pp.27-35
• /
• 2001

The charnockite of Jirisan area occurs within the Precambrian high grade metamorphic terrane associated with anorthosite body as many foreign examples. Sm-Nd ages were determined from whole rock-garnet pairs, which turned out $1827\pm$32($2\sigma$) Ma for the massive charnockite and $1820\pm$22(2$\sigma$) Ma for the foliated charnockite with $$\varepsilon$_{Nd}(T)$ of $-5.5\pm$0.2 and $-6.0\pm$0.5 respectively. $^{87}Sr/^{86}Sr$ initial ratios calculated with the these ages are 0.71319 and 0.71532 respectively. The fact that massive and foliated charnockites show identical age, identical Nd isotopic initial ratio, and similar Sr isotopic initial ratios suggest that they were generated at the same time from the same material even through their present textures are different. Initial ratios of Nd and Sr of the charnockites are quite distinct from the mantle values indicating the influence of continental crust. Sm-Nd age determined from the titanium bearing anorthositic rocks intruding the anorthosite body, using mineral separates of garnet, plagioclase, and mafic fraction, is $1792\pm$90(2$\sigma$) Ma with $$\varepsilon$_{Nd}(T)=-3.9$\pm$0.2$. The ^${87}Sr/^{86}Sr$ initial ratios calculated with this age are 0.70616~0.70619. The charnockites and the anorthositic rocks occurring in contact each other also reveal the same age within the error, which suggest a genetic relationship between them. However, chemical compositions of the charnockites and Hadong-Sancheong anorthosites cannot be explained by igneous differentiation. Their differences in Nd and Sr initial isotopic ratios indicate different source materials. Therefore, temporal association between them suggests the possibility of the anorthosite acting as a thermal source for the generation of the charnockite as other studies.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.90-90
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode($Pt/Ti.SiO_2/Si$) using RF sputtering method. The dielectric constant of SBN thin films were increased with the increase of annealing temperature. The maximum dielectric constant of SBN thin film is obtained by annealing at 700[$^{\circ}C$]. The dielectric constant and dielectric loss had a stable value within -5~+5[V].

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.693-694
• /
• 2004

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.06a
• /
• pp.166-167
• /
• 2006

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2174-2181
• /
• 2024

In this work, Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics were prepared via in-situ synthesis process, which is a potential novel nuclear waste form for immobilizing the fission product ⁹⁰Sr and the trivalent actinide radionuclides in high-level waste (HLW). And the preparation technology, microstructure and chemical durability of Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics were systematically investigated. It was confirmed that the optimum microwave-sintering temperature (1050 ℃) and heat preservation time (1.5 h) is estimated by Archimedes method. Besides, the as-prepared samples that were consisted of strontium zirconium phosphate (SrZP) and monazite showed the remarkable densification, in which the two crystalline phases were intermixed well with each other. Meanwhile, the formation and evolution of microstructure was also consistent with the variational rule of Sr_0.5Zr₂(PO₄)₃/SmPO₄, indicating that there was not mutual reaction during the in-situ synthesis process. The PCT and MCC-1 experimental results demonstrated that the elemental normalized leaching rates of tested samples are all at a low level (LR_Sr ~10^-4 g·m^-2·d^-1, LR_Zr ~10^-8-10^-6 g·m^-2·d^-1, LR_Sm ~10^-7-10^-5 g·m^-2·d^-1 and LR_P ~10^-4 g·m^-2·d^-1). It is indicated that Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics possesses excellent chemical durability for HLW disposal.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.54-59
• /
• 2003

Several radionuclides are considered as an object of the assesment to develop a scaling factor and a periodical verification method which are needed for the evaluation of radionuclide inventory of various radioactive wastes from nuclear power plants in Korea. A selective separation of $^{55}Fe$, $^{90}FSr$ 및 $^{94}Nb$ which should be recovered individually for the radiochemical analysis was described in detail. Sorption and desorption behaviours of ion exchange and extraction chromatographic resins for Fe, Sr, Nb and co-existing metal ions were Investigated using an artificial waste solution simulated of chemical composition of real radioactive wastes. Separation conditions available for the sequential recovery of these metal ions from a single sample were optimized to minimize a discharge of radioactive wastes produced through the analytical process and a radiation exposure to analysts. Their recovery yields were measured with reliability.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.52-57
• /
• 2004

In order to analyze key parameters of important radionuclides in dose evaluation model of decommissioning site, a sensitivity analysis was performed. This analysis assumed a resident farmer for an exposure scenario and 0.037Bq/g for the concentration of radionuclides. As a result of sensitivity analysis, the key parameters of radionuclides considered were the area of contaminated zone, external gamma shielding factor and indoor time fraction for Cs-137 and Co-60. The key parameters for C-14 were the environmental parameters and hydrological parameters of unsaturated zone. Also, the key parameter for Sr-90 was the density of contaminated zone.