• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.234-244
• /
• 2017

Natural frequencies of immersed square sections decrease due to a contribution of added mass to the movement of square sections. In this study, natural frequencies of square sections are obtained as a function of gap size between the square section and a rigid square wall using the finite element method. Additionally, they are used to extract the added mass effect on translational and rotation motions. Published information and studies on the translational and torsional vibration of square beams are also examined for practical use. D coupling of a square section is also investigated for multiple square sections. The suggested added mass estimation can be applicable to the spent fuel storage design of a pressurized light water modulated nuclear power plant.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 봄 학술대회 발표논문집 디자인 학 연구
• /
• pp.24-25
• /
• 1998

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2006년도 ISMP 2006
• /
• pp.293-316
• /
• 2006

[ $\blacksquare$ ] I/O Signal $\square$ We see adequate margin for the RC B design $\square$ Minimum ODW value is 328ps using Ac to DC measurement for the read case. $\square$ Minimum ODW value is 350ps using AC to DC mesurement method for the write case. $\blacksquare$ CLK Signal $\square$ The slew-rate decreases when the Cterm value increases $\square$ Lower slew-rate could effect delay and jitter. $\square$ There are some ldge issues during transitions with lower Cterm and without Cterm. $\square$ Our recommendation for the Cterm value range is between 1.5pF to 2.4pF. $\blacksquare$ ADD/CMD/Ctrl Signal $\square$ High output slew-rate at low VDD causes ring back that reduces voltage margin because of x-talk. $\square$ 30ohm Rterm for the CTRL signal shows a better signal integrity result compared to 36ohm.

• 한국자기학회지
• /
• 제12권6호
• /
• pp.224-230
• /
• 2002

직경 200mm의 실리콘 기판에 균일한 코발트 금속박막을 증착하는 DC-스퍼터 장비에서 공정변수는 증착온도, 증착압력, DC power로 하고 종속변수(response)는 면저항, 면저항 균일도로 하는 '||'&'||'quot;통계적 실험방법'||'&'||'quot;을 채택한 실험을 수행하여 Co 박막의 공정 특성에 대해 다음과 같은 결과를 얻었다 '||'&'||'quot;통계적 실험방법'||'&'||'quot;을 이용한 Co박막의 공정 특성을 조사하는 본 실험에서 면저항과 면저항 균일도는 0.05 이하의 significance수치. 낮은 RMS error, 0.91 이상의 R-sq수치로부터 실험의 우수한 신뢰성을 확인하였다. 면저항에 대한 공정변수의 영향성은 증착온도가 -1.83$\Omega$/$\square$의 감소효과, 증착압럭이 1.17$\Omega$/$\square$의 증가 효과. DC power가 -0.65$\Omega$/$\square$의 감소 효과로 실험 구간에서 일정한 경향의 영향성을 보였으며, 면저항 균일도에서는 증착온도에 의해 $25^{\circ}C$~147$^{\circ}C$에서 -4.04%의 감소로 증착온도에 가장 민감함을 확인하였다. Co 박막의 최적 증착 조건은 증착온도 $25^{\circ}C$, 증착압력 12mTorr, DC power 1500 W로 예상되었다.

• 복식문화연구
• /
• 제30권5호
• /
• pp.752-765
• /
• 2022

Clothing, as a signsystem, implies many different meanings according to different circumstances. Korean fashion designers' designs also imply various meanings. Therefore, the purpose of this study is the exploration of Korean fashion designers' design characteristics through Greimas' Semiotic Square. As sublimity is the most representative characteristic of modern fashion design, this study discusses the in-depth aesthetic meaning innated in Korean fashion design through the semiotic square proposed by Greimas. To fulfill this goal, Korean fashion designers were sought after on the internet; consequently, four Korean designers became subjects for the analysis. Their collections were analyzed according to predefined criteria adopted and modified from previous studies. Sublimity characteristics were applied to Greimas' and Floch's semiotic squares for further interpretation. Results of the study indicate that sublimity, which is typically found in Korean fashion designs, varies depending on different points of view. In terms of culture, this study discovered a relationship of contrariety between sublimity and beauty. This finding opposes the theory of Greimas' semiotic square, in which sublimity stands as a contradictory of the technician. According to the culture industry theory, suggested by Held, the technician is an implication of sublimity. Through a technician, sublimity may pose as a complementarity or implication of beauty. Finally, sublimity might substitute beauty as well; furthermore, it constitutes practical valorization in the semiotic square of Floch. Moreover, the artist present as a ludic valorization stands as a contradictory, while art, serving as a utopian valorization, enacts as a contrary.

• 한국실내디자인학회논문집
• /
• 제16호
• /
• pp.29-35
• /
• 1998

The purpose of this study is to analyze the elements forming interior design and to examine dimensional relationship among the elements which form space through the comparison of the spatial language and semiotics of space for the component of interior design. In addition to that it indtends to derive the principle of design which dominate interior design and the inherent diversified meaning by comparing those elements with the square of semiotic used in semiotics. Through this comparsion the meaning of constituent forming space which can be observed through the comparsion of square of semiotic has redefined flexbility among relational system of elements and this flexible concept make the scope of environment including human being broad and enriched. This study fist of all analyzes various phenomena of social culture review semiotics meta-learning and examines back theoretical ground of semiotics which is needed for space analysis. Second of all in the area of presenting an analysis tool for meaningful analysis this report introduces the square of semiotics which was invented,. A. J. Greimas in order to analyze the meaning of literary work and defind three categories of the progressive research method for the analysis of interior design and research itself. Finally as for the analysis of meaning for interior design this report sets the space and analyzed the space in accordance with the method and research procedure. being

• 한국의상디자인학회지
• /
• 제13권4호
• /
• pp.93-110
• /
• 2011

This study investigates the analysis on the acceptance of Foreign Fashion trends in Korean Fashion Collection by collections, years, season, and designers. The purpose of this study is Korean collection's degree to adopt and receive foreign collections, by comparative analysis of design features between Seoul and foreign collections. For such purpose, from 2006 S/S to 2011 F/W, 5185 pictures were collected from designer's photos of Seoul, Paris, Milan, NY, and London collections. The content analysis and statistical analysis using SPSS will be conducted for data analysis. The results of the research are as follows. First, regarding the design features, square-form silhouette, achromatic colors, and none pattern were presented as well. Second, there were significant differences in the design characteristics of each year. Particularly, in 2008, X-form silhouette, Yellow and Green color, and flower pattern were emphasized. Third, the design features by season were significant differences. In S/S season, square-form and X-form silhouette, achromatic colors of white and gray color, none pattern were evident while in F/W season, square-form Silhouette, achromatic colors of black and gray, and none pattern were emphasized. Fourth, the design features by designer are as follows. In terms of form, Seoul collection was influenced by Paris collection. In terms of colors, it was influenced by NY and London collections.

• 한국조사연구학회지:조사연구
• /
• 제12권3호
• /
• pp.49-62
• /
• 2011

본 논문에서는 패널회귀모형에서 회귀계수 추정량으로 일반최소제곱추정량과 가중최소 제곱추정량의 설계기반 성질을 고찰한다. 회귀계수의 최소제곱추정량을 선형화하여 일반최소제곱추정량의 근사편향, 근사분산, 그리고 근사평균제곱오차의 수식과, 가중최소제곱추정량의 근사분산 수식을 유도한 후, 모의실험을 통하여 두 추정량의 근사분산 및 근사평균 제곱오차의 크기를 수치적으로 비교한다. 모의실험에서는 한국복지패널 3개년 데이터를 모집단으로 간주하고, 가구소득 변수를 관심변수로 하며 가구와 가구주 관련 7개 변수를 설명변수로 하는 유한모집단 회귀계수를 고려한다. 두 추정량의 설계기반 성질을 비교하기 위하여 표본수를 50에서 1,000까지 50 간격으로 설정하여 일반최소제곱추정량의 근사편향, 근사분산 그리고 가중최소제곱추정량의 근사분산을 계산한다. 모의실험을 통하여 다음과 같은 경향을 확인하였다. 첫째, 표본의 크기가 커지면 일반최소제곱추정량의 평균제곱오차가 가중최소제곱추정량의 분산보다 커진다. 둘째, 일반최소제곱추정량의 평균제곱오차를 가중최소제곱추정량의 분산으로 나눈비(ratio)는 설명변수에 따라 크기가 다르게 나타나고, 일반최소제곱추정량의 편향이 클수록 큰 값을 보인다. 셋째, 분산만 비교하면 일반최소제곱추정량의 분산이 가중최소제곱추정량의 분산보다 대부분의 경우에 더 작게 나타난다.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.119-125
• /
• 2017

In this paper, the characteristics and load carrying capacity of square pocket surfaces on a slider bearing are discussed for the thin film effect by the square pocket slider bearing. To study the lubrication, a Reynolds equation is used in this paper for the analysis of the slider bearing characteristics with square pocket surfaces. For numerical analysis, the central differencing scheme finite difference method is used. In a slider bearing with square pocket surfaces, the simulation dependent parameters such as pressure and load carrying capacity of the bearing can be acquired from the independent parameters, the slope of the slider bearing and number of pockets on the upper slider. These results can be acquired by the programmed softwar,e and they can be analyzed and stored in a sequential data file for later analysis. Furthermore, their pressure and load capacity distribution can be displayed easily by using the developed program with the Matlab GUI.

• 한국조경학회지
• /
• 제42권6호
• /
• pp.111-123
• /
• 2014

도시광장은 지역사회 모임이나 시장, 공연, 정치집회 및 기타 이벤트 등 다양한 활동이 행해지는 곳으로, 도시 내에서 다양한 유형으로 나타난다. 그럼에도 불구하고 대부분의 도시광장은 광장 유형별로 다르게 나타나는 방문객의 이용행태 및 이용만족에 대한 고려가 미비한 채 획일적으로 계획되어왔다. 본 연구에서는 서울에 위치한 일반광장 중 중심대광장을 대표하는 광화문광장과 근린광장을 대표하는 금빛공원광장을 중심으로 방문객 만족도에 영향을 미치는 설계요인과 세부 요소를 분석하여 도시광장 유형별 설계 시 중점적으로 고려해야 하는 방안을 제안하였다. 각 광장에서 수집한 설문조사 결과는 요인분석, 회귀분석, 퍼지이론 등을 이용하여 분석하였다. 연구결과를 요약하면, 첫째, 도시광장 설계요소 만족요인은 어메니티, 이용성, 공간특성, 문화성, 쾌적성요인으로 구분되었다. 둘째, 광화문광장의 공간이용 만족도에 영향을 미치는 요인은 어메니티요인, 쾌적성요인, 공간특성요인 순으로 나타났으며, 금빛공원광장의 공간이용 만족도에 영향을 미치는 요인 쾌적성요인, 어메니티요인, 이용성요인, 공간특성요인 순으로 나타났다. 셋째, 도시광장의 설계요소에 대한 만족요인별 만족순위를 퍼지이론을 통해 비교한 결과, 광화문광장은 어메니티요인 중 광장의 청결도에 대한 만족도가 가장 높게 나타났다. 금빛공원광장은 쾌적성요인 중 광장의 수목에 대한 만족도가 가장 높게 나타났다. 이와 같이 본 연구에서는 중심대광장과 근린광장의 이용객 만족도에 영향을 미치는 설계요소를 비교하였다. 연구의 결과는 이용객 만족을 고려한 도시광장 설계 및 계획에 기초자료로 사용될 수 있을 것으로 기대된다.