• 복식
• /
• 제59권6호
• /
• pp.72-81
• /
• 2009

The purpose of this study is to develop geometric patterns which can be reinterpreted in a modern sense and textile designs which can be commercialized in the mural painting of Goguryeo Dynasty's tomb. Of 42 tombs where genres and portraits could be observed, the costume style of Goguryeo dynasty could be mainly observed in the tombs built in the 4th and 5th centuries. Since geometric patterns found in the portrait could be represented in a modern sense, this study was intended to develop the patterns of a necktie which is one of cultural products by applying geometric patterns in the mural painting of Goguryeo Dynasty's tomb in the 5th century with many patterns distributed. The scope of patterns was limited to a square, a triangle, a circle, and a diagonal line which were the basic of geometric patterns found in the mural painting. The methods of study were literature review and empirical study. Adobe Photoshop CS3 was used to edit geometric patterns found in the mural painting of Goguryeo Dynasty's tomb in the 5th century. By extracting a square(${\square}$), a triangle(${\vartriangle}$), a circle(${\bigcirc}$), and a diagonal line(${\diagdown}$) from edited images, predicted images were proposed before products were made. Finally textile designs were made through the simulation of edited design patterns in the necktie and handkerchief. This study will contribute to the positive effects on the development of cultural product designs applying the characteristic of geometric patterns and the construction of Korean image.

• 한국강구조학회 논문집
• /
• 제10권4호통권37호
• /
• pp.589-600
• /
• 1998

본 연구는 케이블의 피로실험에서 라틴방격법의 유용성을 입증하고, 현수교에서의 행어로서 사용되는 와이어로프의 축방향 피로거동을 보기 위하여 계획되었다. 평균 응력, 응력범위, 시편의 길이를 실험 인자로 선정하였다. 위에 선정한 인자의 효과는 응력 범위의 효과를 제외하고는 이론이 제기되고 있다. 각 인자에서는 3개의 수준이 사용되었다. 각 셀에서 자유도를 증가시키기 위하여 3번을 반복 수행하였다. 피로파괴의 주요 원인은 격자 접촉점에서의 접촉성 피로(fretting fatigue)였다. 선정된 3개의 인자는 모두 유의하였다. 응력범위의 효과는 예측된 바와 같았으며, 길이효과는 예상과 반대의 결과를 보여주었고, 응력수준의 효과는 채택된 응력수준에 따라 실험결과가 달라질 수 있음을 보여줬다. 그러므로 라틴방격법은 직교성이 갖춰진다면 피로거동에 영향을 미치는 인자들을 규명하는 데에 매우 효과적인 실험 방법임을 알 수 있다.

• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.223-231
• /
• 2013

최근 구조물의 고층화, 대형화 및 장스팬 활용 등의 요구로 고강도 고성능 재료의 건축물과 교량에의 적용이 증가하는 추세이다. 본 논문은 고성능강(HSA800)의 건축구조용 재료 특성과 고성능강재를 사용한 부재의 설계 기준을 위한 기본적인 연구의 일부이다. 조립각형강관 기둥의 국부좌굴 거동과 현행 폭두께비 설계 제한치를 검토하기 위하여 다양한 폭두께비 변수를 계획하고, 단축압축실험을 실시하였다. 또한, 유한요소결과로 얻어낸 단주의 국부좌굴거동을 실험결과와 비교하였으며 검증된 해석모델을 이용하여 변수연구를 수행하였고 현행 설계기준의 적용성에 대해 검토하였다.

• 전기학회논문지
• /
• 제59권5호
• /
• pp.981-989
• /
• 2010

In this study, we introduce a new architecture of fuzzy inference system. In the fuzzy inference system, we use Fuzzy C-Means clustering algorithm to form the premise part of the rules. The membership functions standing in the premise part of fuzzy rules do not assume any explicit functional forms, but for any input the resulting activation levels of such radial basis functions directly depend upon the distance between data points by means of the Fuzzy C-Means clustering. As the consequent part of fuzzy rules of the fuzzy inference system (being the local model representing input output relation in the corresponding sub-space), four types of polynomial are considered, namely constant, linear, quadratic and modified quadratic. This offers a significant level of design flexibility as each rule could come with a different type of the local model in its consequence. Either the Least Square Estimator (LSE) or the weighted Least Square Estimator (WLSE)-based learning is exploited to estimate the coefficients of the consequent polynomial of fuzzy rules. In fuzzy modeling, complexity and interpretability (or simplicity) as well as accuracy of the obtained model are essential design criteria. The performance of the fuzzy inference system is directly affected by some parameters such as e.g., the fuzzification coefficient used in the FCM, the number of rules(clusters) and the order of polynomial in the consequent part of the rules. Accordingly we can obtain preferred model structure through an adjustment of such parameters of the fuzzy inference system. Moreover the comparative experimental study between WLSE and LSE is analyzed according to the change of the number of clusters(rules) as well as polynomial type. The superiority of the proposed model is illustrated and also demonstrated with the use of Automobile Miles per Gallon(MPG), Boston housing called Machine Learning dataset, and Mackey-glass time series dataset.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.21-26
• /
• 2020

A descending lifeline is the only self-escape fire apparatus for fire in high-rise buildings and is installed in most buildings according to fire-fighting law. However, it is difficult to properly use and quickly evacuate during an emergency due to its complex installation methods and procedures, even if users are pre-educated. In this paper, a new one-touch descending lifeline, which simplifies usage procedures and can be used regardless of whether users are educated, is proposed to solve the drawbacks of the conventional descending lifeline. All separate parts that require additional installation are initially assembled in a box, and the concept of a double square linkage is proposed to enable escape in a single motion of pushing the handle attached to the box. Three steps of kinematic design are explored to determine an appropriate configuration of double square linkage, and its dimensions are determined using Matlab and NX CAD software. The proposed all-in-one descending lifeline also follows the enforcement decree of the Fire Control Act, and its feasibility is verified through fabrication.

• 복식문화연구
• /
• 제26권2호
• /
• pp.188-202
• /
• 2018

This study aimed to categorize women's body shapes by type after extracting prototypes of 25~34 year old Korean woman. The standardizing research service project conducted by the Ministry of Commerce, Industry and Energy in 2005, divided the age ranges of adult women into three groups: 18~24 years (young), 25~34 years (young-adult) and 35~49 years (adult). This study utilized this age division method to create a concrete body type categorization schema with the most marriageable period, 25 to 34 years old as target age the target age group. We used, measurement data from the 7th Korean Human Body Size Survey (Size Korea) for the body shape analysis. We completed a statistical analysis using the statistical program SPSS 21. After creating the body types using CLO 3D, which is based on the 7th Korean human body measurements, we input data for the average size for each type into the Avata. We then compared and analyzed the cross sections using the Rapidform XOR program. The results of the type-specific characteristics are as follows: big square body of obese body, small square body of plain flat body with tall, plain square body of plain flat with short, triangular body of lower body obesity there was. Significantly, the results of this study should facilitate the development of various apparel products using mass customization or easy-order systems.

• 대한전자공학회논문지SD
• /
• 제37권12호
• /
• pp.79-90
• /
• 2000

본 논문에서는 고성능 수퍼스칼라 마이크로프로세서에 적합하고, IEEE 754 표준을 준수하는 고성능 부동 소수점 유닛의 구조를 설계한다. 부동 소수점 AU에서는 비정규화 수 처리를 모두 하드웨어적으로 지원하면서 추가적인 지연 시간이 생기지 않도록 점진적 언더플로우 예측 기법을 제안 구현한다. 부동 소수점 제산/제곱근기는 기존의 고정적인 길이의 몫을 구하는 방식과 달리 매 사이클마다 가변적인 길이의 몫을 구하는 구조를 채택하여 성능과 설계 복잡도 면에서 SRT 알고리즘에 의한 구현 보다 우수하도록 설계한다. 또한, 수퍼스칼라 마이크로프로세서에 이식이 용이하도록 익셉션 예측 기법을 세분화하여 적용하며, 제산 연산에서의 익셉션 예측에 필요한 스톨사이클을 제거하도록 한다. 설계된 부동 소수점 AU와 제산/제곱근기는 부동 소수점 유닛의 구성요소인 명령어 디코더, 레지스터 파일, 메모리 모델, 승산기 등과 통합되어 기능과 성능을 검증하였다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2002년도 추계 학술발표회 논문집
• /
• pp.79-83
• /
• 2002

A phase III clinical trial of a new drug for neutropenia induced by chemotherapy is presented and consider adding random effects in crossover design which was used in the clinical study. The diagnostics for its heteroscedasticity based on score statistic is derived for detecting homoscedasticity of errors in crossover design. A small simulation study is peformed to investigate the finite sample behaviour of the test statistic which is known to have an asymptotic chi-square distribution under the null hypothesis.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.590-596
• /
• 1987

In this paper, it was studied on the design of a sun sensor which is able to sense the declinations of an azimuth angle and a zenith angle for a digital sun seeker control system so that it will seek the sun accurately. And, it was considered the construction of digital controllable algorithms through experiments. Peculiar design method of the sun sensor is that sensor box was constructed with three square silicon solar cells and that the three cells were mounted unsymmetrical forming the

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2009년도 추계학술대회
• /
• pp.557-563
• /
• 2009

The research develops measurement processes for estimating and evaluating the gauge R&R(Reproducibility & Repeatability) using ANOVA(Analysis of Variance) of experimental design tools. The ten-step processes developed include experimental goal setting, the selection of characteristics(factors, levels), data model, ANOVA, EMS(Expected Mean Square), estimation of gauge precisions, and evaluation indexes. The three-factor combined measurement models are presented to show the processes developed in this paper.