• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.813-818
• /
• 2000

The objective of this study is to elucidate the characteristic performance of Roots-type vacuum pump with Cassini oval lobe shape. The modelled lobe shape of Roots-type vacuum pump is two-lobe spur gear. The numerical analyses are performed fer leak flows, using 4th-order Runge-Kutta method and are compared with experimental results. Results show that for the case of involute lobe shape the total amount of the leak flow conductance is greater than that of cycloid and Cassini oval lobe shapes.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.135-137
• /
• 2002

Many application in robotics, telecommunication, automation systems etc require powerful actuator. The powerful actuator have Speeds up to high speed and high output torque efficiencies. To accomplish a powerful actuator, these powerful motor have to be combined with gearheads of the same outer diameter. So, we have developed BLDC motor and planetary type gearheads as powerful actuator. The BLDC motor have advantages that compact structure, high efficiency, high reliability. The Planetary type gearheads have advantages that same-axle structure, high torque transmission, low noise in comparison with spur gearheads. In this study included BLDC motor and planetary type gearheads design, manufacture. This time study peformed for actuator of entertainment robot.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.785-788
• /
• 2003

Many application in robotics, telecommunication, automation systems etc require powerful actuator. The powerful actuator have Speeds up to high speed and high output torque efficiencies. To accomplish a powerful actuator, these powerful motor have to be combined with gearheads of the same outer diameter. So, we have developed BLDC motor and planetary type gearheads as powerful actuator. The BLDC motor have advantages that compact structure, high efficiency, high reliability. The Planetary type gearheads have advantages that same-axle structure, high torque transmission, low noise in comparison with spur gearheads. In this study included BLDC motor and planetary type gearheads design, manufacture. This time study performed for actuator of precision mechanism.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.319-322
• /
• 2006

Under the national project for the development of 2MW wind energy convert system, we are under development of the prototype of 2MW wind turbine with low speed gearbox. This system adopts low speed gear box with planetary and spur gear and is pitch regulated variable speed type with the synchronous permanent magnet generator. The compromised size of generator in diameter and width are adopted to meet the structural design requirements. In this paper, the concept study for the type, the aerodynamic design for the blade and the details of load calculation will be presented. The detailed characteristics of the system will also be introduced.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.6
• /
• pp.14-20
• /
• 2015

A high-speed reduction transfer case is usually employed by an excavator, wheel loader, or bulldozer. When powerful torque is required in the case of climbing steep roads or towing heavy equipment, the high-speed reduction mode of the gearbox is used. Generally, a transfer case using a spur gear type with a speed reduction system has a speed reduction ratio of 1 to 1 or 2 to 1. However, the structure of a transfer case achieved at a high speed of 1 to 1 and a low speed of 4.5 or under 5.5 to 1 with the speed reduction by use of a planetary gear type with a speed reduction system was proposed in this study. By employing a planetary gear type with a speed reduction system, the compact structure of the transfer case was achieved, and the impact or the partial defect of gear teeth was eliminated.

• Korean Journal of Plant Resources
• /
• v.9 no.2
• /
• pp.165-170
• /
• 1996

The study was carried out to identify the characteristics of leafy shapes, and to establish the cultural practices such as shading condition, fertilization method, and planting distance of Cirsium nipponicum. Leaf shapes in this plant consist of two kinds, lobation and non-lobation which has two spur type showing large and small spur. Protein band patterns showed that a new protein band in non-lobation with large spur was appeared at the 116.4kDa. For shading condition and fertilization method, number of stems in non-shading and organic matter treatment was higher than that of shading 55% with 3.7. Fresh leaf yield on non-shading and organic matter treatment was higher than that of other treatments. Growth characteristics of leaf number was increased in the $60\times30cm$ treatment, but was redeuced to some extent compared with $60\times45cm$. To increase the fresh leaf yield, the optimum planting distance was $30\times20cm$ with 4,100kg/10a.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.9
• /
• pp.180-187
• /
• 2003

In engineering design environment it is hard to link design data and systems because the types of them are disparate. Therefore, the importance of metadata has increased. Some researches have been executed to develop metadata. But they cannot interact with other metadata and are difficult to extend. The purpose of this paper is to develop a common document structure which represents the general information of mechanical part assembly using XML, and to use it as base documents in order to integrate design data and systems. It is composed of part, assembly and user documents. Part document represents the information of a part independently to part type. Assembly document represents the location of constituent part documents. User document represents user's information. Common documents can be used as a broker between design data and systems, and it can improve the interpretability and reusability of document. We applied the developed common document structure to 2-stage spur gear drive.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.422-427
• /
• 2000

Gear design carried in former type determined a few variables like module, pressure angle, helix angle. After investigating repeatedly results obtained through stress analysis and making a determination an optimal shape, but its design process was not only complex but also difficult to get a precise profile curve from operating by hand. In this study, rotating shape of gear profile curves were generated automatically with standard spur gear, equivalent helical gear, shifted gear & pinion by using developed program which is Auto_LISP language supported in Auto-CAD. Output tooth profile by using CAE program is applied as Preprocessor for stress analysis in each contact points. This program which can be determined rapidly an optimal shape of gear will be successfully supported for Small & Medium companies designing and manufacturing gears by using Auto-CAD.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.10a
• /
• pp.359-364
• /
• 2002

In engineering design environment it is hard to link design data and system because the types of them are disparate. Therefore, the importance of metadata has increased. Some researches have been executed to develop metadata. But they cannot interact with other metadata and are difficult to extend. The purpose of this paper is to develop a common metadata structure which represents the general information of mechanical part assembly using XML, and to use it as base documents in order to integrate design data and systems. It is composed of part and assembly documents. Part document represents the information of a part independently to part type. Assembly document represents the location of part documents which compose an assembly. Common documents can be used as a broker between design data and systems and improve interpretability and reusability of document. We applied the developed common document structure to 2-stage spur gear drive.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.1
• /
• pp.59-64
• /
• 2010

Herein is described a new species of Impatiens violascens B.U. Oh & Y.Y. Kim (Balsaminaceae) discovered on Bohyeon Mountain in Yeongcheon-si, Gyeongsangbuk-do, Korea. The new species is distinct from a closely-related species, I. textorii, by having a flower half the size that of I. textorii, sharply narrowed lower sepal, one half- to one time-coiled spur, and distal lobes of elliptical type laterally united petals. The key to these two species is provided.