• 한국정밀공학회지
• /
• 제20권9호
• /
• pp.180-187
• /
• 2003

In engineering design environment it is hard to link design data and systems because the types of them are disparate. Therefore, the importance of metadata has increased. Some researches have been executed to develop metadata. But they cannot interact with other metadata and are difficult to extend. The purpose of this paper is to develop a common document structure which represents the general information of mechanical part assembly using XML, and to use it as base documents in order to integrate design data and systems. It is composed of part, assembly and user documents. Part document represents the information of a part independently to part type. Assembly document represents the location of constituent part documents. User document represents user's information. Common documents can be used as a broker between design data and systems, and it can improve the interpretability and reusability of document. We applied the developed common document structure to 2-stage spur gear drive.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.52-56
• /
• 1992

A kinematically admissible velocity field for closed-die forging of spur gear is proposed. The velocity field is divided into three regions of deformation. In the analysis, the involute curve is approximated to be straight line and the upper-bound method is used to calculate energy dissipation rate. A constant frictional factor has been assumed on the contacting surfaces. The effects of root diameter relative pressure is independent of root diameter for the same number of teeth, but increases with the number of teeth on a given root diameter. In the presence of friction, relative forging pressure increases with increasing root diameter at the start of forging, but decreases with increasing root diameter in the processing of forging.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.813-818
• /
• 2000

The objective of this study is to elucidate the characteristic performance of Roots-type vacuum pump with Cassini oval lobe shape. The modelled lobe shape of Roots-type vacuum pump is two-lobe spur gear. The numerical analyses are performed fer leak flows, using 4th-order Runge-Kutta method and are compared with experimental results. Results show that for the case of involute lobe shape the total amount of the leak flow conductance is greater than that of cycloid and Cassini oval lobe shapes.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.359-364
• /
• 2002

In engineering design environment it is hard to link design data and system because the types of them are disparate. Therefore, the importance of metadata has increased. Some researches have been executed to develop metadata. But they cannot interact with other metadata and are difficult to extend. The purpose of this paper is to develop a common metadata structure which represents the general information of mechanical part assembly using XML, and to use it as base documents in order to integrate design data and systems. It is composed of part and assembly documents. Part document represents the information of a part independently to part type. Assembly document represents the location of part documents which compose an assembly. Common documents can be used as a broker between design data and systems and improve interpretability and reusability of document. We applied the developed common document structure to 2-stage spur gear drive.

• 한국시뮬레이션학회논문지
• /
• 제8권3호
• /
• pp.39-48
• /
• 1999

A finite element model of geared rotor system with flexible bearings were used to simulate the critical speeds and to investigate the effects of bearing coefficients on the dynamic behaviors of the systems. The finite element model includes the effects of tooth mesh stiffness, gyroscopic moment, rotary inertia, shear, and torque of the shaft. The gear mesh was modelled as a pair of rigid disks connected by a spring of time varying stiffness. The time varying mesh stiffness results in the abrupt change of the critical speeds of spur geared systems. As the bearing stiffness increases, critical speeds increase rapidly in case of stiff shafts, compared with flexible shafts.

• 한국정밀공학회지
• /
• 제13권7호
• /
• pp.29-35
• /
• 1996

For semi-solid forging with aluminuim alloys, it is required to develope the globular grain structure. It was studide that cold upsetting ration in SIMA process has effect on the globularization of grain structure. Globular microstructure was generated without cold upsettings for commercial aluminium alloys. In the case of A12024, the range of grain size was 40 .approx. 50 .mu. m. The grain growth in growth in globular microstructure depend on heating time. Spur gear was forged in semi-solid state to investigate the forging condition for A12024 with hydraulic press.

• 한국전산구조공학회논문집
• /
• 제30권2호
• /
• pp.169-177
• /
• 2017

본 논문에서는 기어 전달오차의 EEMD 적용을 통한 기어 이빨의 박리결함과 균열결함의 분류법을 소개한다. 두 가지 결함을 적용한 기어의 유한요소모델을 바탕으로 전달오차를 획득하고 전달오차에서 나타나는 두 가지 결함의 특징과 정상상태의 전달오차와의 차이를 나타내는 RTE에서 나타나는 두 가지 결함의 특징을 확인했으며 유한요소해석 결과를 이용한 시뮬레이션 신호를 구성하여 신호처리를 통한 RTE 획득과정을 구성하였다. 시뮬레이션 신호로부터 얻은 RTE의 EEMD 적용을 통하여 박리과 균열의 신호가 각기 다른 IMF에서 비중이 크다는 것을 확인하였고, 이를 실험을 통해 검증하고자 하였다. 한 쌍의 기어와 서보모터, 파우더브레이크 그리고 기어의 회전량을 측정하기 위한 엔코더로 구성되어있는 테스트베드를 꾸려 전달오차를 획득하였다. 두 개의 기어를 이용하여 정상, 박리, 균열 세가지 상황에 대한 전달오차를 획득하여 시뮬레이션과 같은 과정을 거쳐 결함이 신호로 구분되는 것을 확인했다. 이를 정량화 하기위해 파고율을 각 IMF에 적용하였고 첫 번째 IMF와 세 번째 IMF의 파고율을 특징 신호로 선정하였다. 실험을 통해 확보된 데이터를 이용하여 Bayes decision 이론을 이용하여 분류 방법을 제시하였다.

• 천문학논총
• /
• 제36권3호
• /
• pp.79-95
• /
• 2021

This study aims to develop a restoration model of an armillary sphere of Tongcheon-ui (Pan-celestial Armillary Sphere) by referring to the records of Damheonseo (Hong Dae-Yong Anthology) and the artifact of an armillary sphere in the Korean Christian Museum of Soongsil University. Between 1760 and 1762, Hong, Dae-Yong (1731-1783) built Tongcheon-ui, with Na, Kyung-Jeok (1690-1762) designing the basic structure and Ann, Cheo-In (1710-1787) completing the assembly. The model in this study is a spherical body with a diameter of 510 mm. Tongcheon-ui operates the armillary sphere by transmitting the rotational power from the lantern clock. The armillary sphere is constructed in the fashion of a two-layer sphere: the outer one is Yukhab-ui that is fixed; and the inner one, Samsin-ui, is rotated around the polar axis. In the equatorial ring possessed by Samsin-ui, an ecliptic ring and a lunar-path ring are successively fixed and are tilted by 23.5° and 28.5° over the equatorial ring, respectively. A solar miniature attached to a 365-toothed inner gear on the ecliptic ring reproduces the annual motion of the Sun. A lunar miniature installed on a 114-toothed inner gear of the lunar-path ring can also replay the moon's orbital motion and phase change. By the set of 'a ratchet gear, a shaft and a spur gear' installed in the solstice-colure double-ring, the inner gears in the ecliptic ring and lunar-path ring can be rotated in the opposite direction to the rotation of Samsin-ui and then the solar and lunar miniatures can simulate their revolution over the period of a year and a month, respectively. In order to indicate the change of the moon phases, 27 pins were arranged in a uniform circle around the lunar-path ring, and the 29-toothed wheel is fixed under the solar miniature. At the center of the armillary sphere, an earth plate representing a world map is fixed horizontally. Tongcheon-ui is the armillary sphere clock developed by Confucian scholars in the late Joseon Dynasty, and the technical level at which astronomical clocks could be produced at the time is of a high standard.

• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1327-1334
• /
• 2012

본 논문은 4차 동적 시스템인 구동기를 구성하는 부품들의 변량 및 공기외란의 변량으로 인해 구동기 성능에 변량이 존재할 때, 구동기의 성능을 순응도 기반으로 최적화한 설계 결과를 제시하였다. 구동기는 BLDC 모터와 평기어 및 웜기어 조립체, 카나드로 구성된다. 구동기의 성능은 시간에 따라 변화하는 카나드 각도 정보를 이용하여 평가하였다. 고차 시스템의 성능은 해석적 접근을 통해 시스템 변수들의 함수로 표현하기 어렵기 때문에 반응표면모델을 기반으로, F-검정을 수행하여 유효한 시스템 변수들을 선정한 후 성능을 유효한 시스템 변수들의 함수로 근사화하였다. 본 연구에서 변량을 가지는 구동기 성능의 규격에 대한 순응도를 확률값으로 정의하였다. 순응도를 최적화하여 구한 설계변수는 부품 및 공기외란에 변량이 존재하더라도 고려한 규격을 모두 만족시킬 수 구동기를 제공할 수 있다.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1217-1224
• /
• 2009

This paper presents a finite element (FE) analysis of the torsional rigidity of a two-stage cycloid drive. The cycloid disk makes contact with a number of pin-rollers simultaneously and eccentric shafts transmit not only torque of the spur gear stage to the cycloid disk, but also that of the cycloid disk to the output disk. Contacts between the disk and pin-rollers are simplified as linear spring elements, and the bearing of eccentric shaft is modeled as a rigid ring that has frictional contact to the disk and an elastic support. FE analysis for an ideal solid cycloid drive was performed and verified by a theoretical calculation. Accurate contact forces were then estimated by iterating between FE analysis for contact forces and Hertz theory calculations for nonlinear contact stiffness. In addition, torsional rigidity of the cycloid drive is analyzed to show that the bearing and nonlinear Hertz contact theory should be considered in analysis and design of a cycloid drive, which was verified with experiments. Finally, the effects of contact stiffness, bearing stiffness and cycloid disk structural stiffness according to the cycloid disk rotation on the torsional rigidity were investigated.