• 한국통신학회논문지
• /
• 제26권10B호
• /
• pp.1353-1359
• /
• 2001

본 논문에서는 위상획득과정과 동기과정에서 trade-off 현상을 향상시킨 듀얼 위상 주파수 검출기를 제안하여 차지펌프 PLL을 설계하였다. 듀얼 위상 주파수 검출기는 상승에지에서 동작하는 POSITIVE 위상 주파수 검출기와 하강에지에서 동작하는 NEGATIVE 위상 주파수 검출기로 구성되어 있다. 제안한 차지펌프는 전류뺄셈회로를 이용하여 전류 부정합을 감소시켰으며, reference spurs와 전압제어발진기의 변동을 감소시킬 수 있도록 구현하였다. 제안한 차지펌프 PLL은 0.25$\mu\textrm{m}$ CMOS 공정을 사용하여 SPICE로 시뮬레이션 하였으며, 그 결과 1.6~1.85GHz의 넓은 동기범위를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.482-484
• /
• 2006

This paper describes fast-hopping frequency synthesizers for multi-band OFDM(MB-OFDM) ultra-wide band(UWB) systems. Three different structures in generating 3 center frequencies(3432MHz, 3960MHz, 4488MHz) are designed and compared. The first structure generates 3 center frequencies using only one PLL operating at 4224MHz. The second uses three PLLs operating at corresponding center frequencies. The third employes two PLLs operating at 3960MHz and 528MHz. Simulation results using a 0.18um RF CMOS process parameters show that the third structure exhibit the best characteristics. The band switching time of the proposed synthesizer is less than 1.3ns and the spur is less than -36dBc. The synthesizer consumes 22mA from a 1.8V supply.

• Tribology and Lubricants
• /
• 제19권6호
• /
• pp.357-364
• /
• 2003

The sub­surface stress field beneath the gear's contact surface caused by the contact pressure in lubricated condition has been calculated. To evaluate the influence of the clearance shape on the stress field, two kinds of tooth profile models were chosen. One is the conventional cylinder contact model and the other is the new numerical model. Love's rectangular patch solution was used to obtain the sub­surface stress field. The analysis results show that the sub­surface stress is quite dependent on both the contact pressure and the profile model. The maximum effective stress of the new model is lower than that of the old model. The depth where the maximum effective stress occurs in the new model is not proportional to the intensity of the external load.

• 한국CDE학회논문집
• /
• 제1권2호
• /
• pp.150-157
• /
• 1996

The hob is considered as an effective gear cutting tool for achieving the various gears such as spur gear, helical gear, worm gear and so on. To enhance the productivity and precision of hobs and the competitive ability of domestic CNC hob relieving lathes, a CAM system for CNC hob relieving lathe needs to be realized. In this study, the CAM system is developed based on the personal computer and C language. Besides the automatic generation of CNC data, the developed CAM system has the various capabilities related to the generation of tool path, the cutting simulation for verifying the generated CNC data and forecasting the cutting time, the DNC operation for communicating the CNC data with CNC controller by RS232C port, and the estimation of undercut length for verifying the hob cutting conditions.

• 통상정보연구
• /
• 제6권3호
• /
• pp.123-136
• /
• 2004

In recent years, although far behind, the "e-Trade (B to G)" is propelled vigorously in Japan. But the diffusion of the "e-Trade" among companies (B to B) represented by bolero.net does not meet expectation. This paper carried out the questionnaire survey to the enterprises, which adopt bolero.net and examined why the diffusion is stagnated to the measures for its future spread. As a result, the top 3 adoption factors are: (1) Transaction climate, (2) Top management support, and (3) Operational improvement. In other words, it depends that top management has the will, which adopts e-trade positively among the reliable business partners and the operational performances can improve efficiently by carrying e-trade. We would like to clarify what will be crucial to spur the diffusion in the future. Based on the findings from the result, the concrete key points to promote the spread are to be indicated as follows: (1) Improve the scores of "Cost" and "Competitive pressure" (2) Improve the institutional factor.

• 대한족부족관절학회지
• /
• 제6권1호
• /
• pp.121-123
• /
• 2002

The os intermetatarseum is a relatively uncommon bony anomaly of the foot. It is usually found between the bases of the first and second metatarsal bones and ossifies during adolescence. It is most commonly seen in radiographs as a separated ossicle, but it may arise as a spur from the base of the first or second metatarsal bone or from the medial cuneiform bone. It sometimes articulates with the base of the first or second metatarsal bone. We treated a painfull os intermetatarseum by excision, and had a good result after 13months follow-up.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.472-473
• /
• 2008

This paper presents a charge pump used in frequency synthesizer for PHS application. The up/down current mismatch of charge pump has a critical effect on the phase noise and spur performance in frequency synthesizer. Therefore, the mismatch compensation scheme is proposed in this paper. And, the measurement results show that the mismatch can be reduced below 5 %.

• 대한족부족관절학회지
• /
• 제3권1호
• /
• pp.49-52
• /
• 1999

Slight protrusion of the dorsum of midfoot without degenerative arthritis is common and usually can be treated by avoiding pressure of the shoe. Primary or posttraumatic degenerative arthritis accompanied by severe functional disability is treated by realignment and arthrodesis of the involved joints. We report a case of osteophytic changes in the form of lipping at the base of the first metatarsal and medial cuneiform which was treated by resection of the spurs. The cause of these spurs may be the congenital coalition of the first metatarsocuneiform joint.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.1129-1132
• /
• 2003

본 논문에서는 위상/주파수 검출기을 설계시 문제가 되는 Reference Spur을 없게 하여 Low Noise를 구현할 수 있는 No Spike PFD(Phase Frequency Detector)를 제안한다. 위상동기루프의 특별한 형태로 차지 펌프 위상동기루프가 있다. 차지 펌프위상동기 루프는 일반적으로 3-state 위상/주파수 검출기를 이용한다. 이 3-state 위상/주파수 검출기는 기준 신호와 VCO 출력 신호의 위상차에 비례하는 디지털 파형으로 출력을 내보낸다. 차지 펌프 위상동기루프 그림 1 처럼 디지털 위상/주파수 검출기(PFD), 차지 펌프(CP), 루프 필터(LF), VCO로 구성된다. PFD 는 기준 신호와 VCO 에 의해 만들어진 출력 신호를 입력받아 각각의 위상과 주파수를 비교한다. 즉, 출력 신호가 기준 신호보다 느릴 때에는 출력 신호를 앞으로 당기기 위해서 up 신호를 넘겨주고, 출력 신호가 기준 신호보다 빠를 때에는 출력 신호를 뒤로 밀기 위해 down 신호를 넘겨준다. 차지 펌프(CP)의 전류를 Ip 라고 한다면, CP 에서 LF 로 흐르거나, LF에서 CP로 흐르는 전류 Ip의 평균량이 기준 신호와 VCO 출력 신호의 위상차에 비례하는 것이다.

• ETRI Journal
• /
• 제29권4호
• /
• pp.437-444
• /
• 2007

A CMOS frequency synthesizer block for multi-band orthogonal frequency division multiplexing ultra-wideband systems is proposed. The proposed frequency synthesizer adopts a double-conversion architecture for simplicity and to mitigate spur suppression requirements for out-of-band interferers in 2.4 and 5 GHz bands. Moreover, the frequency synthesizer can consist of the fewest nonlinear components, such as divide-by-Ns and a mixer with the proposed frequency plan, leading to the generation of less spurs. To evaluate the feasibility of the proposed idea, the frequency synthesizer block is implemented in 0.18-${\mu}m$ CMOS technology. The measured sideband suppression ratio is about 32 dBc, and the phase noise is -105 dBc/Hz at an offset of 1 MHz. The fabricated chip consumes 17.6 mA from a 1.8 V supply, and the die-area including pads is $0.9{\times}1.1\;mm^2$.