• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.46-69
• /
• 2013

The results of study on the meaning landscape and environmental design techniques of the Byulup, Yoohoedang garden(Hageowon) based on the story in the collection of Kwon Yi-jin (Yoohoedangjip, 有懷堂集), are as below. First, Yoohoedang Kwon Yi-jin (有懷堂 權以鎭 : 1668~1734) constructed a Byulup garden consisting of ancestor grave, Byulup, garden, and a school, through 3 steps for 20 years in the back hill area of Moosoo-dong village, south of Mountain Bomun in Daejeon. In other words, he built the Byulup(別業, Yoohoedang) by placing his father's grave in the back hill of the village, and then constructed Yoegeongam(餘慶菴) and Geoupjae(居業齋) for protection of the pond(Napoji, 納汚池), garden(Banhwanwon, 盤桓園), and ancestor graves, and descendants' studying in the middle stage. He built an extension in Yoohoedang and finally completed the large-size garden (Hageowon) by extending the east area. Second, in terms of geomancy sense, Yoohoedang Byulup located in Moosoo-dong village area is the representative example including all space elements such as main living house (the head family house of Andong Kwon family), Byulup (Yoohoedang), ancestor graves, Hagoewon (garden) and Yoegeongam (cemetery management and school) which byulup type Byulseo should be equipped with. Thirdly, there are various meaning landscape elements combining the value system of Confucianism, Buddhism and Taoism value, including; (1) remembering parents, (2) harmonious family, (3) integrity, (4) virtue, (5) noble personality, (6) good luck, (7) hermit life, (8) family prosperity and learning development, (9) grace from ancestors, (10) fairyland, (11) guarding ancestor graves, and (12) living ever-young. Fourth, after he arranged ancestor graveyard in the back of the village, he used surrounding natural landscapes to construct Hagoewon garden with water garden consisting of 4 mountain streams and 3 ponds for 13 years, and finally completed a beautiful fairyland with 5 platforms, 3 bamboo forests, as well as the Seokgasan(石假山, artificial hill). Fifth, he adopted landscape plantation (28 kinds; pine, maple, royal azalea, azalea, persimmon tree, bamboo, willow, pomegranate tree, rose, chinensis, chaenomeles speciosa, Japanese azalea, peach tree, lotus, chrysanthemum, peony, and Paeonia suffruticosa, etc.) to apply romance from poetic affection, symbol and ideal from personification, as well as plantation plan considering seasonal landscapes. Landscape rocks were used by intact use of natural rocks, connecting with water elements, garden ornament method using Seokyeonji and flower steps, and mountain Seokga method showing the essence of landscape meanings. In addition, waterscape are characterized by active use of water considering natural streams and physio-graphic condition (eastern valley), ecological corridor role that rhythmically connects each space of the garden and waterways following routes, landscape meaning introduction connecting 'gaining knowledge by the study of things' values including Hwalsoodam(活水潭, pond), Mongjeong(蒙井, spring), Hosoo(濠水, stream), and Boksoo(?水, stream), and sensuous experience space construction with auditory and visualization using properties of landscape matters.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.101-106
• /
• 2004

The process of removal of gummy proteinous material sericin from silk is commonly called as degumming loss or boil-off loss ratio. In the present study, the boil-off loss ratio in the cocoon shells of twelve multivoltine${\times}$bivoltine hybrids and their parents were analysed. Inheritance pattern of boil-off loss ratio was analysed in crosses involving high and low boil-off loss parents, F$_1$s, F$_2$s and back-crosses by parent off spring regression analysis. Heterosis and heterobeltiosis was also analysed for this character, Highly significant (P＞0.01) variations were observed in eight out of ten multivoltine and two out of five bivoltine parents indicating the presence of genetic variation in the expression of boil-off loss ratio. Among F$_1$ hybrids, ten hybrids expressed significant (P＞0.01) variations when compared with control hybrid PM${\times}$NB$_4$D$_2$. Significant negative heterosis was expressed in three multi ${\times}$ bi hybrids viz., BL67${\times}$CSR$_{101}$, 96A${\times}$CSR$_{19}$ and 96C${\times}$CSR$_{19}$, which is desirable for this character, whereas expression of heterobeltiosis was significant only with one hybrid, 96C${\times}$CSR$_{18}$ in desired direction. Studies on inheritance pattern showed that the character is heritable and contribution percentage of female and male in the ratio of 50.9: 49.1 and it appears that both the parents are influencing in the expression of boil-on loss ratio in silkworm. Based on the overall performance and evaluation by multiple trait evaluation index and also considering the expression of the boil-off loss ratio three hybrids vix., BL67 ${\times}$ CSR$_{101}$, 96A${\times}$CSR$_{19}$ and 96C${\times}$CSR$_{18}$ were found superior and recommended for commercial exploitation.n.ion.n.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.17 no.6
• /
• pp.523-528
• /
• 1984

The small filefish, Rudarius ercodes, generally spawning from mid May to early October in the natural habitat, was exposed to various photoperiod and temperature regimes. These environmental effects on the gonad activity, regression and recrudescence were experimentally investigated based on the mechanism of reproductive cycle. Spawning season was initiated in the early spring with the gonad activated by long photoperiod(13L) and stimulated by compensatory temperature rising. Even when the gonad activated readily at the above critical daylength (12L to 13L)was kept back at the below if, it went on maturing. At the end of spawning period (mid September), since the shortening of daylength (12L) resulted in the gonad regression regardless of temperature, the short daylength might be related to the termination of spawning in situ. When the regressive gonad at the post spawning period was treated by the above 13L: $20^{\circ}C$ condition, it could recrudesce and bring forth even spawning. From this fact, the feasible control of annual reproductive cycle of small filefish was recognized. But even in the long daylength, the temperature above $28^{\circ}C$ was preventive of gonad maturation.

• Cartoon and Animation Studies
• /
• s.44
• /
• pp.57-84
• /
• 2016

The image of woman shown in an animation was pretty extraordinary as Disney has kept the conservative tendency so far. The two princesses in were described as independent women getting out of the traditional gender role and dependence on men. For this reason, there is a tendency that interprets as a feminist work. Even though the character showing the image of independent woman could be an essential index to define feminist work, it is not enough to define the tendency of works. Thus, this study reviewed if it would be valid to interpret as a feminist work. First, the 'sisterhood' which is the main theme of contained the feminist concept as 'women's solidarity' on top of friendship between sisters. Therefore, when analyzed focusing on the core concept of women's solidarity like difference, empathy, and solidarity, reflected 'differences' in narration, character, and image, etc. When differences in sisters which became the cause for misunderstanding and conflict were acknowledge based on their true love, the process of forming empathy and solidarity was described. The solidarity between Elsa and Anna not only became the power to defeat the enemy, but also reflected the feminist value of forming the community of coexistence like Adelen which was rebuilt after getting back the spring. Thus, it was verified that is a feminist work.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.2
• /
• pp.153-160
• /
• 2010

We modified the optical system of 500 mm wide-field telescope of which point spread function showed an irregularity. The telescope has been operated for Near Earth Space Survey (NESS) located at Siding Spring Observatory (SSO) in Australia, and the optical system was brought back to Korea in January 2008. After performing a numerical simulation with the tested value of surface figure error of the primary mirror using optical design program, we found that the surface figure error of the mirror should be fabricated less than root mean square (RMS) $\lambda$/10 in order to obtain a stellar full width at half maximum (FWHM) below $28\;{\mu}m$. However, we started to figure the mirror for the target value of RMS $\lambda$/20, because system surface figure error would be increased by the error induced by the optical axis adjustment, mirror cell installation, and others. The radius of curvature of the primary mirror was 1,946 mm after the correction. Its measured surface figure error was less than RMS $\lambda$/20 on the table of polishing machine, and RMS $\lambda$/15 after installation in the primary mirror cell. A test observation performed at Daeduk Observatory at Korea Astronomy and Space Science Institute by utilizing the exiting mount, and resulted in $39.8\;{\mu}m$ of stellar FWHM. It was larger than the value from numerical simulation, and showed wing-shaped stellar image. It turned out that the measured-curvature of the secondary mirror, 1,820 mm, was not the same as the designed one, 1,795.977 mm. We fabricated the secondary mirror to the designed value, and finally obtained a stellar FWHM of $27\;{\mu}m$ after re-installation of the optical system into SSO NESS Observatory in Australia.

• Korean Journal of Poultry Science
• /
• v.17 no.1
• /
• pp.33-44
• /
• 1990

This studies were conducted to investigate the difference of carcass characteristics between chicken broiler and duck broiler and the carcass characteristics of chicken broiler by sex, rearing type, season and feed and water deprivation with 240 chicken broilers and 20 duck broilers. The results obtained are summerized as follows. 1. The carcass yields were 65.43% in chicken broiler and 66.78% in duck broiler. The abdominal fat pad of chicken broiler was higher than that of duck broiler. 2. There were differences in commercial cuts production percentages between chicken broiler and duck broiler, and the commercial cut of chicken broiler was produced from drumsticks and thighs, breast back, wings and neck in order. 3. Although there was little difference in carcass yields between male and female of broiler, the abdominal fat pad of male broiler was lower than that of female broiler. 4. The carcass yields in cage and floor type were not different, but the abdominal fat pad in cage was slightly higher than that in floor. 5. There was no difference in carcass yields among Spring, Summer, Autumn and Winter, but the abdominal fat pad was highest in Summer and lowest in Winter. 6. As feed and water deprivation time increased by one hour, live weight was decreased by 0.28365% , and the carcass yield was highest after 6 hours depribated feed and water.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.44 no.1
• /
• pp.38-43
• /
• 1999

Over 2,000 ha of rice fields in the western and southern coastal region of Korea were flooded with sea water during the spring tide, on August 19-21, 1997, and the rice plant at heading stage was injured. The field surveys were undertaken at the sea water flooded paddy fields in Chonbuk Province, to identify the injury symptoms and rice yield damage subjected to different flooding condition and desalinization methods. Five days after sea water flooding at heading stage, the flag leaves of rice plants flooded with 30 ㎝ deep sea water withered from the tip, the withering progressed to the lower leaves in deeper flooding. The spikelets were spotted black and discolored from the tip at 50 ㎝ deep flooded rice, and some panicles changed to white at 80 ㎝ deep flooded rice. Most of the rice leaves submerged completely for an hour were withered and most of panicles changed to white. The milled rice yield, percentage of ripened grain, and 1000 grain weight of flooded rice decreased with deeper flooding water, higher water salinity and longer flooding time. Even under the same flooding conditions, the damage of rice yield varied with the growth stage: heading stage>dough stage>booting stage. Rice yield damage was less in the fields on the upper riverside than those of the fields on the estuary and seaside, because of lower water salinity. In a flooded field, the rice yield damages were reduced as the distance increased from the levees where the sea water inflowed and increased as the distance increased from the fresh water irrigation gate. The desalinization treatments consisting of frequent exchange of irrigation water and spraying with fresh water soon after flooding effectively reduced the rice yield damage.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.6
• /
• pp.571-580
• /
• 1985

Based on the data collected by R/V "Shinkai Maru" of the Japan Marine Fishery Resources Research Center during the period from April 1978 to April 1979, seasonal migration of Merluccius hubbsi was studied using the catch per fishing effort (tons/30 min. haul) and gonad maturity index (gonad weight /body weight X $10^3$). Merlurccius hubbsi are found in the area between $36^{\circ}S\;and\;54^{\circ}S$ along the coast of Arzentine and are abundant especially above the 100 fathoms in northern offshore of $48^{\circ}S$. It was observed that critical maturity body lengths (spawning minimum body length) in terms of gonad maturity index are 40 cm and 30cm in female and male respectively, while spawning seasons are from December to January and from November to December for female and male respectively. It was assumed that while the group which distrbutes in the north ($36^{\circ}S{\sim}39^{\circ}S$) in spring moves down south to $42^{\circ}{\sim}46^{\circ}S$ for spawning in summer (from December to January), the group which does not move or a part of this group which comes back to the north spawn in the area north of $42^{\circ}S$ throughout the long period except winter time (from July to August). Southern group as well might move north and spawn after mixing together with northern group at $42^{\circ}{\sim}46^{\circ}S$ area around the period of December to January,

• Journal of Biomedical Engineering Research
• /
• v.26 no.6
• /
• pp.393-398
• /
• 2005

An electromechanical type is the most useful mechanism in the various pumping mechanisms. It, however, requires a movement converting system including a ball screw, a helical cam, or a solenoid-beam spring, which makes the device complex and may lessen reliability. Thus, the authors have hypothesized that an electromagnetic actuator mechanism can eliminate the movement converting system and that thereby enhance the mechanical reliability and operative simplicity of an electro­pneumatic pump. The purpose of this study was to show a novel application of electromagnetic actuator mechanism in pulsatile pump and to provide preliminary data for further evaluations. The electromagnetic actuator consists of stators with a single winding excitation coil and movers with a high energy density neodymium-iron-boron permanent magnet. A 0.5mm diameter wire was used for the excitation coil, and 1000 turns were wound onto the stators core with parallel. A prototype of extracorporeal electro-pneumatic pump was constructed, and the pump performance tests were performed using a mock system to evaluate the efficiency of the electromagnetic actuator mechanism. When forward and backward electric currents were supplied to the excitation coil, the mover effectively moved back and forth. The nominal stroke length of the actuator was 10mm. The actuator dimension was 120mm in diameter and 65mm in height with a mass of 1.4kg. The prototype pump unit was 150mm in diameter, 150mm in thickness and 4.5kg in weight. The maximum force output was 70N at input current of 4.5A and the maximum pump rate was 150 beats per minute. The maximum output was 2.0 L/minute at a rate of 80bpm when the afterload was 100mmHg. The electromagnetic actuator mechanism was successfully applied to construct the prototype of extracorporeal electro­pneumatic pump. The authors provide the above results as a preliminary data for further studies.

• Design & Manufacturing
• /
• v.12 no.2
• /
• pp.40-45
• /
• 2018

Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.