• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.1
• /
• pp.201-208
• /
• 2022

As around the world, ground and underground transportation capacity is reaching its limit, centering on urban areas. As urban traffic becomes congested, time and cost are astronomical, and environmental destruction caused by urban pollution is becoming increasingly serious. As a way to solve this problem, the means of flying over the air are in the spotlight as the next generation of future transportation, and the concept of urban air mobility (UAM, Urban Air Mobility) is defined as systematic planning. The development of an electric-powered vertical take-off (eVTOL) aircraft that obtains electric power through a battery using a personal aerial vehicle (PAV) as a means of transportation has accelerated. As the aircraft development of new technology aircraft in the evtol method is actively carried out, the need to prepare systems such as aircraft certification standards, pilot qualification systems, and qualification management is emerging. The Federal Aviation Administration (FAA) and the European Union Aviation Safety Agency (EASA), which lead international standards, announced new special technical conditions and temporary regulations SCVTOL-01, respectively. However, the pilot qualification system for operating the uam aircraft has not yet been clearly announced. Therefore, this paper analyzes the recently announced FAA regulations and EASA regulations to identify differences and directions in perspectives on UAMs and study the existing vertical take-off and landing aircraft (VTOL) pilot qualification system to present directions for qualification classification.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.4_2
• /
• pp.673-686
• /
• 2022

Recently, as the importance of eco-friendly energy has increased hydrogen gas is in the spotlight as future energy. Due to its special properties, hydrogen gas is more difficult to detect requiring more precise sensing technology. The primary objective of this study is to design a concept of an underground hydrogen pipeline monitoring system. For this, the following research works are conducted sequentially; 1)selection of core technology for conceptual design, 2)state-of-the-art review, 3)design of a concept of the system. As a result, DAS(Distributed Acoustic Sensing), and DTS(Distributed Temperature Sensing) are selected as each core technology. Furthermore, a conceptual design of an underground hydrogen pipeline monitoring system is deducted. It is expected that the impact on the eco-friendly energy industry will be enormous due to the increasing interest in using hydrogen energy.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.227-234
• /
• 2022

Wastewater is released from leather, textile, paint, wood, or dye processing industries as well as petroleum refining industries. Wastewater from these industries contains water pollutant such as heavy metals and nitrogen compounds and has high chemical oxygen demand (COD). While there various filtering pollutants from wastewater for safe disposal, membrane-based technology is one of the most efficient methods for its high efficiency and low cost. Among various membranes, zeolite membranes gain spotlight for its cost-effectiveness and have undergone a lot of research. This review is focused on recent progress in zeolite membrane for wastewater treatment in following order: i) wastewater treatment, ii) microfiltration membrane, iii) hollow fiber membrane, and iv) ultrafiltration membrane.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.45 no.4
• /
• pp.99-108
• /
• 2022

Today, as technology advances and market competition for products intensifies, the product design to improve customer satisfaction by accurately identifying customer needs is emerging as a very important issue for company. Accordingly, the customer-oriented or customer-centered design that maximizes customer satisfaction by grasping and analyzing customer requirements is in the spotlight as an important design theory. In this study, the customer-oriented design is defined as finding the optimal value of design variable with the maximum overall customer satisfaction while minimizing the difference in individual customer satisfaction responded to various customers from multiple product quality characteristics from the perspective of robust design. Therefore, this study presents a new method for modeling the customer preference structure as the different sets of desirability functions for multiple quality characteristics and proposes a new customer-oriented design approach by applying the desirability functions to Taguchi's robust design process to deal with multi-characteristic design problem. Finally, the proposed method is illustrated with the Kansei engineering design problem of wine glass.

• Journal of Korea Society of Industrial Information Systems
• /
• v.15 no.1
• /
• pp.25-36
• /
• 2010

Recently, digitizing technologies for conservation and restoration of tangible intangible cultural properties are coming into spotlight. Because cultural properties are easy to be lost and damaged over the years, After construction of cultural assets database we can reconstruct the cultural asset making use of the reverse engineering when needed, and implement digital contents such as computer graphics, 3D virtural realization, hologram, etc. So in this paper, we scrutinize visual and technical factors occurring in different types of digital restoration of cultural properties, and present problems and improvements, and try to research technological prowess and visual mechanism.

• Physical Therapy Rehabilitation Science
• /
• v.11 no.4
• /
• pp.517-525
• /
• 2022

Objective: The rehabilitation protocols for functional recovery have been emphasized after total knee arthroplasty, and Pilates is in the spotlight as a safe and easily modified exercise method. The purpose of this study was to investigate the effects of mat Pilates exercise on lower extremity function, postural balance, and walking in the individuals with total knee arthroplasty. Design: One group pretest-posttest design. Methods: Eighteen older women with unilateral total knee arthroplasty was recruited in the study. The subjects were evaluated on lower extremity function, postural balance, and walking before and after mat Pilates exercise. All subject performed one hour mat Pilates exercise, 3 times a week for 8 weeks. Mat Pilates exercises were focused on core stability and lower extremity strengthening and, more dynamic movements were added to increase the difficulty of movements every two weeks. The lower extremity function was measured using the Western Ontario and McMaster Osteoarthritis Index (WOMAC), knee joint position sense, and five times sit-to-stand test. Postural balance was assessed by single leg stance test, functional reach test, and timed up and go test. Walking was measured by OptoGait system to temporospatial parameter. Results: The lower extremity function, postural balance, and walking were significantly improved after mat Pilates exercise, except for five times sit-to-stand test (p<0.05). Conclusions: This study demonstrated that the mat Pilates exercise was a useful method to improve lower extremity function, postural balance, and walking in the older women with unilateral total knee arthroplasty.

• Korean Journal of Materials Research
• /
• v.32 no.2
• /
• pp.107-113
• /
• 2022

Fibrous supercapacitors (FSs), owing to their high power density, good safety characteristic, and high flexibility, have recently been in the spotlight as energy storage devices for wearable electronics. However, despite these advantages, FCs face many challenges related to their active material of carbon fiber (CF). CF has low surface area and poor wettability between electrode and electrolyte, which result in low capacitance and poor long-term stability at high current densities. To overcome these limits, fibrous supercapacitors made using surface-activated CF (FS-SACF) are here suggested; these materials have improved specific surface area and better wettability, obtained by introducing porous structure and oxygen-containing functional groups on the CF surface, respectively, through surface engineering. The FS-SACF shows an improved ion diffusion coefficient and better electrochemical performance, including high specific capacity of 223.6 mF cm^-2 at current density of 10 ㎂ cm^-2, high-rate performance of 171.2 mF cm^-2 at current density of 50.0 ㎂ cm^-2, and remarkable, ultrafast cycling stability (96.2 % after 1,000 cycles at current density of 250.0 ㎂ cm^-2). The excellent electrochemical performance is definitely due to the effects of surface functionalization on CF, leading to improved specific surface area and superior ion diffusion capability.

• Korea Trade Review
• /
• v.43 no.2
• /
• pp.127-157
• /
• 2018

This paper investigates how blockchain technology which is an innovation technology of the 4th Industrial Revolution has been settled in international trade. FinTech technology is expected to expand because a new remittance method for replacing the letter of credit has been introduced. In addition, since the purchase of individual customers makes international trade increase rapidly, more convenient FinTech technology will stand in a spotlight. Thus, we confirm that cryptocurrency use will increase in order to maintain stability and reduce risk in international transactions. However, since the legal standing of blockchain technology is now insufficient, the slow spread of FinTech technology will be made for a while.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.2
• /
• pp.168-175
• /
• 2023

In the era of the 4th Industrial Revolution, Logistic 4.0 using data-based technologies such as IoT, Bigdata, and AI is a keystone to logistics intelligence. In particular, the AI technology such as prognostics and health management for the maintenance of logistics facilities is being in the spotlight. In order to ensure the reliability of the facilities, Time-Based Maintenance (TBM) can be performed in every certain period of time, but this causes excessive maintenance costs and has limitations in preventing sudden failures and accidents. On the other hand, the predictive maintenance using AI fault diagnosis model can do not only overcome the limitation of TBM by automatically detecting abnormalities in logistics facilities, but also offer more advantages by predicting future failures and allowing proactive measures to ensure stable and reliable system management. In order to train and predict with AI machine learning model, data needs to be collected, processed, and analyzed. In this study, we have develop a system that utilizes an AI detection model that can detect abnormalities of logistics rotational equipment and diagnose their fault types. In the discussion, we will explain the entire experimental processes : experimental design, data collection procedure, signal processing methods, feature analysis methods, and the model development.

• Geomechanics and Engineering
• /
• v.34 no.5
• /
• pp.529-545
• /
• 2023

The coupled soil-pile-structure seismic response is recently in the spotlight of researchers because of its extensive applications in the different fields of engineering such as bridges, offshore platforms, wind turbines, and buildings. In this paper, a simple analytical model is developed to evaluate the dynamic performance of seismically isolated bridges considering triple interactions of soil, piles, and bridges simultaneously. Novel expressions are proposed to present the dynamic behavior of pile groups in inhomogeneous soils with various shear modulus along with depth. Both cohesive and cohesionless soil deposits can be simulated by this analytical model with a generalized function of varied shear modulus along the soil depth belonging to an inhomogeneous stratum. The methodology is discussed in detail and validated by rigorous dynamic solution of 3D continuum modeling, and time history analysis of centrifuge tests. The proposed analytical model accuracy is guaranteed by the acceptable agreement between the experimental/numerical and analytical results. A comparison of the proposed linear model results with nonlinear centrifuge tests showed that during moderate (frequent) earthquakes the relative differences in responses of the superstructure and the pile cap can be ignored. However, during strong excitations, the response calculated in the linear time history analysis is always lower than the real conditions with the nonlinear behavior of the soil-pile-bridge system. The current simple and efficient method provides the accuracy and the least computational costs in comparison to the full three-dimensional analyses.