• 한국정밀공학회지
• /
• 제20권10호
• /
• pp.169-176
• /
• 2003

Genetic algorithm (GA), which has a powerful searching ability and is comparatively easy to use and also to apply, is in the spotlight in the field of the optimization for mechanical systems these days. However, it also contains some problems of slow convergence and low efficiency caused by a huge amount of repetitive computation. To improve the processing efficiency of repetitive computation, some papers have proposed paralleled GA these days. There are some cases that mention the use of gray code or suggest using gray code partially in GA to raise its slow convergence. Gray code is an encoding of numbers so that adjacent numbers have a single digit differing by 1. A binary gray code with n digits corresponds to a hamiltonian path on an n-dimensional hypercube (including direction reversals). The term gray code is open used to refer to a reflected code, or more specifically still, the binary reflected gray code. However, according to proposed reports, gray code GA has lower convergence about 10-20% comparing with binary code GA without presenting any results. This study proposes new Full gray code GA (FGGA) applying a gray code throughout all basic operation fields of GA, which has a good data processing ability to improve the slow convergence of binary code GA.

• 한국유체기계학회 논문집
• /
• 제14권3호
• /
• pp.33-38
• /
• 2011

Medicated water electrolysis apparatus, which electrolyzes water into acidic water and alkaline water, was in the spotlight as becoming known the effect of alkaline water. It is known as good for health as removing active oxygen in the human's body and promoting digestion. But, the customers could not get that desired water temperature because these apparatuses are directly connected with a water pipe. So, the cooling system was developed for controlling the temperature of the alkaline water. One of the typical way is to store water in water tank and control the temperature. But, in this way, storing water can be polluted impurities coming from outside. For protecting this pollution, the cooling system based on indirect heat exchange method through phase change between water and ice was developed. In this study, we have calculated efficiency of the cooling system with phase change by experiment and commercial CFD(Computational Fluid Dynamics) code, ANSYS CFX. To consider the effect of latent heat that is generated by melting ice, we have simulated two phase numerical analyses used enthalpy method and found the temperature, velocity, and ice mass distribution for calculating the efficiency of cooling. From the results of numerical analysis, we have obtained the relationship between the cooling efficiency and each design factor.

• 한국전자파학회논문지
• /
• 제28권11호
• /
• pp.894-901
• /
• 2017

요동이 존재하는 환경에서 항법 장비 정확도의 한계 및 시스템 지연 오차 등으로 방위 위상 오차가 필연적으로 발생하는 항공기 탑재 SAR(Synthetic Aperture Radar)의 경우, 방위 위상 오차를 신호처리 알고리즘으로 추정하고 보상하는 자동 초점(Autofocus: AF) 기법 적용이 필수적이다. 본 논문에서는 수정된 가중치 최소 자승기법(Modified Weighted Least-Squares: MWLS)에 의한 자동 초점 알고리즘을 제안한다. 새로운 방식의 표적 선정 및 정렬과 방위 방향 반복 위상 추정 방식을 통해 기존 WLS보다 견고한 성능을 보이게 된다. 비행 시험을 통해 획득한 SAR 원시데이터에 제안한 방식을 적용하고 성능을 분석하여 제안한 방식의 유효함과 우수성을 입증하도록 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2011년도 추계학술대회
• /
• pp.862-865
• /
• 2011

WebGL은 OpenGL ES 2.0기반의 로우레벨(low-level) 3차원 그래픽스 API를 위한 크로스 플랫폼 웹 표준으로써, 웹 브라우저에서 별도의 플러그인을 설치하지 않고도 3차원 그래픽을 표현할 수 있도록 해준다. WebGL이 더욱 관심을 끌고 있는 이유는 PC 뿐만 아니라 스마트폰, 태블릿, 스마트 TV 등 다양한 디바이스를 위한 차세대 RIA(Rich Internet Application) 플랫폼으로 각광을 받고 있는 HTML5의 표준 안에 포함되기 때문이다. 본 연구에서는 WebGL 기반의 콘텐츠에서 복잡한 상호작용과 3차원 객체의 행위 모델을 쉽고 빠르게 저작하기 위한 행위 엔진을 제안하고 개발하고자 한다.

• 한국IT서비스학회지
• /
• 제15권4호
• /
• pp.125-151
• /
• 2016

In recent years, O2O (Online to Offline) services get a lot of attention to improve the trust in online shopping and minimize the inconvenience and the cost burden in offline shopping as the number of consumers, who do not show concern about the purchase platform like online or offline, increases. Even though the services have been getting the spotlight as a strong business platform for next generation commerce, there have been only a few studies on the O2O services. The purpose of this research is to investigate the factors which affect the consumer's intention to use location-based O2O services. The study is based on VAM (Value-based Adoption Model) which is able to analyze those factors from the aspects of benefit and sacrifice. We used the partial least squares (PLS) method for empirical analysis, and the result shows that contextual offers, instant connectivity, webrooming and economic efficiency, which fall under the benefit, affect perceived value positively while annoyance and face consciousness, which fall under the sacrifice, do not affect perceived value significantly. In addition, contextual offers and instant connectivity affect trust positively. Location accuracy, which falls under the benefit of location-based O2O service, do not significantly affect perceived value and trust while security risk affects trust and use intention negatively. It appears that trust affects perceived value and use intention positively.

• 전력전자학회논문지
• /
• 제15권4호
• /
• pp.319-326
• /
• 2010

LCD TV의 슬림화를 위한 전원장치는 고효율 및 고전력 밀도를 요구하고 있다. 최근 LCD TV의 LED 백라이트는 소비전력이 매우 적고 수명이 반영구적이며 밝기가 뛰어나는 동시에 기존의 CCFL 보다 적은 공간을 차지해서 두께를 혁신적으로 줄일 수 있는 장점을 지니고 있다. 그리고 본 논문에서는 LED 백라이트 구동용 고주파 평판형 트랜스포머를 이용하여 LLC 공진컨버터를 제안 적용하였고 실험 결과에 대하여 서술한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.2427-2429
• /
• 2005

OLED in the spotlight of display market has advantages of low power driving, self-emission and fast response. But it has disadvantages of inefficient luminescence and high power consumption. Most of PM(passive Matrix) DC-DC converters in common use is using voltage divider. This voltage divider type has some difficulties of suitable electric device selection for voltage division and of the stabilized output due to feedback current trimming. Therefore, noise analysis and power solution in OLED are important technologies having an effect on electric characteristics. In this dissertation, we have obtained the stable output by using digital signals in multi-channel DC-DC converter, the profit of power consumption reduction of driving source and economical efficiency in the PCB board size.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1831-1833
• /
• 2003

Nowadays, CO2 lasers are used widely in many applications such as materials fabrication, communications, remote sensing and military purpose etc. Especially, CO2 lasers are in the spotlight at surface handling and heat processing. It is important to control the laser output power and beam quality in those fields. To increase beam qualify, We used the feedback system by various sensors. Although, CO2 lasers' output beam became feedback, its beam affected the irradiated material target already. Since, ideal real time control have still the problem to solve. Hence, we need the new proposal for more precise laser processing. So we expect the new effect how to change the irradiated material target as the kind of, processing time and output density caused by the CO2 laser beam. In this study, We have investigated the characteristics of the temperature and HAZ(Heat Affected Zone) by CO2 laser output with IR temperature sensor and RTD.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.125-129
• /
• 2016

Anodizing is a technology to generate thicker and high-quality films than natural oxide films by treating metals via electrochemical methods. Electrochemical manufacturing method of nano structure is an efficient technology in terms of cost reduction, high productivity and complicated shapes, which receives the spotlight in diverse areas. Especially, artificial films generated by anodizing technology possess excellent mechanical characteristics including hardness and wear resistance. It is also easy to modify thickness and adjust shape of those artificial films so that they are mainly used in sensors, filters, optical films and electrolytic condensers. In this study, experiment was performed to observe the effect of current density on porous film formation in two-step anodizing for Al alloy. Anodizing process was performed with 10 vol.% sulfuric acid electrolyte while the temperature was maintained at $10^{\circ}C$ using a double beaker. and $10{\sim}30mA/cm^2$ was applied for 40 minutes using a galvanostatic method. As a result, both pore diameters and distances between pores tended to increase as the local temperature and electrolysis activity increased due to the increase in applied current density.

• 전력전자학회논문지
• /
• 제19권4호
• /
• pp.327-331
• /
• 2014

LED(Light Emitting Diode) is a semiconductor device utilizing electroluminescent effect is a phenomenon in which a type of P-N junction diode, the light of short wavelength which a voltage is applied in the forward direction is released. LED is advantageous in reducing the energy as environmentally materials that can greatly reduce the carbon emissions, recent it has attracted attention IT(Information Technology) and GT(Green Technology) industry. In addition, there are advantages long life, high efficiency, and excellent response speed, LED have come into the spotlight as the illumination means to replace the existing fluorescent light and incandescent light bulb. When connecting to MR16 electronic transformer for existing LED driver circuit, due to malfunction of the dimmer and the electronic transformer, flicker occurs and linear dimming is not possible. Therefore, in this paper, we suggest an LED drive circuit there is no flicker with the corresponding dimming MR16 electronic transformer. Further, we explain the principles of the LED current control technique and the principle of the drive circuit of the LED, in order to validate the proposed circuit through prototyping and simulation.