• 한국분무공학회지
• /
• 제23권2호
• /
• pp.81-89
• /
• 2018

The objective of this study is to estimate the level of exposure of traffic-related air pollutants (TRAPs) on the pedestrians in Seoul area. The road network's link-based pollutant emission was calculated by using a set of mobile source emission factor package and associated activity information. The population information, which is the number of pedestrian, was analyzed in conjunction with the link-based traffic emissions in order to quantify exposure level by selected 23 spots. We proposed the Exposure Intensity, which is defined by the amount of traffic emission and the population, to quantify the probability of exposure of pedestrian. Link-based traffic NOx and PM emissions vary by up to four times depending on the location of each spot. The Hot-spots is estimated to be around 1.8 times higher Exposure Intensity than the average of the 23 selected spots. The information of Exposure Intensity of each spot allows us to develop localized policies for air quality and health. Even in the same area, the Exposure Intensity over time also shows a large fluctuation, which gives suggestions for establishing site-specific counter-measures.

• Imaging Science in Dentistry
• /
• 제35권4호
• /
• pp.207-213
• /
• 2005

Purpose: To classify and describe the characteristic features of MRI of some ameloblastoma variants. Materials and Methods: The MR images, CT images, and panoramic radiographs in 5 cases were retrospectively examined as follows. First, the contents of ameloblastomas were devided into two portions of either solid or cystic components on the basis of MR signal intensities. The signal intensity within the solid or cystic portions was classified as homogeneous or heterogeneous. Next, the characteristic internal feature of the lesion on T1W1 or T2WI was described. The signal intensities were classified into low, intermediate, slightly high, high, and strong high signal intensity. Results: Unicystic lesion showed homogeneous high signal intensity (SI) on T2W2 and the rim enhancement of the surrounding area including the mural nodule and the thick wall except the central portion on Gd- T1W1. Solid type revealed heterogeneous and high SI area with strong high SI area on T2W2. On Gd- T1W1, the area corresponding to the low signal spot on T1W1 and the strong high signal spot on T2W1 showed low SI. Hybrid type showed slightly enhanced capsular structures and low SI for the round bony septa and the areas connecting the mixed and cystic lesions on T2Wl and Gd-T1W1. Conclusion: MRI could easily assess the relationship between the mixed and cystic findings in ameloblastoma.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권3호
• /
• pp.1633-1649
• /
• 2017

In remote sensing image processing, the traditional fusion algorithm is based on the Intensity-Hue-Saturation (IHS) transformation. This method does not take into account the texture or spectrum information, spatial resolution and statistical information of the photos adequately, which leads to spectrum distortion of the image. Although traditional solutions in such application combine manifold methods, the fusion procedure is rather complicated and not suitable for practical operation. In this paper, an improved IHS transformation fusion algorithm based on the local variance weighting scheme is proposed for remote sensing images. In our proposal, firstly, the local variance of the SPOT (which comes from French "Systeme Probatoire d'Observation dela Tarre" and means "earth observing system") image is calculated by using different sliding windows. The optimal window size is then selected with the images being normalized with the optimal window local variance. Secondly, the power exponent is chosen as the mapping function, and the local variance is used to obtain the weight of the I component and match SPOT images. Then we obtain the I' component with the weight, the I component and the matched SPOT images. Finally, the final fusion image is obtained by the inverse Intensity-Hue-Saturation transformation of the I', H and S components. The proposed algorithm has been tested and compared with some other image fusion methods well known in the literature. Simulation result indicates that the proposed algorithm could obtain a superior fused image based on quantitative fusion evaluation indices.

• 한국자기학회지
• /
• 제18권2호
• /
• pp.71-74
• /
• 2008

본 논문에서는 4분할 광 검출기 상에 입사된 광점의 크기에 따른 optical beam deflection방식에서의 변위 측정감도의 변화에 대해 살펴보았다. 3mW의 헬륨-네온 레이저를 사용하여 optical beam deflection방식의 광학적 변위 측정 장치를 제작하였으며 광 검출기에 도달하는 광점의 크기를 변화시켜가며 제작된 변위 측정 장비가 나타내는 변위 측정감도를 관찰하였다. 또한 광 검출기에 도달하는 optical beam power를 원형의 균일한 분포를 지닌 광점으로 설정하여 광점 크기의 변화에 따른 변위 측정감도를 계산하였다. 측정된 결과와 계산을 통하여 검출기 상에 입사하는 광점의 크기가 작을수록 변위 측정감도가 증가함을 알 수 있었으며 이는 나노미터 급의 변위측정 장비 개발에 있어 광 검출기에 도달하는 광점의 크기를 최소화함으로써 변위 측정감도를 최적화 할 수 있음을 나타낸다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.61-65
• /
• 2001

A new flaw detection technique using by SH angle beam method has been discussed. The SH-wave is horizontally polarized shear wave and the surface SH wave has a characteristic of traveling along near surface layer. The surface SH wave technique is valuable for the detection of fatigue cracks at fillet weld heels which cannot be detected by other ultrasonic technique such as angle beam technique and The dispersion curves of it has simple characterization. In this work, using these beneficial chraterization, quality evaluation of spot weld with ultrasonic sound intensity of SH-wave passing through nugget area of spot weld are verified experimentally.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.74-83
• /
• 2001

In this study, internal fatigue crack initiation and propagation behavior were investigated by triple piece spot welded specimen. To estimate fatigue life of the specimen varied with shape and thickness, Crack tip opening angle(CTOA) correlated with stress intensity factor was used as the stiffness parameter. The relation between fatigue life and CTOA can be arranged by the quantitative equation for each specimen by experiment. In addition, the variation of stress distribution was solved and the effect on fatigue crack behavior was examined by finite element method(FEM).

• 한국산학기술학회논문지
• /
• 제7권3호
• /
• pp.314-318
• /
• 2006

본 연구에서는 점 용접된 박판이 파괴되어 가는 동적 과정을 시뮬레이션 함으로서 그 점용접부의 강도를 해석하는데 있다. 위판이 아래의 판에 대하여 늘어난 후 0.64 ms가 경과된 시점에서 서로 점 용접된 위판 및 아래 판이 떨어져 나감을 알 수 있다. 비교적 위판 및 아래 판 가운데의 용접 부위에서 최대의 von Mises 응력을 나타내고 있다. 용접이 깨어지는 시점인 0.64 ms 부근에서는 그 내부에너지가 상당히 감소되고 운동에너지는 급격히 증가됨을 알 수 있다. 미끄럼 에너지는 시간이 경과됨에 따라 계단형으로 감소되어 경과 시간이 0.2 ms 부근에서 0이 되다가 그 후로는 미끄럼 에너지가 음수의 값이 되어 두 판들은 오히려 고착이 되는 것을 알 수 있다.

• 한국잡초학회지
• /
• 제12권4호
• /
• pp.368-373
• /
• 1992

귀리에 alachlor를 처리(處理)할 때 변화(變化)되는 단백질(蛋白質)을 분석(分析)한 결과요약(結果要約)하면 다음과 같다. Alachlor 처리시(處理時) 단백질(蛋白質) 합성(合成)은 $1{\times}10^{-4}$M에서 5.8%, $1{\times}10^{-3}$M에서는 86.5% 억제(抑制)되는 현상(現象)을 보였지만 $1{\times}10^{-5}$M 이하(以下)의 농도(濃度)에서는 증가(增加)되는 현상(現象)을 보였다. 귀리의 근단분열조직(根端分裂組織)에서 추출(抽出)된 단백질(蛋白質)은 100 kd 이하(以下)의 polypeptide로 구성(構成)되어 있으며, alachlor 처리시(處理時) 47kd 이상(以上)의 고분자(高分子) 단백질(蛋白質)들은 억제(抑制)되었지만 23kd 이하(以下)의 저분자(低分子) 단백질(蛋白質)들은 오히려 증가(增加)되는 현상(現象)을 보였다. 이차원적(二次元的) 전기영동(電氣泳動) 결과(結果) alachlor 처리시(處理時) 83kd의 1, 2 spot, 70kd의 3, 4 spot, 47.5kd의 5, 6 spot의 polypeptide가 억제(抑制)된 반면(反面), 20kd의 7 spot, 16kd 의 8, 9, 10 spot는 증가(增加)되는 현상(現象)을 보였다. 또한 귀리 근단(根端) 분열조직(分裂組織)은 산성(酸性) 단백질(蛋白質)로서, 주(主)로 중성(中性) 부위(部位)에 큰 polypeptide spots들이 존재(存在)하고 있으며, 작은 spots을은 산성(酸性)쪽에 분리(分離)되어 나타났다.

• 한국정밀공학회지
• /
• 제21권6호
• /
• pp.94-101
• /
• 2004

From the Beckmann's reflection model of wave incident, reflected light from a surface is known to have not only specular but also diffuse components. The specular component dominant a surface for a mirror-like surface is distributed on the almost the same area as the spot on the surface, but the diffuse component region dominant f3r a rough surface spreads scattered on the larger areas than the spot. Therefore, statistic parameters from the scattered light distribution are more meaningful in the diffuse region, while the magnitude of rather meaning in the specular region. In usual, there need two sensors to acquire two kinds of information: Photo-detector for light intensity magnitude and image sensor for light intensity distribution. But dual sensor scheme requires a beam splitter usually to feed light to each sensor, and moreover there is not a combination rule to relieve the different sensor characteristics. In this study a new method is proposed for acquisition of the dual information using only an image sensor. Specular region is established on an image area being distinguished from a diffuse component, and laser power is adjusted so that no pixel of the image sensor in the specular region is saturated. Simulation based on the light reflection theory and the experimental results are quite well matched, and thus the proposed method was proved to be very useful for mirror-like surface measurement.

• Journal of Biosystems Engineering
• /
• 제19권3호
• /
• pp.232-246
• /
• 1994

This study was conducted to develop the long-tenn storage method to minimize the black spot occurred on the surface of persimmons stored in the films at low temperature. The storage experiments were done with different films and persimmon varieties at $0^{\circ}C$ storage condition for 5 months, and then the physical and chemical characteristics of persimmons were tested monthly. The results were as follows : 1. The film 160 made from zeolites showed highest performance in well storings sweet persimmons for 5 months, compared with other films by eyesight. The initial moisture condensation inside the films seemed to cause the black spots on persimmons, and the effect of the film holes was never significant to prevent the black spots. 2. The sugar content was ranged from $14^{\circ}Brix$ to $15^{\circ}Brix$ regardless of film types and persimmom varieties, and it changed little for storage of 5 months. 3. The decrease rate of persimmom weight in the film 160 and 180 was 0.3% for storage of 5 months, while those in other films reached to 2%. The decrease rate of persimmon weight was least in the film 160 and 180. 4. The hardness of Fuyu least decreased in the films 160 and 380. It was changed from 36 kg/cnf to 8-27 $kg/cm^2$, and that of Charyang was from 31 $kg/cm^2$ to 8-10 $kg/cm^2$ for storage of 5 months. The hardness of Charyang rapidly decreased as storage period increased. 5. The average rate of black spot(defect rate) of Fuyu measured by a computer image processing system was least in the film 160 by 0.5%, but those in other films was ranged from about 5% to 20% for storage of 5 months. The rate of black spot of Charyang was less than that of Fuyu among most of films. 6. The intensity, hue, and saturation in persimmon color changed according to storage period. Especially, the intensity of persimmon colors decreased as storage period increased, but it was least in the film 160. 7. An integrated long-term storage method of sweet persimmons was suggested in the basis of the experiments and literature reviews.