• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.64-70
• /
• 2001

A three-dimensional, porous collagen/chitosan complex sponge was prepared to closely simulate basic extracellular matrix (ECM) constitutes, collagen and glycosaminoglycan. The complex sponge was prepared by a lyophilization method and had the regular network with highly porous structure, suitable for cell adhesion and growth. The pores were well interconnected, and their distribution was fairly homogeneous. The complex sponge was crosslinked using 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) to increase its boilogical stability and enhance its mechanical properties. The crosslinking medium has a great effect on the inner structure of the sponge. The homogeneous, porous structure of the sponge was remarkably collapsed in an aqueous crosslinking medium. However, the morphology of the sponge remained almost intact in a water/ethanol mixture crosslinking milieu. Mechanical properties of the collagen/chitosan sponge were significantly enhanced by EDC-mediated crosslinking. The potential of the sponge as a scaffold for tissue engineering was investigated using a Chinese hamster ovary cell (CHO-K1) line.

• Journal of Species Research
• /
• v.12 no.1
• /
• pp.38-47
• /
• 2023

Seven new species of genus Dysidea (Demospongiae: Dictyoceratida: Dysideidae) are described from Jejudo Island and Geomundo Island, Korea. These new species are compared with other reported species in fibre structure and arrangement, and cored detritus. Dysidea reticulum n. sp. is similar to D. glavea in skeletal structure but differ in sponge shape. Dysidea simplex n. sp. is close to D. glavea with loosely arranged skeletal structure but fibres in this new species are not cored with large sands. Dysidea pyeongdaensis n. sp. is characterized by tube-like surface oscules open toward the sandy bottom. Dysidea capillus n. sp. is similar to D. dokdoensis in skeletal structure, but differs in long surface conules. Dysidea mukriensis n. sp. is close to D. corallina in distinct dense surface conules, but differs in sponge shape and skeletal structure. Dysidea membrana n. sp. is similar to D. sabulum in primary fibres cored with numerous large sands, but differs in sponge surface conules and secondary fibres. Dysidea chujaensis n. sp. is unique in the sponge shape and skeletal structure.

• Animal Systematics, Evolution and Diversity
• /
• v.36 no.4
• /
• pp.277-284
• /
• 2020

Four new species of genus Scalarispongia (Demospongiae: Dictyoceratida: Thorectidae) are described from Jejudo Island, Korea. These new species of Scalarispongia are compared with 14 reported species of the genus by the skeletal structure. Scalarispongia songakensis n. sp. is similar to S. lenis in sponge shape but differs in skeletal structure and meshes are not divided into two sections. The length of secondary fibres between primary fibres of this new species is much longer than S. lenis'. Scalarispongia radicula n. sp. is resembles S. songakensis in sponge shape, but this new species has pseudo-tertiary fibres at the sponge base. Scalarispongia maraensis n. sp. is very similar to S. subjiensis in sponge shape but primary fibres of this new species are not simple because fibres have wide webbing. Scalarispongia massa n. sp. is characterized by the large mass sponge shape and numerous open oscules form a long ling on the ridge of the sponge.

• Journal of Marine Bioscience and Biotechnology
• /
• v.7 no.2
• /
• pp.42-51
• /
• 2015

The community structure of cultivable bacteria associated with the marine sponge, Petrosia corticata, collected from Jeju Island in summer (September) of 2012 and winter (January) of 2013, were compared by the PCR-ARDRA method. Bacterial strains were cultured for 4 days at $26^{\circ}C$ on Zobell medium and marine agar medium. After PCR amplification of 16S rRNA gene of individual strains, the restriction enzymes MspI and HaeIII were used to make restriction patterns. As a result, 24 ARDRA patterns from the summer sponge and 20 ARDRA patterns from the winter sponge were obtained. The sequencing result of 1-3 selected strains from each pattern showed over 98% similarities with the known sequences from the public database. At the phylum level, the bacterial community structures of both sponges (summer and winter) were identical qualitatively and composed of 4 phyla : Proteobacteria, Actinobacteria, Bacteroidetes, and Firmicutes. Alphaproteobacteria accounted for 42.5% of total in summer sponge and 25.2% in winter, decreasing in the winter sample. Gammaproteobacteria accounted for 27.5% of total in summer sponge and 35.2% in winter, increasing in the winter sample. At the genus and species level, summer sponge had more diverse bacterial communities than winter sponge. Actinobacteria, Bacteroidetes, and Firmicutes increased in the winter sample.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.212-219
• /
• 2016

The alumina hollow fiber membranes were prepared by spinning and sintering a polymer solution containing suspended alumina powders. For determine pore structure of hollow fiber membranes formed by different solvent-nonsolvent interaction rate, dimethylsulfoxide (DMSO), dimethylacetamide (DMAc), triethylphosphite (TEP) were prepared in dope solution by solvent, polyethersulfone (PESf) and polyvinylpyrrolidone (PVP) were used as a polymer binder and additive. The pore structure of hollow fiber membranes was characterized using scanning electron microscope (SEM). The alumina hollow fiber membranes prepared by DMSO, DMAc were had the asymmetric structure mixed sponge-like and finger-like morphology, while TEP solvent were had single sponge-like structure. The prepared hollow fiber membranes were analyzed gas permeation and mechanical strength experiment also. The hollow fiber membrane having single sponge-like structure was had high gas permeation performance. On the contrary to this, more finger-like morphology was less gas permeation performance.

• Journal of Species Research
• /
• v.9 no.2
• /
• pp.147-161
• /
• 2020

Seven new species of two genera Scalarispongia and Smenospongia (Demospongiae: Dictyoceratida: Thorectidae) are described from Gageo Island and Jeju Island, Korea. Five new species of Scalarispongia are compared to nine reported species of the genus by the skeletal structure. Scalarispongia viridis n. sp. has regular ladder-like skeletal pattern arranged throughout the sponge body and has pseudo-tertiary fibres. Scalarispongia favus n. sp. is characterized by the honeycomb shape of the surface and is similar to Sc. flava in skeletal structure, but differs in sponge shape. Scalarispongia lenis n. sp. is similar to Sc. regularis in skeletal structure but has fibers that are smaller in size. Scalarispongia canus n. sp. has irregular skeletal structure in three dimensions and ladder-like which comes out of the surface and choanosome. Scalarispongia subjiensis n. sp. has pseudo-tertiary fibres and its regular ladder-like skeletal pattern occurs at the choanosome. Two new species of Smenospongia are distinguished from the other 19 reported species of the genus by the skeletal structure. Smenospongia aspera n. sp. is similar to Sm. coreana in sponge shape but new species has rarely secondary web and thin and thick bridged fibres at near surface. Smenospongia mureungensis n. sp. has very simple skeletal structure.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.7
• /
• pp.534-537
• /
• 1994

A new metabolite 2 of bastadin class and the previously reported bastadins 3 and 4 were isolated from the sponge Ianthella basta collected in Indonesia.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.219-225
• /
• 2000

This study is to develop a Fe-based disc brake lining with sponge structure for rolling stock of 150km/h train and to concept design with 3 groove type for brake disc reducing hot hair-crack and certainly friction coefficient. The developing brake lining would be to presumption of saving 300 million won during one year

• Korean Journal of Materials Research
• /
• v.32 no.11
• /
• pp.508-514
• /
• 2022

Piezoelectric composite films which are enabled by inorganic piezoelectric nanomaterials-embedded polymer, have attracted enormous attention as a sustainable power source for low powered electronics, because of their ease of fabrication and flexible nature. However, the absorption of applied stress by the soft polymeric matrices is a major issue that must be solved to expand the fields of piezoelectric composite applications. Herein, a flexible and porous piezoelectric composite (piezoelectric sponge) comprised of BaTiO₃ nanoparticles and polydimethylsiloxane was developed using template method to enhance the energy conversion efficiency by minimizing the stress that vanishes into the polymer matrix. In the porous structure, effective stress transfer can occur between the piezoelectric active materials in compression mode due to direct contact between the ceramic particles embedded in the pore-polymer interface. The piezoelectric sponge with 30 wt% of BaTiO₃ particles generated an open-circuit voltage of ~12 V and a short-circuit current of ~150 nA. A finite element method-based simulation was conducted to theoretically back up that the piezoelectric output performance was effectively improved by introducing the sponge structure. Furthermore, to demonstrate the feasibility of pressure detecting applications using the BaTiO₃ particles-embedded piezoelectric sponge, the composite was arranged in a 3 × 3 array and integrated into a single pressure sensor. The fabricated sensor array successfully detected the shape of the applied pressure. This work can provide a cost-effective, biocompatible, and structural strategy for realizing piezoelectric composite-based energy harvesters and self-powered sensors with improved energy conversion efficiency.

• Natural Product Sciences
• /
• v.11 no.1
• /
• pp.50-53
• /
• 2005

Bioassay-directed fractionation of the lipophilic extract of a marine sponge Sarcotragus sp. led to the isolation of a known trisoxazole containing macrolide, mycalolide B (1). Its structure was identified by NMR and MS analyses. This is the first report on the isolation of macrolide from a sponge of the genus Sarcotragus (Order: Dictyoceratida).