• Design & Manufacturing
• /
• 제6권2호
• /
• pp.6-11
• /
• 2012

A counter shaft gear is an important part in the transmission system of vehicle. Its shape is relatively complicated and should meets high strength. Traditionally the counter shaft gear has been manufactured as follows; a spline body is firstly machined for teeth and then attached to the main gear body by frictional welding, and finally is finished by grinding. Therefore it is necessary to develop a new manufacturing technology eliminating both frictional welding and grinding processes. In this study, a new hot forging process was proposed and designed so that the spline body with teeth and main gear body are formed as one body. Finite element simulations and experimental works were peformed for design of forging processes to get the quality final precision-forged product. Consequently the most suitable blocker process could be obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권2호
• /
• pp.295-303
• /
• 2009

Forging of square spline was investigated by using finite element methods in this study. Spline is widely used by torque transmitter in the fields of automobile, aircraft, and shipping etc. Friction on the surface of die is regarded as the most important factor to improve the dimensional accuracy for complete forming of spline teeth. Finite element simulation was carried out to improve the formability of the spline, especially remove unnecessary burrs which were extruded in gap between the die and the punch. To remove the burrs, various friction factors are considered on the surfaces of the die in the simulations and punch flat surface was designed. The simulated results were compared with experimental ones. As a results, it is possible to control the growth of burrs and improve formability of spline teeth by applying various friction factors and design of punch flat surface.

• 대한전자공학회논문지SP
• /
• 제41권4호
• /
• pp.51-61
• /
• 2004

치과 분야에서 치아가 개별적으로 조작될 수 있는 3차원 치아 모델은 치과 치료와 시술 시뮬레이션을 위해 중요한 요소이다. CT영상으로부터 이러한 치아 모델을 재구성하기 위해서는 각 치아의 경계를 정확하게 분할할 수 있어야 한다. 그러나 기존의 3차원 재구성 시스템에서 사용되는 임계화 방법은 치아들과 치아와 비슷한 밝기의 치조골이 서로 인접해서 나타나는 CT 영상열에서 효율적이지 못하다. 본 논문에서는 CT영상에서 부드러운 치아 경계를 추출하기 위해 B-spline 곡선 적합을 이용한 치아 분할 방법을 제안한다. 성공적인 적합을 위해서 이전 슬라이스의 분할정보와 적응 최적 임계화 방법을 기반으로 한 초기경계 생성방법을 제안한다. 그리고 적합과정에서 이웃한 유사한 물체에 적합되는 것을 줄일 수 있는 유전자 알고리즘을 이용한 B-spline 적합방법을 제안한다. 평가결과 제안된 알고리즘은 개별치아의 경계를 성공적으로 검출하였으며 이를 이용하여 시술과 치료 과정의 시뮬레이션을 위한 치아의 3차원 모델을 정확하고 부드럽게 생성할 수 있음을 보였다.

• 소성∙가공
• /
• 제15권7호
• /
• pp.512-517
• /
• 2006

In this paper, the cold extrusion process for internal spline forming using a thin and long tube has been analyzed by using a rigid plastic finite element code. The internal spline consists of 10 tooths. The cold extrusion process has been focused on the comparisions of load-stroke relation and filling states of the teeth according to design parameters. The design parameters involve extrusion ratio, extrusion angle and friction factor. The internal spline forming can cause the buckling and folding during the cold extrusion process because of using a thin and long tube. The optimum design parameters have been obtained through rigid-plastic finite elements analysis. The extrusion ratio and extrusion angle have great effects on the deformation characteristics of the cold extrusion process.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.24-30
• /
• 2012

In this study, the hot forging technology for precision forming of spline teeth of the inner race in the auto-transmission was developed in order to minimize its finishing allowance. Several blocker and finisher shapes for the precision hot forging process of the inner race were proposed and the forging processes were analyzed using the three-dimensional finite element method. The optimum hot forging process was obtained considering some parameters such as metal flow patterns, forging defects and forming load. Blocker and finisher dies for the hot forging process were designed by selecting the most suitable shapes obtained from the finite element analysis. Experimental works were also performed in order to verify the optimum design of hot forging process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.206-211
• /
• 1996

Closed-die forging of external spine is analysed using an upper bound elemental technique. The kinematically admissible velocity field for three-dimensional deformation in forging of the external spine with trapezoidal teeth was obtained. The upper bound to the deforming load necessary and the the deformed configurations are predicted using integration of the formulation of energy expressions which were obtained from B(upset forging method) were considerd in the present analysis and the theoretical results compared with experimental ones Experiments were carried out on plasticine as model material at room temperature where talcum powder was used as a lubricant. The present investigation revealed that the analytical method B predicts a reducet forging load and improved configuration better than method A for the forged products.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.54-58
• /
• 2012

A counter shaft gear is an important part in the transmission system of vehicle. Its shape is relatively complicated and should meets high strength. Traditionally it has been manufactured as follows; the counter shaft gear has consisted of a clutch and helical body with teeth which are forged and machined for teeth respectively and then attached by frictional welding. In this study, a new hot forging process was proposed and designed so that the counter shaft gear is formed as one body without divide it into two parts. Furthermore, the precision forging process has been developed for the clutch teeth without additional grinding.

• 한국정밀공학회지
• /
• 제14권2호
• /
• pp.102-112
• /
• 1997

This paper describes the method that can construct kinematically admissible velocity fields for forging of gear-like components which have tooth shape around the cylinder. The kinematically admissible velo- city fields for the various gear-like components, involute spur gear, trapezoidal spline, square spline, ser- ration and trochoidal gear, were constructed by pilling up the velocity components according to the shape of tooth and billet. The billets, of hollow and solid, were Al 2218 and 2024. To verify the method, the analyses and experiments were carried out and compared with each other. For analyses, the half pitches of com- ponents were divided into several deformation regions based on their tooth profile. A neutral surface was used to represent the inner flow of material during forging. Its location varied with the energy optimazation and its contour varied with the number of teeth. In experiment, the contour of material filling up the tooth zone is hyperbolic curve caused by the frictional drag on the interface of die-wall/workpiece but, in the analysis, it is an arc which retains the same contour during all forging operation.

• 대한기계학회논문집A
• /
• 제41권11호
• /
• pp.1125-1130
• /
• 2017

$170^{\circ}C$의 고온에서 작동하는 자동변속기 토크컨버터의 리액터와 끝단 레이스 두 부품간 이빨이 서로 맞닿는 부분의 응력을 분산시키고, 수명을 증가시키기 위하여 치(이빨), 스플라인 두 형태의 리액터의 치형상을 FEM 최적화하였다. 최적화에 선행하여 서로 다른 재료로 된 두 부품의 열팽창에 의한 간격을 해석하였으며, 그 결과 열팽창 후에 치형 리액터는 약 0.1 mm, 스플라인형 리액터는 약 0.08 mm의 추가 간격이 발생한다는 것을 확인하였다. 형상최적화 결과 두 가지 형태의 리액터 치가 모두 비대칭 사다리꼴 형상으로 최적화 되었다. 이로 인해 치형 리액터의 경우 기존 비최적화 모델 대비, 최대등가응력이 24.5 % 감소하였으며, 스플라인형 리액터는 기존 비최적화 모델 대비 최대등가응력은 9.3 % 감소하였으며, 축 방향 두께는 13 % 감소하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1775-1780
• /
• 2003

A hybrid finite element analysis was used to analyze the influence of ring gear rim thickness and spline number on the static properties of an epicyclic gear system with manufacturing errors. Both of these parameters affected the bearing force and critical stress. The effect of changes in the rim thickness on the load sharing between the gears depended on the type of manufacturing error. Ring flexibility improved the load sharing between planetary gears only in systems with planet tooth thickness or planet tangential errors; for other types of error, ring flexibility worsened the load sharing. To improve load sharing, rim thickness and spline number should be controlled within a specific range. The effect of the ring gear boundary condition was more apparent in a system with errors than in a normal system.