• Journal of Powder Materials
• /
• v.28 no.4
• /
• pp.293-300
• /
• 2021

We investigate the effect of phosphorous content on the microstructure and magnetic properties of Fe_83.2Si_5.33-0.33xB_10.67-0.67xP_xCu_0.8 (x = 1-4 at.%) nanocrystalline soft magnetic alloys. The simultaneous addition of Cu and P to nanocrystalline alloys reportedly decreases the nanocrystalline size significantly, to 10-20 nm. In the P-containing nanocrystalline alloy, P atoms are distributed in an amorphous residual matrix, which suppresses grain growth, increases permeability, and decreases coercivity. In this study, nanocrystalline ribbons with a composition of Fe_83.2Si_5.33-0.33xB_10.67-0.67xP_xCu_0.8 (x = 1-4 at.%) are fabricated by rapid quenching melt-spinning and thermal annealing. It is demonstrated that the addition of a small amount of P to the alloy improves the glass-forming ability and increases the resistance to undesirable Fe_x(B,P) crystallization. Among the alloys investigated in this work, an Fe_83.2Si₅B₁₀P₁Cu_0.8 nanocrystalline ribbon annealed at 460℃ exhibits excellent soft-magnetic properties including low coercivity, low core loss, and high saturation magnetization. The uniform nanocrystallization of the Fe_83.2Si₅B₁₀P₁Cu_0.8 alloy is confirmed by high-resolution transmission electron microscopy analysis.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.4107-4107
• /
• 2001

Previous works have shown the viability of NIRS technology for the prediction of fatty acids in Iberian pig fat, but although the resulting equations showed high precision, in the predictions of new samples important fluctuations were detected, greater with the time passed from calibration development to NIRS analysis. This fact makes the use of NIRS calibrations in routine analysis difficult. Moreover, this problem only appears in products like fat, that show spectrums with very defined absorption peaks at some wavelengths. This circumstance causes a high sensibility to small changes of the instrument, which are not perceived with the normal checks. To avoid these inconveniences, the software WinISI 1.04 has a mathematic algorithm that consist of create a “Repeatability File”. This file is used during calibration development to minimize the variation sources that can affect the NIRS predictions. The objective of the current work is the evaluation of the use of a repeatability file in quantitative NIRS analysis of Iberian pig fat. A total of 188 samples of Iberian pig fat, produced by COVAP, were used. NIR data were recorded using a FOSS NIRSystems 6500 I spectrophotometer equipped with a spinning module. Samples were analysed by folded transmission, using two sample cells of 0.1mm pathlength and gold surface. High accuracy calibration equations were obtained, without and with repeatability file, to determine the content of six fatty acids: miristic (SECV$\sub$without/=0.07% r$^2$$\sub$without/=0.76 and SECV$\sub$with/=0.08% r$^2$$\sub$with/=0.65), Palmitic (SECV$\sub$without/=0.28 r$^2$$\sub$without/=0.97 and SECV$\sub$with/=0.24% r$^2$$\sub$with/=0.98), palmitoleic (SECV$\sub$without/=0.08 r$^2$$\sub$without/=0.94 and SECV$\sub$with/=0.09% r$^2$$\sub$with/=0.92), Stearic (SECV$\sub$without/=0.27 r$^2$$\sub$without/=0.97 and SECV$\sub$with/=0.29% r$^2$$\sub$with/=0.96), oleic (SECV$\sub$without/=0.20 r$^2$$\sub$without/=0.99 and SECV$\sub$with/=0.20% r$^2$$\sub$with/=0.99) and linoleic (SECV$\sub$without/=0.16 r$^2$$\sub$without/=0.98 and SECV$\sub$with/=0.16% r$^2$$\sub$with/=0.98). The use of a repeatability file like a tool to reduce the variation sources that can disturbed the prediction accuracy was very effective. Although in calibration results the differences are negligible, the effect caused by the repeatability file is appreciated mainly when are predicted new samples that are not in the calibration set and whose spectrum were recorded a long time after the equation development. In this case, bias values corresponding to fatty acids predictions were lower when the repeatability file was used: miristic (bias$\sub$without/=-0.05 and bias$\sub$with/=-0.04), Palmitic (bias$\sub$without/=-0.42 and bias$\sub$with/=-0.11), Palmitoleic (bias$\sub$without/=-0.03 and bias$\sub$with/=0.03), Stearic (bias$\sub$without/=0.47 and bias$\sub$with/=0.28), oleic (bias$\sub$without/=0.14 and bias$\sub$with/=-0.04) and linoleic (bias$\sub$without/=0.25 and bias$\sub$with/=-0.20).

• Journal of Sericultural and Entomological Science
• /
• v.27 no.2
• /
• pp.54-63
• /
• 1985

This studies has been carried out how to effect on electrostafic propensity of synthetic fabrics by coating with 0.5% acrylic polymer solution which was previously developed by the author to improve anticrease nature of silk. The work conditions are: (A) Applied synthetic polymer was acrylic polymer 525, developed by the author. (B) Electrostatic voltage for various fabrics were carried out by Korea standard abrasion partner with Korea standard (KS K 0905) cotton, nylon, polyester and the self sample fabric. (C) Applied fabrics for the investigations were carried out by using abrasion partner with Korea standard (KS K 0905) cotton, nylon, polyester and the self sample fabric. (D) Electrostatic propensity investigations were carried out by use of sample as silk, nylon, polyester and acrylic fabrics, seperating before finish or after finish. (E) Washing after the finish or the original fabric was carried out by Korea standard method, KS K 0465. Through the investigations, he happened to find many interesting matters and the obtained results are as followings. 1. Electrostatic voltage for the finished fabrics increased more than their original silk, nylon, acrylic fabrics except polyester fabric. (See Table 5) 2. Electrostatic voltage for the finished polyester against K.S. polyester decreased remarkably than the original fabric test. 3. In spite of no problem on electrostatic propensity of silk, it showed high electrostatic voltage between the same nature fabric abrasion, because silk is very weak against abrasion and because the test method had been developed to be useful for only synthetic fabrics. 4. Electrostatic voltage increased more in case of abrasion between different nature of fabrics than the same nature of fabrics. 5. Electrostatic voltage of each fabric increased by repeat of wash. 6. Many investigation data were followed with Contact Electrification Series Principle, another word, the farther each other located fabric on the series abrasion was, the higher electrostatic voltage. (See Fig. 6) 7. Such investigation gives warning of use on the mix fiber spinning service as far as concern with electrification. 8. It may also call attention for such increase of electrification in case any finishing of silk textile.

• The Journal of Korean Medical History
• /
• v.18 no.2
• /
• pp.197-227
• /
• 2005

Heojun was the top scientist on Medicine in the 16th and 17th centuries and wrote the Dongeubogam describing the top-level medical theory and technology. So far, his outlook on nature has been disregarded even though his medicine is still effective. Through this study, I would like to know if his outlook on nature as well as his medicine is still effective. The conclusions are as follows: 1. According to his output, the origin of the universe started from the spinning of One Gi(一氣) which is quite different from Hawking's theory. Hawking assumed that the origin of the universe started from the Big-bang and will end to the Big-crunch. However, the current report on the origin of a star is quite similar to Heojun's theory and we acknowledge that his view on the origin of the universe is still effective. 2. According to his output, the universe repeats expanding and contracting forever while Hawking assumed it will come to the end, the Big-crunch, based on the expanding universe theory. Some scientists assists that Hawking's assumption should have some contradictions. Now, we acknowledge that Heojun's universal cycling theory which corresponds with modern physical theories is still effective, which would lead to a new environmental movement. 3. His view on the structure of the universe is quite different from the output of the current science, which results from his thought that the nature should be reviewed from the point of human's view. His view on the structure will be able to be updated based on the output of the current science. 4. The universe analogy started from the East Asian area as well as the Greek and Roman area in the ancient. The idea has disappeared since the scientific revolution era in the West while the idea has been deepened and abundant in the East and has become one of the major philosophical bases. Heojun emphasized its importance from the beginning of his book. 5. The nation analogy has been popular all times and places. According to his output, governing a country is like controlling one's body. 6. According to Needham's output, the universe analogy and the nation analogy were based on the ancient developed alchemy. And Harper assumed that Taiosm was based on the macrobiotic hygiene which was developed by the ancient developed alchemists. We acknowledge that xian(仙) cult, macrobiotic hygiene, medicine, alchemy and the ancient philosophy started from our ancients. Heojun's output restored our ancient tradition by combining the macrobiotic hygiene and philosophy with medicine. 7. Roughly predicting yearly weather would be unacceptable by the current scientist but Heojun's yearly weather forecast is still used in the clinic and seems effective to prepare from any epidemic disease. 8. 'Day and Night' and Four seasons are the most important factors to the macrobiotic hygiene according to the Dongeubogam. The new environmental movements should be based on the most important factors, otherwise the human beings as well as the environment would fail to survive. 9. Wind, Coldness, Heat, Humidity, Dryness and Fire represents weather. The six weather factors represent one of six phases of a year which is decided by the areal factors. Heojun preferred the six factors generated in the body itself to them from the outside. He thought a human being was a universe and the six factors generated in the body responded to the factors of the outside. 10. According to his output, Heat and Humidity are the most important factors which make a human being ill. 11. Life span, disease, food, and dwelling are dependent upon the geographical feature, according to Heojun's output. In addition, one's appearance and his five viscera and the six entrails depend on the food as well as the geographical feature. 12. Heath is related with the environment and they effects upon each other. If one is weak, he will be deeply effected by the nature. On the other hand, if one is strong, he will effect on the nature. That's why people live together. 13. According to Heojun's work, the society is an important factor comprising the environment. During a peaceful era, the society becomes stable and human beings are stable as well while they will be on fire during a chaotic era. 14. Medicine deals with human beings who live in the nature, so any medical book cannot be excellent unless it has any description on the nature. Heojun's outlook on the nature turned out to be logical and suitable even from the point of the current view and it is still effective as if his clinical knowledge and technology are still effective. Something unsuitable may be substituted with the output of the current science.

• Journal of Bio-Environment Control
• /
• v.28 no.4
• /
• pp.454-460
• /
• 2019

The purpose of this study is to analyze the distribution characteristics of mist spray particle size by devising a rotary mist spraying device to develop the evaporative salt water desalination system. The rotary mist spraying device was consisted of a BLDC sirocco fan, a spinning fan, a fan fixed shaft and a salt water supply device etc. In this study we analyzed the characteristics of spray particle size and distribution according to the variation of sirocco fan surface roughness(Ra, ${\mu}m$), revolutions(rpm) and salt water flow rate(mL/min). When sirocco fan surface roughness(Ra) was in the range of $0.27{\sim}7.65{\mu}m$, the spray particle size was $0.117{\sim}1.360{\mu}m$. And then more than 90% of spray particles were found to be less than $0.50{\mu}m$. When sirocco fan surface roughness(Ra) was in the range of $12.70{\sim}22.84{\mu}m$, the spray particle size was $2.51{\sim}184.79{\mu}m$ and more than 98% of spray particles were found to be less than $13.59{\mu}m$. To analyze the effect of fan rotation speed on the size and distribution of spray particles, when surface roughness Ra was fixed $0.27{\mu}m$ and fan rotation speed and salt water flow rate was respectively changed at 3,800~5,600 rpm and 2.77~8.28 mL/min, spray particle size was $0.314{\sim}0.541{\mu}m$. And when salt water flow rate was 9.74 mL/min and fan rotation speed was 3,800~5,200 rpm, spray particle size was in the range of $29.29{\sim}341.46{\mu}m$ and in case of 5,600 rpm more than 98.23% of spray particles were in the range of $2.51{\sim}13.59{\mu}m$.