• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.1083-1088
• /
• 2004

This paper deals with the vibration and stability of a circular cylindrical shaft, modeled as a tapered thin-walled composite beam and spinning with constant angular speed about its longitudinal axis, and subjected to an axial compressive force. Hamilton's principle and the assumed mode method are employed to derive the governing equations of motion. The resulting eigenvalue problem is analyzed, and the stability boundaries are presented for selected taper ratios and axial compressive force combinations. Taking into account the directionality property of fiber reinforced composite materials, it is shown that for a shaft featuring flapwise-chordwise-bending coupling, a dramatic enhancement of both the vibration and stability behavior can be reached. It is found that by the structural tailoring and tapering, bending natural frequencies, stiffness and stability region can be significantly increased over those of uniform shafts made of the same material. In addition, the particular case of a classical beam with internal damping effect is also included.

• Korean journal of applied entomology
• /
• v.43 no.2
• /
• pp.143-153
• /
• 2004

Non-spinning syndrome of Bombyx mori has been serious issue in sericulture industry near Kyungbuk area. This study was focused on the analysis of the mechanism and on screening candidate chemicals inducing the anti-metamorphosis of the silkworms. Rearing temperatures or initial body weight of the final instar larvae did not affect a normal larval to pupal metamorphosis of B. mori. However, pyriproxyfen (a juvenile hormone (JH) agonist) induced follicle patency significantly even at its 10$\^$-8/ M concentration and inhibited metamorphosis of B. mori in both developmental time and dose dependent manners. Pyriproxyfen induced JH esterase (JHE) activity and downregulated expression of JH binding protein of 5. mori. These results suggests that pyriproxyfen induced JHE activity as a JH agonist and that the elevated JHE activity degraded endogenous JH and resulted in JHBP gene expression. Based on the fact that the JH agonist induced follicle patency and inhibited metamorphosis of B. mori, follicle patency bioassay suggested that three commercial pesticides including simazine, molinate or alachlor were proved to give potent JH agonistic effect on B. mori. Further direct exposure experiments to these candidates are required to determine the chemicals responsible for the non-spinning syndrome of 8. mori.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.73-76
• /
• 2002

최근 링 정방기의 생산속도 증가로 인해 사절 및 사물성에 큰 영향을 미치는 정방장력의 중요성이 더욱 커지고 있다. 링 정방장력은 스핀들 회전수, 트래블러 중량, 링직경, 콥 직경 등과 같은 공정인자와 링 레일 상하운동에 따른 벌룬 높이, 얀 가이드에서의 실 굴절각도, 콥의 권취 반경 및 공기저항 등에 의해서도 영향을 받게 된다[1]. 이와 관련하여 링 정방장력 해석[2], 정방 공정인자가 정방장력에 미치는 영향[3] 및 정방 공정인자가 방적사 물성에 미치는 영향[4] 등의 연구가 많이 이루어져 왔다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.111-114
• /
• 2002

실크는 우수한 광택, 촉감, 물성을 바탕으로 하여 인류에 있어 최고의 의류용 섬유로서 널리 이용되어 왔으며 최근에는 생체적합성 등을 활용한 의료용 및 생물공학용 소재로서 응용하고자 하는 연구가 활발하게 진행중이다[1-2]. 그러나 실크는 합성섬유와는 달리 누에가 토사하는 그 순간에 그 구조 및 형태가 결정되어 고정되는 단점을 안고 있어 다양한 특성이 요구되는 의류용 및 산업용 분야로의 응용에 한계가 있다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.102-102
• /
• 2003

TLCP/polyester composite fibers (TPCFs) based on melt blends of PEN, PET, and TLCP were prepared by melt blending and spinning process to achieve high performance fibers. Reinforcement effect and TLCP fibrillar structure resulted in improvement of mechanical properties for TPCFs. The increase in the apparent crystallite size was attributed to the development of larger crystallites and more ordered crystalline structures in the annealed TPCFs. Molecular orientation was an important factor to determine mechanical property of TPCFs.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.11a
• /
• pp.145-146
• /
• 2009

This is studies about development of light nylon fabric and development of low denier NCD/nylon6 filament using mixed spinning technique of nylon6 and NCD(Nylon Cation Dyeable) polymer. We study how the manufactured fabrics effect on downproof & windproof properties according to conditions of low denier N/NCD filament yarn, fabrication, and dyeing and finishing.

• Proceedings of the Korean Fiber Society Conference
• /
• 2000.04a
• /
• pp.41-44
• /
• 2000

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.304-312
• /
• 2010

The function of IRCM(Infrared Countermeasures) jamming is to cause the missile to miss its intended target by disturbing the seeker tracking process. This paper analyzes the jamming effect of IRCM jamming for a stationary reticle seeker. The phase error containing the azimuth angle information of target is analyzed for the intensity, frequency and duty ratio variation of the jammer pulse signal. We confirmed that the more the jammer frequency is similar to the spinning frequency of the stationary seeker, the more jamming effect is high.

• Composites Research
• /
• v.29 no.4
• /
• pp.145-150
• /
• 2016

Polyvinylidene fluoride (PVDF) as a representative polymer with the piezoelectric property has been studied since the 1960s. Crystalline structure of poly(vinylidene fluoride) polymer is composed of five different crystal structure of the polymer as a semi-crystalline. Among the various crystal structures, ${\beta}-type$ crystal exhibits a piezoelectricity because the permanent dipoles are aligned in one direction. Generally ${\beta}-form$ crystal structure can be obtained through the transformation of the ${\alpha}-form$ crystal structure by the stretching and it can increase the amount through the after treatment as poling process after stretching. ${\beta}-form$ crystal structure the PVDF fibers produced by wet spinning is formed through a diffusion mechanism of a polar solvent in the coagulation bath. However, it has a disadvantage that the diffusion path of the solvent remains as pores in the fiber because the fiber solidification occurs simultaneously with the diffusion of the polar solvent. These pores play a role in reducing effect of poling process owing to effect of disturbances acting on the polarization by the electric field. In this work, the drying method using the microwave was introduced to remove more effectively the residual solvent and the pore within PVDF fibers produced through wet-spinning process and piezoelectric PVDF fibers was produced by transformation of the remaining ${\alpha}$ form crystal structure into ${\beta}-crystal$ structure through the stretching process.

• Polymer(Korea)
• /
• v.24 no.5
• /
• pp.656-663
• /
• 2000

The Effects of thermal history during the melt spinning process on the mechanical properties and crystallinity of polylactic acid (PLLA) fibers have been studied. Thermal history applied on PLLA during the melt process caused the decrease of number-average molecular weights and this resulted in the lowering of orientation and crystallinity in PLLA fibers. As a result, the longer applied thermal history, the less tensile strength and modulus, and the higher elongation at break. It was also found that primary factor for controlling crystallinity of PLLA fiber was the stress induced crystallization while the thermal induced crystallization had a little effect on the crystallinity of PLLA fibers. However, the thermal induced crystallization turn out to be important in the crystallinity developed by annealing of PLLA fibers.