• The Korean Journal of Ceramics
• /
• 제4권3호
• /
• pp.231-234
• /
• 1998

LaNiO3 thin films were fabricated on various substrates by spin-coating technique using metal naphthenates as starting materials. Highly-oriented LaNiO3 films with smooth and crack-free surfaces were grown on SrTiO3 (100) and LaAlO3(100) substrates, while films on MgO(100) and Si(100) substrates showed random orientation. In this study, we concluded that lattice-mismatches between LaNiO3 films and substrates used affect film's properties.

• 한국세라믹학회지
• /
• 제28권11호
• /
• pp.859-864
• /
• 1991

High quality lead titanate thin films were fabricated by spin coating on a silicon substrate. The resulting dried gel layers were uniform in thickness through 2$\times$2 $\textrm{cm}^2$ area, and polycrystalline perovskite structures developed almost crack free with a heat treatment above 50$0^{\circ}C$ in films with thickness above 360 nm. Metastable pyrochlore structures were observed in films with thickness of 160 nm when heat treated at 500 and $600^{\circ}C$, but these structure did not appear in films with thickness of 360 nm. The thickness dependence in crystal structure of films was studied. by varying the substrate condition and analyzing the interface between the film and substrate. In native oxide films on silicon stbstrates, amorphous dried gel layers were heterogeneously nucleated. Metastable cubic pyrochlore structure could be crystallized in amorphous native oxide.

• Progress in Superconductivity
• /
• 제3권2호
• /
• pp.188-192
• /
• 2002

To introduce flux pinning center in HTS-BSCCO system, nano-size MgO particles were uniformly distributed within the Bi-2223 grain by partial hydration of MgO. The existing method MgO doped Bi-2223 used nato-size MgO powders, which resulted in agglomeration during mixing or grain growth during heat-treatment due to the high surface energy of the fine particles. By hydration of the MgO surface, the agglomeration of the MgO powders was avoided and the size of remaining MgO core was controlled by changing hydration medium and time. The thin film obtained by spin coating of (Bi_$1.8/Pb_{0.4}$)$Sr_2$$_{Ca}$$2.2/Cu_3$ $O_{y}$ nitrate solution mixed with hydrated MgO showed the even distribution of nano-size MgO particles in the Bi-2212 grains.s.s.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.192-195
• /
• 2000

Antimony doped tin oxyde thin films have been deposited by sol-gel method using non-alkoxide precursor SnCl$_2$$.$2H$_2$O as host and SbC1$_3$ as dopant material. Using spin coating method, thin films of thickness up to 200nm have been uniformly deposited on Corning 1737F non-alkali glass substrates. Effect of Sb doping concentration and heat treatment on electrical and optical properties was investigated. Heat treatment was performed at the temperature from 350$^{\circ}C$ to 650$^{\circ}C$ in flowing O$_2$. The resulting ATO films showed widely changing electrical resistivity and optical transmittance values in the visible spectrum depending on the composition and firing condition.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.754-761
• /
• 2017

알코올에 분산된 콜로이드 실리카를 아크릴 단량체인 pentaerythritol triacrylate (PETA)와 혼합시킴에 의해 UV 경화형 친수성 코팅 용액을 제조하였다. 또한 이 친수성 코팅 용액을 PC 기재 위에 스핀코팅 시킨 후 10 min 동안 UV 경화시킴에 의해 친수성 코팅 도막이 제조되었다. 이 과정 중 코팅 용액 중의 콜로이드 실리카 양을 10~50 g으로 변화시켜 코팅 도막의 친수성에 미치는 영향을 살펴보았다. 그 결과 코팅 용액 중의 콜로이드 실리카 양은 코팅 도막의 친수성에 큰 영향을 미치며, 콜로이드 실리카 양이 30 g인 경우에 $37^{\circ}$의 가장 낮은 접촉각과 H의 우수한 연필경도를 나타내었다.

• 한국세라믹학회지
• /
• 제30권9호
• /
• pp.695-700
• /
• 1993

In this study, we prepared Pb-Ti stock solution by sol-gel processing and deposited PbTiO3 thin film on a Pt coated SiO2/Si wafer by spin coating using the stock solution. We used lead acetate trihydrate and titanium isopropoxide. The stock solution was partially hydrolized and finally a 0.25M coating solution was prepared. We achieved spin coating at 4000rpm for 30 seconds and heated the thin film at 375$^{\circ}C$ for 5 minutes and at $600^{\circ}C$ for 5 minutes successively, first and second heating state. And the thin film was finally sintered at 90$0^{\circ}C$ for 1 hour in the air. The upper electrode of the thin film was made by gold sputtering and was cricle shape with radius 0.4mm. Measured dielectric constant, dissipation factor and phase transition temperature(Cuire Temp.) were about 275, 0.02 and 521$^{\circ}C$ respectively. To observe ferroelectric characteristics we calculated Pr(remnant polarization) and Ec(coercive field) byhysteresis curve. Ec was 72kV/cm and Pr was 11.46$\mu$C/$\textrm{cm}^2$.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.516-519
• /
• 2011

Indium tin oxide (ITO) coatings were made using an ITO slurry and an ITO sol. This was achieved by dispersing nanosized ITO powder in a mixed solvent without any dispersant and developing an adhesive ITO sol from indium acetate and tin tetrachloride in a mixture of DMF and n-butanol. Coating was carried out in one step by spin coating an ITO slurry, which was then followed by an ITO sol over it. Here, the sol penetrates into the nano ITO particle layers to make them adhere to each other as well as to a glass substrate. This is then followed by sintering at 500$^{\circ}C$ for 1 h to produce a uniform film consisting of ITO particles of about 50 nm and 10 nm. ITO films were obtained with sheet resistances from 450 to 1500 ohm/${\Box}$ by varying spin speed and concentration. Transmittance is higher than 90% at 550 nm.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.89-89
• /
• 1997

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.35-38
• /
• 2003

ITO/glass 기판 위에 발광물질로서 poly(2-methoxy-5-(2-ethylhexoxy)-1,4-phenylenevinylene (MEH-PPV)를 이용하여 스핀코팅법(spin coating)으로 Glass/ITOM/MEH-PPV/Al 구조를 가지는 고분자 유기 발광 다이오드를 제작하였다. MEH-PPV 박막형성시 열처리온도에 따른 다이오드의 전기적, 광학적 특성을 조사하였다. 열처리 온도를 $65^{\circ}C$에서 $170^{\circ}C$로 증가함에 따라 유기 발광다이오드의 발광휘도는 10V 인가전압에서 630 cd/$\m^2$에서 280 cd/$\m^2$로 크게 감소하였다. 또한 $65^{\circ}C$에서 열처리한 시료의 경우 약 2 lm/W의 최대 발광효율을 나타내었다. 이러한 결과는 높은 온도에서 열처리시 MEH-PPV 유기 형광층과 전극간의 상호반응에 의한 계면 거칠기의 증가와 새로운 절연층의 형성 등과 관련이 있는것으로 판단된다.

• 반도체디스플레이기술학회지
• /
• 제14권1호
• /
• pp.61-65
• /
• 2015

We have fabricated poly(3,4-ethylenedioxythiophene) : poly(4-styrenesulfonate) (PEDOT : PSS) thin films using a slotdie coater for the applications of OLED lightings. It is demonstrated that the properties of slot-die coated PEDOT : PSS films are comparable with those of spin-coated ones. Namely, the average and peak-to-peak roughness of the slot-die coated 50-nm-thick PEDOT : PSS film are measured to be as low as 0.247 nm and 1.3 nm, respectively. Moreover, we have obtained excellent thickness uniformity (~1.91%). With the slot-die coated PEDOT : PSS films, we have fabricated green phosphorescent OLED devices. For comparison, we have also fabricated OLED devices with spin-coated PEDOT : PSS films. Both show almost no discrepancy in device performance. The power efficiency (25.4 lm/W) and emission uniformity (77%) of OLEDs with slot-die coated PEDOT : PSS films are shown to be slightly lower than those (27.3 lm/W, 80%) of OLEDs with spin-coated PEDOT : PSS films at the luminance of 1,000nit, increasing the feasibility of using a slot-die coating process for the fabrication of large-area OLED lighting sources at a competitive price.