• 한국가시화정보학회지
• /
• 제5권1호
• /
• pp.3-8
• /
• 2007

We present simple methods for fabricating high aspect-ratio polymer nanostructures on a solid substrate by rigiflex lithography with tailored capillarity and adhesive force. In the first method, a thin, thermoplastic polymer film was prepared by spin coating on a substrate and the temperature was raised above the polymer's glass transition temperature ($T_g$) while in conformal contact with a poly(urethane acrylate) (PUA) mold having nano-cavities. Consequently, capillarity forces the polymer film to rise into the void space of the mold, resulting in nanostructures with an aspect ratio of ${\sim}4$. In the second method, very high aspect-ratio (>20) nanohairs were fabricated by elongating the pre-formed nanostructures upon removal of the mold with the aid of tailored capillarity and adhesive force at the mold/polymer interface. Finally, these two methods were further used to fabricate micro/nano hierarchical structures by sequential application of the molding process for mimicking nature's functional surfaces such as a lotus leaf and gecko foot hairs.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.237-242
• /
• 1998

$80SiO_2-20TiO_2$(mol%)의 무색투명한 비정질 박막을 현미경용 슬라이드 유리판과 사파이어 위에 tetraethyl orthosilicate와 titanium trichloride의 전구체 용액을 사용하여 스핀코팅방법으로 제조하였다. 코팅 후 $750^{\circ}C$에서 열처리된 박막은 높은 투과율과 낮은 반사율을 보였다. 슬라이드 유리판에 코팅한 $SiO_2-TiO_2$ 박막의 경우에 나트륨이온과 산소 간의 강한 상호작용에 의하여 고온과 높은 습도에서도 안정성이 우수하였다.

• 한국안광학회지
• /
• 제12권1호
• /
• pp.85-90
• /
• 2007

안경렌즈의 무반사 코팅물질로 사용되는 황화아연(Zinc Sulphide : ZnS)의 단일박막을 실리콘과 슬라이드 유리 기판위에 스핀코팅방법으로 증착하였다. 박막 증착 후 변입사각분광타원계(VASE : Variable Angle Spectroscopic Ellipsometer)를 사용하여 1.5~5.0 eV 광 에너지 영역에서 타원 각(ellipsometry angle) ${\Delta}$, ${\Psi}$를 측정하였다. 이 측정결과들을 Jellison Modine 분산관계식을 사용하여 최적맞춤하고, 매개변수들을 구하여 박막의 광학상수인 굴절계수 $n({\lambda})$와 소광계수 $k({\lambda})$를 결정하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1462-1465
• /
• 2005

In this report, the FE characteristics of carbon nanotubes (CNTs) treated using both thermal annealing and mechanical coatings on the as-grown CNTs system atically studied. It was found that in the high temperature annealed samples, CNTs were attacked at its root during annealing due to a small amount of oxygen, and were pulled out of the substrate in places after FE measurements because of the contact resistance. However, for the mechanically coated samples both with spin on glass (SOG) and polymethyl methacrylate (PMMA), CNTs were found to be nearly intact after FE measurements and showed reliable FE characteristics over repeatable voltage scan. The reliability of CNTs during FE could be owing to the strong adhesion of CNTs to the substrate both by SOG and PMMA coatings.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.329-334
• /
• 2016

Hydrogen is eco-friendly alternative energy source and the photoelectrochemical water splitting is believed to be one of the promising methods for hydrogen production. Many researchers have studied several potential photocatalysts to increase the photoelectochemical performance efficiency for hydrogen conversion. In this study, the GO (graphene oxide) was prepared by Tour's method and was dispersed in precursor solutions of $WO_3$ and $BiVO_4$. Those precursor solutions were spin-coated on FTO glass and several photocatalyst thin films of $WO_3$, $BiVO_4$ and $WO_3/BiVO_4$ were prepared by calcination. The morphologies of prepared photocatalyst thin films were measured by scanning electron microscope. The photoelectrochemical performances of photocatalyst thin films with rGO (reduced graphene oxide) and without rGO were analyzed systematically.

• 한국전기전자재료학회논문지
• /
• 제34권5호
• /
• pp.321-326
• /
• 2021

We fabricated BiAlO thin film by a solution process with a brush coating to be used as liquid crystal (LC) alignment layer. Solution-processed BiAlO was coated on the glass substrate by brush process. Prepared thin films were annealed at different temperatures of 80℃, 180℃, and 280℃. To verify whether the BiAlO film was formed properly, X-ray photoelectron spectroscopy analysis was performed on Bi and Al. Using a crystal rotation method by polarized optical microscopy, LC alignment state was evaluated. At the annealing temperature of 280℃, the uniform homogenous LC alignment was achieved. To reveal the mechanism of LC alignment by brush coating, field emission scanning electron microscope was used. Through this analysis, spin-coated and brush coated film surface were compared. It was revealed that physical anisotropy was induced by brush coating at a high annealing temperature. Particles were aligned in one direction along which brush coating was made, resulting in a physical anisotropy that affects a uniform LC alignment. Therefore, it was confirmed that brush coating combined with BiAlO thin film annealed at high temperature has a significant potential for LC alignment.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권5호
• /
• pp.285-295
• /
• 1999

Electroluminescent(EL) devices based on organic materials have been of great interest due to their possible applications for large-area flat-panel displays. They are attractive because of their capability of multi-color emission, and low operation voltage. An approach to realize such device characteristics is to use active layers of lanthanide complexes with their inherent extremely sharp emission bands in stead of commonly known organic dyes. In general, organic molecular compounds show emission due to their $\pi$-$\pi*$ transitions resulting in luminescence bandwidths of about 80 to 100nm. Spin statistic estimations lead to an internal quantum efficiency of dye-based EL devices limited to 25%. On the contrary, the fluorescence of lanthanide complexes is based on an intramolecular energy transfer from the triplet of the organic ligand to the 4f energy states of the ion. Therefore, theoretical internal quantum efficiency is principally not limited. In this study, Powders of TPD, $Eu(TTA)_3(phen) and AlQ_3$ in a boat were subsequently heated to their sublimation temperatures to obtain the growth rates of 0.2~0.3nm/s. Organic electrolumnescent devices(OELD) with a structure of $glass substrate/ITO/Eu(TTA)_3(phen)/AI, glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AI and glass substrate/ITO/TPD/Eu(TTA)_3(phen)/AIQ_3AI$ structures were fabricated by vacuum evaporation method, where aromatic diamine(TPD) was used as a hole transporting material, $Eu(TTA)_3(phen)$ as an emitting material, and Tris(8-hydroxyquinoline)Aluminum$(AlQ_3)$ as an electron transporting layer. Electroluminescent(EL) and current density-voltage(J-V) characteristics of these OELDs with various thickness of $Eu(TTA)_3(phen)$ layer were investigated. The triple-layer structure devices show the red EL spectrum at the wavelength of 613nm, which is almost the same as the photoluminescent(PL) spectrum of $Eu(TTA)_3(phen)$.It was found from the J-V characteristics of these devices that the current density is not dependent on the applied field, but on the electric field.

• 한국음향학회지
• /
• 제42권5호
• /
• pp.412-421
• /
• 2023

초음파 뇌 자극술을 통하여 뇌 심부의 국소 지역에 있는 뇌 세포의 활성화를 유도할 수 있으며, 이를 통하여 저하된 뇌 기능을 치료하는데 효과가 있음이 보고되어 왔다. 반면, 초음파 자극의 종류에 따라 신경 변조의 효율과 방향이 달라질 수 있음이 알려져 있어, 적절한 초음파 자극의 종류를 확립하는 연구가 중요하다. 따라서, 본 논문에서는 이를 효과적으로 최적화 하기 위해 세포 배양시 사용되는 커버슬립 기반의 초음파 변환자를 제안하고자 한다. 균일한 초음파 자극을 전도하기 위해서 폴리머 압전소자(Poly-vinylidene fluoride-trifluorethylene, PVDF-TrFE)를 스핀 코팅하고 패를린 절연층을 상단에 적층시켜 음압 출력을 극대화 시켰다. 개발된 초음파 변환자 융합 커버슬립은 초음파자극기 표면에 배양된 수십개의 신경세포에 균일하고 정확한 초음파 자극을 전달 할 수 있고, 자극에 따른 세포의 반응을 형광 현미경으로 실시간 관찰 가능하다. 따라서, 동일한 초음파 자극에 대한 세포의 반응 신호를 최대 수십개 세포로부터 동시에 획득 가능하므로, 반응 신호를 평균 한다면 낮은 강도의 초음파 자극에 따른 뇌 세포의 미세한 반응을 검출할 수 있을 뿐만 아니라, 초음파 변환자와 물의 표면 등에서 발생하는 정현파에 의한 자극의 왜곡 현상을 줄일 수 있어서 사용자가 원하는 초음파 자극을 정확하게 세포로 전달 가능하다. 이렇게 개발된 초음파 변환자를 통해 변환자 표면에 배양된 별세포에서 6 MHz, 0.2 MPa의 저강도 초음파 자극에 의해 유도된 칼슘 반응을 성공적으로 관찰할 수 있었다.

• 한국재료학회지
• /
• 제14권8호
• /
• pp.542-546
• /
• 2004

We report a new fabrication process for high performance triode type CNT field emitters and their superior electrical properties. The CNT-based triode-type field emitter structure was fabricated by the conventional semiconductor processes. The keys of the fabrication process are spin-on-glass coating and trim-and-leveling of the carbon nanotubes grown in trench structures by employing a chemical mechanical polishing process. They lead to strong adhesion and a uniform distance from the carbon nanotube tips to the electrode. The measured emission property of the arrays showed a remarkably uniform and high current density. The gate leakage current could be remarkably reduced by coating of thin $SiO_{2}$ insulating layer over the gate metal. The field enhancement factor(${\beta}$) and emission area(${\alpha}$) were calculated from the F-N plot. This process can be applicable to fabrication of high power CNT vacuum transistors with good electrical performance.

• 한국분말재료학회지
• /
• 제9권5호
• /
• pp.341-345
• /
• 2002

Nanoparticles of $Fe_2O_3$ with a mean particle size of 4-30 nm have been prepared by a pulsed wire evaporation method, and its structural and magnetic properties were studied by SQUID magnetometer and Mossbauer spectroscopy. From the main peak intensity of XRD and absorption rate of Mossbauer spectrum, the amounts of $\gamma-Fe_2O_3$ and $\alpha-Fe_2O_3$ in as-prepared sample are about 70% and 30%, respectively. The coercivity (53 Oe) and the saturation magnetization (14 emu/g) are about 20% of those of the bulk $\gamma-Fe_2O_3$. The low value of coercivity and saturation magnetization indicate that the $\gamma-Fe_2O_3$ phase nearly shows the spin glass-like behavior. Analysis of the set of Mossbauer spectrum indicates a distribution of magnetic hyperfine fields due to the particle size distribution yielding 20 nm of average particle size. The magnetic hyperfine parameters are consistent with values reported of bulk $\gamma-Fe_2O_3$ and $alpha-Fe_2O_3$. A quadrupole line on the center of spectrum represents of superparamagnetic phase of $\gamma-Fe_2O_3$ with a mean particle size of 7 nm or below.