• Korean Management Science Review
• /
• v.26 no.2
• /
• pp.113-134
• /
• 2009

Rapid knowledge change, heightened competition. and shortened product life cycles are just a few of the constants faced by many buying firms in today's markets. Many buying firms have responded to these conditions by outsourcing non-core activities. The Quality and cost of a product or service offered in the market is a function, not only of the capabilities of the firm, but also of the network of suppliers who provide inputs to the firm. When a firm finds its suppliers lacking in performance it can help suppliers to develop their capabilities. There are three main goals for this study. The first goal is to identify the important factors that precede and influence firms' investment in knowledge transfer activities. The second goal is to investigate the relationship between knowledge transfer activities and the consequences of knowledge transfer activities. The last goal is to explore the effects of knowledge change speed. To analyze the validity of the research model and the hypotheses. the data are collected from 238 manufacturing firms through the administration of structured Questionnaires. The results of structural equation model analyses indicate that the model is generally valid and 11 of 14 hypotheses are supported by the data. Reasons for and implications of these observed relationships are discussed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.651-657
• /
• 2023

Railroad alignment improvements and operating speed increase occupy considerable portion in recent railroad market. Developing countries have limitations to construction of new high speed railroads due to the burden of budgets and the lack of demands, and the projects of operating speed increase arepracticallyrecommended. Thisstudy developed the methodologyto provide the railroad alignment design alternatives and the costs by upgrading the "Intelligent Railroad Alignment Design Program (ei-Rail)" which has been used to obtain the alignment plans and construction costs for railroad construction projects. The program provides the cost for alignment improvement, design drafts and the effects of operating speed increase with the input of target improvement speed and the prevailing railroad alignment on the numerical map. It is then expected for the ei-Rail program to be used for the supporting tool for the railroad alignment improvement projects.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.6 s.237
• /
• pp.804-808
• /
• 2005

A pneumatic tire is made up of many flexible filaments of high modulus cord of natural textile, synthetic polymer, glass fiber, or fine hard drawn steel embedded in and bonded to a matrix of low modulus polymetric material. Adhesion property of these materials is very important in tire durability safety because belt-leaving-belt tread separation reduces the ability of a driver to control a vehicle, whether or not the separation is accompanied by a loss of air. In this study adhesion test of carcass-belt-tread is conducted on material properties of 5 PCR tire model, which are on sale in domestic market and analyzed adhesion properties. For those tire models FMVSS 109 indoor high speed durability test is conducted to analyze the correlation between adhesion force and high speed performance of tires and found the correlation between the two test results.

• Journal of Welding and Joining
• /
• v.31 no.1
• /
• pp.33-37
• /
• 2013

Robotized MIG welding of large aluminium components for high speed trains is state-of-the-art. The implementation of online laser cameras enables seam tracking and adoptive modification of welding parameters. A constant fill is achieved regardless of the gap tolerances. Friction Stir Welding has been introduced to the market as a reliable and fast joining technology. The advantages of high welding speeds and the elimination of arc light, fumes and liquefaction in the welding spot lead to economical realisation of heavy-duty gantry systems. FSW robots offer a high flexibility with regard to welding of curved parts, and can be equipped with laser cameras for exact joint tracking.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.958-961
• /
• 2002

The optical disk drive is a basic option on the PC now. So the lower price and higher read/write speed goods are now on market. These trends make many difficulties to produce more reliable drives, comparing when they are treated as high price stuff. In mechanical terms, the lower price and higher read/write speed drive make higher vibration and noise, lower stiffness, even severe fracture of cheap and low quality disk, problems. Due to the internal crash of P/U inside of the drive, the failure of drives, inferior drives, increase more and more by the careless transportation and the originated low stiffness parts. This report is the introduction of the FE simple model to decrease the internal P/U crash problems, and the results.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.296-305
• /
• 2009

Since the beginning of civilization, people live in the times that changes rapidly everyday. Above all things, In April, 2004 the first opening of KTX(high-speed railway) that has been considered as the greatest revolutionary project shrinks the whole nation into a quarter of a day life zone and has repeated the constant change and development. But now, In comparison with ordinary train system KTX fails to notice revenue for travel-product and other many factors of increased revenue. This study introduces and analyzes the present condition of high-speed railway and indicate 'the plan to increase revenue' and 'the effect of creating revenue' through a travel-product on the basis of the travel-products connected with KTX. This study focuses on 'KTX memory train travel' and propose revenue and advertisement-effect created from targeting the middle-aged market. In addition, For improving KORAIL's image and approaching the customer more and more friendly, it grasp diverse events and advertisement plans.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.349-360
• /
• 2024

The purpose of this study is to analyze the performance of the road network according to the penetration rate of autonomous vehicles (AV) of Level 4 or higher and the change in traffic volume. First, prior studies related to vehicle control variables of AV were reviewed, and future traffic demand in 2040, which is predicted to have a 50 % market share of AVs, was reflected in the simulation analysis. In addition, the change in traffic flow of continuous and intermittent flows was analyzed by increasing the AV market penetration rate and traffic volume of passenger cars, trucks, and buses by 25 % step by step from 0 to 100 %. As a result of the analysis, it was confirmed that the travel time increased as the traffic increased, and the pattern of decreasing the travel time due to the increase in the share of AVs, that is, the development of technology, can also be confirmed. Furthermore, it was also confirmed that the traffic speed showed a trend of increasing as the share of AVs increased. In this study, it was confirmed that the law of diminishing marginal rate of substitution (MRS) was satisfied by calculating the MRS according to the combination of traffic volume and speed while increasing the market penetration rate of AVs. Furthermore, it was confirmed that the convexity of the indifference curve was also satisfied in both intermittent and continuous traffic flow environments.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1995.06a
• /
• pp.137-140
• /
• 1995

In the paper, CDMA's vocoder algorithm, QCELP, was analyzed. And, 16-bit programmable DSP core for QCELP was designed. When it is used two MACs in DSP, we can implement low-power DSP and estimate decrease of parameter computation speed. Also, we implemented in FIFO memory using register file to increase the access time of the data. This DSP was designed using logic synthesis tool, COMPASS, by top-down design methodology. Therefore, it is possible to cope with rapid change at mobile communication market.

• Journal of Welding and Joining
• /
• v.21 no.2
• /
• pp.57-63
• /
• 2003

Since new types of vehicles or structures made from thin aluminum alloy are under rapid development and some products are already on the market, welding of aluminium sheet is increasing. MIG(Metal Inert Gas), MIG-Pulse, TIG(Tungsten Inert Gas) welding are the typical Ai welding. MIG welding has the advantage of high speed, but it is difficult to apply to the thin plate, because of bum-through by the high heat input and spatter. MIG-Pulse welding can weld without spatter and burn-through, but when the gap exists at the welding joint, there is quite a possibility of bum-through. TIG welding is difficult to weld at a high speed. AC Pulse welding alternates between DCEP(Direct Current Electrode Positive) and DCEN(Direct Current Electrode Negative). DCEN is higher wire melting rate than DCEP, while lower temperature of droplet than DCEP. In AC Pulse welding, far fixed welding current, wire melting rate increases as the EN ratio increases. For fixed wire feed rate, welding current decreases as the EN ratio increases. Because of these features, the temperature of droplet, the depth of penetration, the width of bead decrease and the reinforcement height increases as EN ratio increases, and these are able to weld at a high speed, lower heat input. It is the purpose of this study that design of AC pulse current waveform for MIG welding of Al sheet and estimation of output characteristic.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.403-411
• /
• 1999

The steel plate for shadow mask is used in a Cathode-ray tube of TV monitor and is the strictest product in surface quality because hundreds thousand of holes are perforated in a plane of 25 ${\times}$25 inches. To mass-produce this product, a reversible cold rolling mill for silicon steel was used and the rolling technology and the activity for quality improvement are described in this work. Because the steel plate is a mild steel, which is very sensitive to strip-breakage even in a low tension, we reset the minimum tension values matching to the operating conditions. The roll mark due to the multi-segmented araangement of shape controlling roll was prevented by hardening the intermediate shape controlling roll and by changing the existing working-roll into a HSS (Hig Speed Steel) roll. The scratch caused by the speed difference between a idle roll and a strip was prevented by increasing the roll roughness. With these activities, the steel plate for shadow mask can be stable. The continuous improvement of quality is, however, required for the customer satisfaction both of domestic and overseas market.