• 대한전자공학회논문지SD
• /
• 제39권5호
• /
• pp.74-86
• /
• 2002

본 논문은 결정 궤환 구조를 갖는 차동 위상 검출기의 고속 데이터 처리를 위한 VLSI 구조를 제안한다. 기존 차동 위상 검출 방식의 낮은 BER 성능을 극복하기 위해 DF-DPD, DPD-RGPR, DFDPD-SA 등의 다중 심볼 검출 방식이 제시되었다. 이러한 검출 방식들은 참조 위상으로 사용되는 이전 심볼에서의 잡음 효과를 작게 하기 위하여 검출된 위상을 궤환시키는 구조를 갖고 있다. 하지만, 검출된 위상을 궤환시키는 작용은 데이터 처리 속도를 기존의 차동 위상 검출기보다 느리게 한다. 본 논문에서는 결정 궤환 구조를 갖는 차동 위상 검출기가 기존의 차동 위상 검출 방식처럼 고속으로 데이터를 처리할 수 있는 VLSI 구조를 제안하였다. 제안된 구조는 'M-1' 번째 과정에서 'M' 번째 과정을 미리 계산하는 선계산(pre-calculation) 방식과 'M-1'번째 과정에서 예견 위상들을 궤환시키는 선결정 궤환(pre-decision feedback) 방식을 갖는다. 본 논문에서 제안된 구조는 VHDL(Very-high-speed-IC Hardware Description Language)를 사용하여 RTL(Register Transfer Level)로 구현되었다. 시뮬레이션 결과, 제안된 구조는 고속으로 데이터를 처리함을 확인하였다.

• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.81-89
• /
• 2023

A simplified calculation method of natural vibration characteristics of high-speed railway multi-span bridge-longitudinal ballastless track system is proposed. The rail, track slab, base slab, main beam, bearing, pier, cap and pile foundation are taken into account, and the multi-span longitudinal ballastless track-beam-bearing-pier-cap-pile foundation integrated model (MBTIM) is established. The energy equation of each component of the MBTIM based on Timoshenko beam theory is constructed. Using the improved Fourier series, and the Rayleigh-Ritz method and Hamilton principle are combined to obtain the extremum of the total energy function. The simplified calculation formula of the natural vibration frequency of the MBTIM under the influence of vertical and longitudinal vibration is derived and verified by numerical methods. The influence law of the natural vibration frequency of the MBTIM is analyzed considering and not considering the participation of each component of the MBTIM, the damage of the track interlayer component and the stiffness change of each layer component. The results show that the error between the calculation results of the formula and the numerical method in this paper is less than 3%, which verifies the correctness of the method in this paper. The high-order frequency of the MBTIM is significantly affected considering the track, bridge pier, pile soil and pile cap, while considering the influence of pile cap on the low-order and high-order frequency of the MBTIM is large. The influence of component damage such as void beneath slab, mortar debonding and fastener failure on each order frequency of the MBTIM is basically the same, and the influence of component damage less than 10m on the first fourteen order frequency of the MBTIM is small. The bending stiffness of track slab and rail has no obvious influence on the natural frequency of the MBTIM, and the bending stiffness of main beam has influence on the natural frequency of the MBTIM. The bending stiffness of pier and base slab only has obvious influence on the high-order frequency of the MBTIM. The natural vibration characteristics of the MBTIM play an important guiding role in the safety analysis of high-speed train running, the damage detection of track-bridge structure and the seismic design of railway bridge.

• 정보처리학회논문지B
• /
• 제19B권4호
• /
• pp.243-248
• /
• 2012

정보검색 분야에서 벡터 모델, 문서 클러스터링 등은 입력 문서 개수가 증가할수록 유사도 계산 속도가 시스템의 성능에 많은 영향을 미치고 있다. 본 논문에서는 문서 유사도 계산 성능을 향상시키기 위하여 유사도를 계산하는 연산을 CPU 대신에 GPU를 이용하는 CUDA 프레임워크에서 병렬처리 기법으로 구현하는 방법을 제안하였다. 이 방법은 보편적인 방식인 CPU 환경에서 구현했을 때와 비교할 때 최대 15배까지 성능이 향상되었다. 또한, 기존의 CUDA 라이브러리인 CUBLAS와 Thrust를 사용한 방법보다도 각각 5.2배, 3.4배의 성능 개선 효과가 있음을 확인하였다.

• Industrial Engineering and Management Systems
• /
• 제1권1호
• /
• pp.64-72
• /
• 2002

In the field of plant maintenance, data that are gathered by sensors on multiple machines are handled and analyzed. Online or pseudo online data handling is required on such fields. When the data occurrence speed exceeds the data handling speed, multiple data should be handled at a time (batch data handling or pseudo online data handling). If l amount of data are received at one time following N amount of data, how to estimate the new parameters effectively is a great concern. A new simplified calculation method, which calculates the N data's weights, is introduced. Numerical examples show that this new method has a fairly god estimation accuracy and the calculation time is less than 1/10 compared with the case when the whole data are re-calculated. Even under the restriction calculation ability in the apparatus is limited, this proposed method makes the failure detection of equipments possible in early stages with a few new coming data. This method would be applicable in many data handling fields.

• Journal of Power Electronics
• /
• 제16권4호
• /
• pp.1387-1395
• /
• 2016

A method for the identification of mechanical parameters based on integral calculation is presented. Both the moment of inertia and the friction constant are identified by the method developed here, which is based on well-known mechanical differential equations. The mechanical system under test is excited according to a pre-determined low-frequency sinusoidal motion, minimizing the distortion, and increasing the accuracy of the results. The parameters are identified using integral calculation, increasing the robustness of the results against measurement noise. Experimental data are supported by simulation, confirming the effectiveness of the proposed technique. The performance improvements shown here are of use in the design of speed and position controllers and observers. Owing to its simplicity, this method can be readily applied to commercial inverter products.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.378-384
• /
• 2014

Optimization design and robust design are significant measures for improving the performance and reliability of electromagnetic devices (EMDs, specifically refer to relays, contactors in this paper). However, the implementation of the above-mentioned design requires substantial calculation; consequently, on the premise of guaranteeing precision, how to improve the calculation speed is a problem that needs to be solved. This paper proposes a new method for establishing an approximate model for the EMD. It builds a relationship between the input and output of the EMD with different coil voltages and air gaps, by using a user-defined interpolating function. The coefficient of the fitting function is determined based on a quantum particle swarm optimization (QPSO) method. The effectiveness of the method proposed in this paper is verified by the electromagnetic force calculation results of an electromagnetic relay with permanent magnet.

• 한국주조공학회지
• /
• 제14권5호
• /
• pp.412-418
• /
• 1994

Efficient algorithm for the solidification simulation by FDM is described from the practical point of views. If a proper time step ${\Delta}t$ is selected, the calculation is accelerated by implicit algorithm with the temperature recovery method of latent heat method. The implicit routine in the calculation is processed by SOR method(relaxation factor＝1.5, truncation error＝$10^{-4}$). The calculation is more accelerated by linear-interpolated explicite algorithm with a time step larger than the minimum value of the time step. This explicit method, which is applicable to the practical casting simulation problems, produces almost same results with about 40% faster calculation speed compared with the conventional explicit method.

• Current Optics and Photonics
• /
• 제6권1호
• /
• pp.51-59
• /
• 2022

Holographic display technology is one of the promising 3D display technologies. However, the large amount of computation time required to generate computer-generated holograms (CGH) is a major obstacle to the commercialization of digital hologram. In various systems such as multi-depth head-up-displays with hologram contents, it is important to transmit hologram data in real time. In this paper, we propose a rapid CGH computation method by applying an arraying of a down-scaled hologram with the multiplication of a shifted concave lens function array. Compared to conventional angular spectrum method (ASM) calculation, we achieved about 39 times faster calculation speed for 3840 × 2160 pixel CGH calculation. Through the numerical investigation and experiments, we verified the degradation of reconstructed hologram image quality made by the proposed method is not so much compared to conventional ASM.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.466-469
• /
• 2001

In this paper, closed loop V/f control of induction motor has been implemented by the estimated speed. Closed loop V/f control improve the performance of induction motor drive system at low speed compared to open loop V/f control. However, closed loop V/f control need speed sensor. By using the estimated speed, closed loop V/f control is possible without speed sensor. Rotor speed is calculated from the difference between synchronous frequency and slip angular frequency. 3-phase voltage reference is obtained from synchronous frequency. And the PWM technique using space vector PWM is applied in this scheme. In the space vector PWM, effective time of 3-phase voltage reference is used to simplify the calculation of effective voltage time. This scheme is simple to implement and one chip microprocessor was used in experimental system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.932-939
• /
• 2011

This paper deal with technique of tension length calculation for 350km/h high speed catenary system. Tension length affects in facility investment. Possibility of overlap increasing a tension length and the equipment investor decreases in order to decrease. Considers the parameter which specifies and the grudge which is possible long the fact that decides a tension length is the aim which is important plans overhead contact line. The element which decides a tension length with next following; (i) Operating range of tension device, (ii) Change of the horizontal tension which affects possibility of the effect which operates to the line and span, (iii) Tension of wire material the tensile force which is relation, (iv) Wire thermal expantion which relates with a standard temperature, (v) Curve radius, (vi) Wind velocity, (vii) Thermal range of overhead contact wire and mechanical design of tension mechanism etc.